Sanyo 8200 Phone Guide
Important Safety Information Read these guidelines. Breaking the rules may be dangerous or illegal. Violation of the instructions may cause serious injury or death. - Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode. - Never place your phone in a microwave oven as it will cause the battery to explode. - Do not dispose of your battery by fire or with hazardous or flammable materials.
Getting Started Front View of Your Phone 1. Earpiece Mar 01, 04 (Mon) 12:30pm 2. Main LCD R-Link Web 3. Softkey (left) 17. Softkey (right) 4. Navigation Key 16. Side Call Key 15. BACK 5. MENU/OK 14. Side Camera Key 6. Camera Key 13. END/POWER 7. TALK 12. SPEAKER Key 8. Microphone 11. Keypad 9. Accessories Connector 10. Charger Jack 23. Antenna 18. Speaker 24. Headset Jack 19. LED Indicator 25. Ready Link (Memo) Button 20. Sub LCD 21. Flash 22. Camera Lens 12:30p Mar 01 26.
Key Features 1. Earpiece: Lets you hear the caller's voice. 2. Main LCD (display): Displays the phone's main menu, features, modes, etc. 3. Softkey (left): Lets you select the menu corresponding to the bottom left line on the Main LCD. 4. Navigation Key: Lets you navigate quickly and easily through the menu options.You can access menu shortcuts by pressing Right: Contacts, Left : My Shortcut, Up: Messaging, and Down: Downloads. 5. MENU/OK: Lets you access the phone's menus and select menu options. 6.
18. Speaker: Lets you hear the different ringers and sounds.You can mute the ringer when receiving incoming calls by pressing or Side Camera key. 19. LED Indicator: Shows your phone's connection status at a glance. 20. Sub LCD: Lets you monitor the phone's status and see who's calling without opening the phone. 21. Flash: The built-in flash lets you take pictures in low light.You can also use it as a mini flashlight. 22. Camera Lens: The built-in camera lens lets you take pictures. 23.
Installing the Battery To install the LiIon battery: 1. Place the battery into the space beneath the antenna with the metal contacts at the bottom, facing downward. 2. Gently press down until it's in place and the battery release latch snaps. Turning Your Phone On and Off Turning Your Phone On To turn your phone on: • Press Turning Your Phone Off To turn your phone off: • Press and hold until you see the powering down animation on the display screen.
3. Press or 4. When you're finished, press to end the call. Answering Calls To answer an incoming call with the flip open: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. Press or to answer an incoming call. To answer an incoming call with the flip closed: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. When your phone rings or vibrates, press and hold the Side Call key ( ) on the right side of the phone.
Checking voicemail Your phone's 1 key has been programmed to dial your phone number. This will allow you one touch access to your voicemail. Alternatively, you can always dial your phone number from your mobile phone to access voicemail. To access you mobile phone's voicemail from a different phone, simply dial your phone number, wait for your voice greeting, then press the * key. You will then be prompted to enter your personal voicemail password. Sending a Message To send a text message: 1.
10. To set the message priority, select the box under Priority and press 11. Select Ordinary or Urgent and press 12. Press Send (left softkey) to send the message.
• Enable: Lets you make or receive Ready Link calls any time your phone is not in use. • Disable: Disables your phone's Ready Link service; you will not be able to make or receive Ready Link calls or access your Ready Link contacts. Preparing Your Phone for Ready Link Service The first time you use your Ready Link Phone, your phone must identify itself and make itself available to the Ready Link network. 1. When you activate Ready Link for the first time, you will be prompted to activate Ready Link service.
and Connecting... followed by “You have floor.” You can now begin speaking.) - or Highlight the contact you want to call and press and release to place the call. (The call will connect as described above, but “Floor is open.” will appear on the screen and either you or your contact may press and hold to take the floor and speak.) 4. Continue holding as you speak. When you are finished speaking, release the Ready Link (Memo) button to allow other contacts to speak.
Receiving a Ready Link Call (1-to-1 Call) 1. Make sure your phone's Ready Link mode is enabled 2. When you receive a Ready Link call from a contact, “R-Link Call,” the contact's name, and the Ready Link number appear on the display. (You do not need to take any action to answer the call.) 3. If the person placing the call has kept the floor (held the Ready Link Memo] button), you will see the contact name and Ready Link number along with “has floor.”, and you will hear the caller speaking. 4.
3. Select In Camera and press 4. Press to select a picture. (The check box on the lower right corner will be marked.You can select multiple pictures.) If there is no selected picture, the currently highlighted picture will be selected. 5. Press Send (left softkey). 6. Select an option from the following and press • From Phone Book to select a recipient from your Contacts list. Highlight a recipient and press to select. • Mobile Phone# to enter a mobile phone number directly.
The Wireless Web Launching the browser You must be a subscriber to these services in order to use them. To Launch a web connection: 1. Press the Main Menu or OK button. 2. Press the number 4 button for the Web. 3. Your connected to the Mobile Web Home page. -or1. Press the right softkey 2. Your connected to the Mobile Web Home page. To use softkeys: • Press the desired softkey button.
