User manual

-ā27ā-
ELECTRICAL CONNECTIONS
ANTENNA PLUG
4Ćspeaker System
(Gray/Black)
(White/Black)
(Gray)
(Green)
(Green/Black)
(Violet)
(Violet/Black)
Front Left
Speaker
Front Right
Speaker
Rear Left
Speaker
Rear Right
Speaker
2. )12V Constant Power Supply (Yellow)
3. )12VAccessory/Switched (Red)
4. Ground Wire (Black)
5. Power Antenna (Blue/Red)
(White)
ę
Left
Speaker
Right
Speaker
2Ćspeaker System
(Gray/Black)
(Gray)
(Green)
(Violet)
(White)
1. ANTENNA SOCKET
(White/Black)
(Violet/Black)
Do Not
Connect
Do Not
Connect
ĜĜ
ę
ĜĜ
ĜĜ
ĜĜ
ęę
ęę
ęę
ę
ĜĜ
ę
ĜĜ
ĜĜ
ĜĜ
ęę
ęę
ęę
(Green/Black)
6. Amplifier Turn On (Blue/White)
S DO NOT connect any speaker wires to the metal body or chassis of the vehicle.
S DO NOT connect the speaker common (-) wires to each other.
S Connect each speaker wire directly to each speaker terminal.
S All speaker common (-) wires must remain floating.
Caution
1
Antennasocket
S Insert the plug fromthe antenna installedin your vehicle into this socket.(Ifyourvehiclehasadualantenna
system, a dual antenna to single antenna cable adaptor may be required.)
2
+12V Constant Power Supply (Yellow)
S Connect this wire to the +12V power terminal which receives power continuously.
S Connect to location drawing 10 A amperage or more.
3
+12V Accessory/Switched(Red)
S Connectthis wire to the terminal which receives power while the ignition switch is at ON or ACCESSORY
position.
S If the ignition switch does not have an ACC position, connect this wire to a +12V power terminal which reĆ
ceives power continuously. (Same as item 2.)
S Connect to location drawing 100 mA amperage or more.
4
Ground wire (Black)
S Connect this wire to the vehicle chassis.
5
Power Antenna (Blue/Red)
S Connect this wire to the control terminal of a Power Antenna.
S When not using a Power Antenna, this wire is not connected.
6
Amplifier Turn On (Blue/White)
S Connect this wire to an external amplifier.
S When not using an external amplifier, this wire is not connected.