User's Manual
11
Part Names and Functions
Note:
To ensure safe operation, please observe the following precautions:
• Do not bend, drop, or expose the remote control to moisture or heat.
•
For cleaning, use a soft dry cloth. Do not apply benzene, thinner,
spray, or any chemical material.
Remote Control
②
AUTO SET button
Execute the setting of Auto setup (includes Input search, Auto
PC adj. and Auto Keystone functions) in the setting menu
(pp.23, 47)
.
⑤ S-VIDEO button
Select the S-VIDEO input source (p.38).
⑥ Point ▲▼◄►
buttons
– Select an item or adjust the value in the On-Screen Menu (p.21)
– Pan the image in the Digital zoom +/- mode (p.36).
⑬
MUTE button
Mute the sound (p.24).
⑦ SCREEN button
Select a screen mode (pp.26, 35, 44).
⑮ P-TIMER button
Operate the P-timer function (pp.26, 52).
⑩ NO SHOW button
Temporarily turn off the image on the screen (p.26).
⑯ LAMP button
Select a lamp mode (pp.25, 54).
⑱ KEYSTONE button
Correct keystone distortion (pp.23, 37, 45).
⑲ SELECT button
– Execute the selected item (p.21).
– Zoom in or out the image in Digital zoom mode (p.36).
⑧ MENU button
Open or close the On-Screen Menu (p.21).
⑨ FREEZE button
Freeze the picture on the screen (p.25).
⑫ VOLUME +/- buttons
Adjust the volume level (p.24).
① ON/STAND-BY button
Turn the projector on or off (pp.18-20).
③ COMPUTER 1/2 buttons
Select the COMPUTER 1 or COMPUTER 2 input source (pp.27-28, 39).
⑪ D.ZOOM
▲▼
buttons
Zoom in and out the images (pp.25, 36).
⑭ IMAGE button
Select the image mode (pp.26, 33, 41).
⑳ COMPONENT button
Select the COMPONENT input source (p.39).
④ VIDEO button
Select the VIDEO input source (p.38).
⑰ INFO. button
Operate the information function (pp.25, 59).
⑦
⑭
⑩
④
⑲
②
⑧
⑨
⑬
⑰
⑤
⑥
⑪
⑫
⑳
⑯
③
⑱
①
⑮