User's Manual

28
Choose Computer 2 (PC digital) or Computer 2 (AV HDCP) by pressing the INPUT button on the top control
or press the COMPUTER 2 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Input Source Selection {Computer 2: RGB(PC digital), RGB(AV HDCP)}
 Note:
 •When the Input Search function is set to On 1 or On 2,
the input signal will be searched automatically (p.47).
 •HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.
COMPUTER 2 button
Top Control
Remote Control
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select Input and
then press the Point
►
or the SELECT button.
Use the Point
▲▼
buttons to select Computer 2 and
then press the Point
►
button.
Input Menu
Computer 2 (PC digital)
3
UsethePoint▲▼buttonstoselectRGB(PCdigital)or
RGB(AV HDCP) and then press the SELECT button.
Computer Input
Direct Operation
Menu Operation
INPUT button
Computer 2 (AV HDCP)
Computer 2 (Analog)
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1(RGB) /
(Component) / (Scart)