CDP-M303 Instruction Manual Personal CD Player CD MOBILE SANYO Canada Inc. www.sanyocanada.
01 02 SAFETY TIPS SAFETY TIPS Thank you for purchasing the SANYO CDP-M303. The CDP-M303 comes with headphones and an AC adapter. CAUTIONS FOR SAFETY Do not take the unit apart. The laser beam used in the unit could harm your eyes. Ê Do not insert pins or other objects inside the unit. This unit is equipped with a safety device which automatically turns the laser beam off when the disc compartment is opened.
03 04 LOCATIONS OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. CD DOOR BACKWARD SKIP/SEARCH BUTTON ALBUM/10+ BUTTON CD MODE BUTTON CD FORWARD SKIP/SEARCH BUTTON CD PLAY/PAUSE BUTTON CD STOP BUTTON EQ/PROGRAM BUTTON VOLUME DOWN BUTTON 1 2 3 10. LCD(Liquid Crystal Display) 11. VOLUME UP BUTTON 12. LINE OUT JACK 13. PHONES JACK 14. BATTERY COMPARTMENT 15. CD DOOR OPEN SWITCH 16. DC INPUT JACK 17. HOLD SWITCH 18.
05 06 POWER SUPPLY Plug one end of the AC adaptor into the DC IN jack, then plug the other end into AC wall outlet. NOTE ON ALKALINE BATTERIES Ê When replacing the alkaline batteries, use two new batteries of the same type. Do not mix a used battery with a new one or mix different types of batteries. Ë When inserting the batteries, mistakenly inserting even one with improper polarity will cause leakage. Ì Never charge, heat, disassemble, or throw batteries into a fire.
07 08 PLAYING A DISC PLAYING A CD Be sure to reduce the volume before plugging in or unplugging the headphones/earphones. Ê Plug the cord from a pair of headphones/earphones into the PHONES jack. Ë Slide the OPEN switch to open the CD door. Í Close the CD door, press down PLAY/PAUSE button, and CD begins to spin. Then " " appears on the display. OPEN Ì Ñ If you want to stop playing, press the STOP button. The total number of tracks and total playing time (e.g.
09 10 PLAYING A DISC FORWARD/REVERSE SEARCH Press and hold the BACK or FWD SEARCH buttons during play to scan the disc at high speed. When the desired section of the disc is found, release the button. Normal play will resume. FWD..............FORWARD BACK............REVERSE Ê Ë If you press and hold the FWD button while playing, it will scan the current track forward at high speed. If you press and hold the BACK button while playing, it will scan the current track backward at high speed.
11 12 PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order (Up to 20 tracks can be programmed). Ê Press the EQ/PROGRAM button in stop mode, " " and track number " " and program number " " are shown in the display. Ë Ì Press the BACK or FWD SKIP/SEARCH button to select the first track to be programmed. Press the EQ/PROGRAM button. The first track number is now stored into memory, and the program number changes to " " waiting for your next selection.
13 14 REPEAT PLAY FUNCTION PLAYING AN MP3 DISC Thank-you for choosing the Sanyo CDP-M303, CD/MP3 player. Please take a moment to read this instruction booklet so you will become familiar with the many features of this unit. Note: Because an MP3 disc has a large capacity, the disc-reading time will be longer. Switch on the power, open the CD door, put the disc inside the unit correctly and close the CD door. Press PLAY/PAUSE, and READING appears on the screen.
15 16 ELECTRONIC EQ SETTING TRACK-SELECTING PLAYBACK Press FORWARD SKIP/SEARCH (or BACKWARD SKIP/SEARCH) to select the track you wish to play (refer to CD instructions for additional information.) During playback, press CD ALBUM/10+ to jump in increments of 10 within the current catalog. Then use the forward and backward skip/search to refine your selection.
18 17 INTRO SCAN MODE In stop mode or playing mode, press MODE fourth, " " flashes on the display. RECORDING FROM THE LINE OUT JACK Press PLAY/PAUSE again to begin playing brief introductions to the tracks. MP3 RANDOM PLAY In STOP or PLAY mode, press MODE five times, and " " flashes on the display. * The output from the CD player can be easily recorded. Connect a patch cable (not supplied) from the LINE OUT jack on the CD player to the LINE INPUT jacks on a cassette or other recorder.
19 SPECIFICATIONS Frequency Response System Laser diode Properties Error correction 20 Hz -20 kHz PICK-UP Compact disc digital audio system Material: GaAIAs Wavelength: =780nm Emission Duration: continuous Laser output: <44.6 W TROUBLE SHOOTING GUIDE SYMPTOM CD Player will not turn on. Disc will not play.
THE SANYO COMFORT WARRANTY AUDIO PRODUCTS WARRANTY APPLICATION New, unused Sanyo Audio products purchased through a Sanyo authorized dealer in Canada are warranted against manufacturing defects in materials and workmanship for ONE YEAR from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. of any MAINTENANCE necessary in respect of the product. SANYO CANADA INC.