User's Manual

27
Choose either Computer 1(RGB) or Computer 1(Scart) or Computer 2(Analog) by pressing the INPUT button
on the top control or press the COMPUTER 1 button or Computer 2 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Input Source Selection {(RGB: Computer 1/Computer 2(Analog)}
Computer Input
COMPUTER 1 button
 Note:
•When the Input Search function is set to On 1 or On
2 in the Auto setup function, the input signal will be
searched automatically (p.47).
Computer
1
Top Control
Remote Control
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select Input and
then press the Point
►
or the SELECT button.
Use the Point
▲▼
buttons to select Computer 1.
WhenComputer1isselected,pressthePoint►
buttontoaccessthesubmenuitems.UsethePoint▲
▼buttonstoselecttheRGBinputsourceandthen
press the SELECT button.
Computer 1(RGB)
Computer 1(Scart)
INPUT button
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1(RGB) /
(Component) / (Scart)
Direct Operation
Menu Operation
COMPUTER 2 button
Computer 2 (PC Digital)
Computer 2 (AV HDCP)
Computer 2 (Analog)