User's Manual

31
30
CLOCK/TIMER
ON TIME CHANNEL NUMBER
You can select the channel on which the TV turns on as programmed by ON-TIMER.
This function will not work if the TIMER is set to OFF or the current time has not been set.
1) Move cursor to ON CHANNEL and
press CH
/ key.
2) Set channel number you want.
TIME
CLOCK : AM 06:00
TIMER : ON
ON TIME : AM 07:30
OFF TIME : PM 10:15
ON CHANNEL : TV 2
: SEL. + : ENTER :PREV.
CLOCK/TIMER
Move the cursor to
ON TIME by using CH
/ buttons and press the VOL + / -
buttons to set the time. (Refer to page 28)
Move the cursor to OFF TIME by using CH
/ buttons and press the VOL + / -
buttons to set the time.
Press "MENU" to return to the main
menu.
AUTOMATIC POWER-OFF MODE
If the set is not switched off when the TV station stops broadcasting, it will automatically go to
power-off mode after 15 minutes.
44
44
55
55
66
66
NOTES
If you set "ON TIME" and "OFF TIME" with the same time, "NOT AVAILABLE "
message will be displayed.
If the power is disconnected (in case of a power failure) and reapplied later, the
clock operation must be reset.
TIME
CLOCK : AM 06:00
TIMER : ON
ON TIME : AM 07:30
OFF TIME : AM 12:00
ON CHANNEL : TV 2
: SEL. + : ENTER :PREV.
TIME
CLOCK : AM 12:00
TIMER : ON
ON TIME : AM 07:30
OFF TIME : PM 10:15
ON CHANNEL : TV 2
: SEL. + : ENTER :PREV.
OTHER FUNCTIONS
1. Press the MENU button. Move the cursor to FUNCTION by pressing the CH / buttons.
Make a selection by pressing the VOL + button.
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE :ENGLISH
: SEL. + : ENTER : EXIT
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE :ENGLISH
: SEL. + : ENTER : EXIT
FUNCTION
BLUE BACK : OFF
CCD : CCD 1
TILT : 0
BLOCKING
: SEL. + : SET :PREV.