Instruction Manual LCD Monitor CE52LH1R Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor.
GB SAFETY PRECAUTIONS GB CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the following basic rules for its installation, use and servicing. Installation and Use Do not allow anything to rest on the power cord.
SERVICING GB GB Servicing Your monitor is fully transistorised and does not contain any user serviceable components. You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts.
GB GB AC Power Cord Requirement The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you purchase it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet.
INSTALLATION GB GB Step : 1 Mains Connection n Connect the display unit to VGA, BNC and Scart connector as required. L R L R AV2-IN PJ-Net N5VW N5VW 1. Connect the in-line power connector to the connector attached to the LCD monitor as shown above. 2. Connect the power cord of the LCD monitor to a wall outlet. 0 As this product does not have a mains On/Off switch, please ensure your mains plug is easily accessible. 0 The LCD monitor is prepared for a mains voltage AC120V, 50Hz/ 60Hz.
REMOTE CONTROL GB Input Standby To switch input source from AV1, AV2, AV3, PCor DVI mode. To switch the monitor on and off. Also see page 7. GB Recall Wide To select the screen mode Full, Zoom, Zoom [Caption-IN], Normal, Natural wide,. Refer to page 11. To display input selection information and the Time set. You can also select colour systems in AV3 mode as follows: AUTO-> PAL -> SECAM -> NTSC -> NTSC4.43 It can also be automatically adjusted in PC mode by pressing this button for twice .
Timer AV 2 INSTALLATION GB Controls and Menus GB Menu Operation Many of your monitors functions are controlled through the menu function, using the remote control. MENU Picture Sound Timer Setup 1 2 1. The LCD display has a Standby light to show there is power. Switching into/from standby mode Video / S-Video The Standby mode is used for switching the LCD monitor off for short periods of time. In standby mode the monitor is switched off but is still receiving mains power.
60 MENU OPERATION GB n Advanced settings Picture menu Use the 5 or 6 button to select Advanced settings and press the 1 or 2 button to enter the sub menu as follows. DCDi(Directional Correlational Deinterlacing) is used to process moving angled edge in deinterlacing to get the smoothest and most natural image. Press the 1 or 2 button on the remote control to select On or Off.
MENU OPERATION GB n PIP/POP Setup Setup menu Use the 5 or 6 button to select PIP/POP Setup and press the 1 or 2 button to enter the sub menu. GB n AV2 Setting Use the 5 or 6 button to select AV2 Setting and press the 1 or 2 button to select YPbPr or RGBHV. Connect your PC to either PC-IN or RGBHV on the rear of the set. Once connected select PC mode or AV2 (RGBHV, see page 5 for AV2 input settings) via the INPUT button on your remote control. The set will become a monitor for the PC.
INSTALLATION MODE GB Installation Mode Installation Mode GB n DCR Select DCR usinig the 5 or 6 button, once highlighted you can select On or Off by pressing the 1 or 2 button. n Main S/W Version To record the version for Main Software. n Temperature Error This function can record times for abnormal temperature. n IP Address / Subnet / Gateway / DNS These 4 items display the PJ-Net information. If no PJ-NET had been connected, all the items would be displayed “000000000000”. 1.
OPERATION GB GB Selecting of picture size Select screen size among “Full”, “Zoom”, “Zoom(Caption-IN)”, “Normal” and “Natural wide” by pressing WIDE button on the Remote Control. n Full n Zoom Provides image to fit width of screen by expanding image width uniformly. This function can be used for enjoying a squeezed video signal with wide video aspect ratio of 16 : 9 screen. When your video equipment (such as DVD) has 16 : 9 output mode, select 16 : 9 and select “Full” to provide better quality.
OPERATION GB GB PIP/POP Operation Using this function, you can enjoy a DVI or Network program and an image (AV1, AV2, AV3 or PC input) at the same time. Press the ON/OFF button on the Remote Control repeatly to select PIP1, PIP2, POP or OFF mode. During the PIP/POP mode, press the Main/Sub Picture Swap button will switch the location for main and sub picture. 0 Only the sound on the main picture is heard from the monitor speaker. The sound on the sub-picture cannot be heard.
SPECIFICATIONS / HELPFUL HINTS GB GB Specification Common specification Power source Colour system 120V 50Hz / 60Hz PAL / NTSC / NTSC4.
GB PC/DVI-D / COMPONENT SIGNAL SUPPORT TIMING LIST GB Re Component signal suppo rt timing Resolution 720x480 720x576 720x480 720x576 1280x720 1280x720 1920x1080 1920x1080 1920x1080 Dot Clock Horizontal Vertical frequency frequenc y ( KHz) (Hz) Frequency(Mhz) 15.735 60i 12.27 15.625 50i 13.50 31.25 60p 27 31.25 50p 27 45.00 60p 74.25 1152_900 65.20 37.50 50p61.20 74.25 66.00 61.85 1152_900 33.75 60i 74.25 75.60 71.40 1152_900 28.13 50i 74.25 31.25 50i 74.
Part No. 1KA6P1P0391-- Printed in U.K.