User manual

-ā19ā-
CLOCK
1
2
3
4
DISPLAY MODE CHANGE 1...............................
The display on the unit can be changed by pushing button ➀. Press the DISP button ➀ to switch between the
clock and audio display. When a radio, tape or CD function is performed while the time display is selected, the
audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME 1, 2, 3..................................
To adjust the time, press the DISP button ➀ for more than 2 seconds. The time display blinks.
To adjust the minute, press the  button ➁.
To adjust the hour, press the  button ➂.
To advance the time rapidly, hold the  or  button continuously.
Press DISP button ➀ again to start the clock.
CLOCK RESET 1, 4.........................................
Press DISP button ➀ for more than 2 seconds and the time display blinks. While blinking, press preset button
6 ➃ to skip to the nearest halfĆhour as follows:
Example: 3:00X3:29 ³ 3:00
3:30X3:59 ³ 4:00
S This unit uses a 12Ćhour clock.
S The clock function and radio presets are retained in memory when the audio is switched
off.
Notes