CLT-2419-2423E-NEW 3/14/03 3:32 PM 2.4 GHz Cordless Telephone with Caller ID Instruction Manual Page 1 CLT-2419 CLT-2423 Important Charge the handset battery for 12 continuous hours prior to first use. SANYO Canada Inc. www.sanyocanada.
CLT-2419-2423E-NEW 3/14/03 TABLE OF CONTENTS 3:32 PM Page 2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 TABLE OF CONTENTS Caller ID with Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Caller ID list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Reviewing Caller ID list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Storing Caller ID entries in the directory . . . . . . . . . . . . .
CLT-2419-2423E-NEW 3/14/03 INTRODUCTION 3:32 PM Page 4 Congratulations on your purchase of this Sanyo cordless telephone. Your Sanyo 2.4 GHz cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronics equipment. With proper maintenance and care, it will provide you with years of enjoyment and convenience. Main Features 2.4 GHz Technology Superior Range -The use of 2.
CLT-2419-2423E-NEW 3/14/03 GETTING STARTED 3:32 PM Page 6 Battery setup 1. Remove the battery compartment cover on the handset, insert the battery, plug the cord into the jack (inside the compartment) and replace the cover. 2. Set the handset RINGER switch to ON, and place handset in the base. 3. Plug the AC adpator into the POWER DC 12V jack on the back of base and the other end into an electrical outlet. The CHARGE/PAGE indicator comes on verifying the battery is charging.
CLT-2419-2423E-NEW 3/14/03 Page 8 Earpiece 3:32 PM NAMES AND CONTROLS Handset VOLUME keys CID ▲ or ▼ key TALK/CALL BACK key (also used to END a call) RINGER switch REDIAL/DEL (delete) key TONE key CHAN (channel) key MUTE key Charging contacts 8 Incoming call visual alert LED LCD screen 7-10-11/HOLD key CANCEL key INT (intercom) key PAUSE key FLASH/PROG (program) key MEM (Memory) key Microphone TONE key REDIAL/DEL (delete) key NAMES AND CONTROLS Base unit PAGE/INTERCOM key Speaker Volu
CLT-2419-2423E-NEW 3/14/03 3:32 PM INITIAL PROGRAMMING Page 10 Before using this telephone 6 initial settings must be completed on the base: Language, Screen contrast, Area code (This is required to use Caller ID service from your telephone company), Ringer tone and Time. Note: The Language selection and Ringer tone setting must be done separately for the handset and for the base. Language setting Make sure the phone is OFF (not in TALK mode). Press FLASH/PROGRAM on the base.
CLT-2419-2423E-NEW 3/14/03 3:32 PM INITIAL PROGRAMMING Page 12 Make sure the phone is OFF. Press FLASH/PROGRAM on the base six times. D E F A U L T S E T T I N G 1 Y E S 2 N O shows on screen. Press CID ▲ or ▼, or the 1 or 2 key to select your choice. Press FLASH/PROGRAM to confirm.
CLT-2419-2423E-NEW BASICS 3/14/03 3:32 PM Telephone number Volume level Page 14 Press SPEAKER again to hang up. Call timer Press SPEAKER. Dial the phone number. The screen shows: Using base speakerphone: 1. 2. 3. Volume adjustment The VOLUME keys on the handset adjusts the volume level of the handset’s earpiece. The VOLUME keys on the base controls the base speaker. There are four levels. Make sure the speakerphone is ON (SPEAKER key is lit). Press VOLUME ▲ or ▼, on the base.
CLT-2419-2423E-NEW BASICS 3/14/03 3:32 PM Page 16 Pre-dialing 1. Make sure the phone is OFF (not in TALK mode). 2. Enter the telephone number. The telephone number shows on screen. 3. Press TALK/CALL BACK on the handset or press SPEAKER or CALL BACK on the base. The telephone number shows on the respective screen. Note: You may enter up to 32 pre-dial digits. • 1. 2.
CLT-2419-2423E-NEW BASICS 3/14/03 3:32 PM Page 18 Using the intercom while you are on a call You may want to use the intercom feature while you are on a call. Press INT on the handset. The line is put on hold, and you will hear a paging tone at the base and handset. Press PAGE/INTERCOM on the base and I N T E R C O M shows in the handset screen. Press INT on the handset to return to TALK mode. From the handset (in TALK mode): 1. 2. 3. From the base (in speakerphone mode): 1. 2. 3.
CLT-2419-2423E-NEW BASICS 3/14/03 3:32 PM Page 20 Tip: Do not use TALK/CALL BACK (or SPEAKER on base) to activate custom calling services such as Call Waiting, or you will hang up the phone. CHAN (Channel) key While talking, you might need to manually change the channel in order to get rid of static. Press and release the CHAN key on the handset to switch to the next clear channel. HOLD key Press HOLD on the handset or base to put a call on hold.
CLT-2419-2423E-NEW 3/14/03 CALLER ID FEATURES 3:32 PM Page 22 This phone receives and displays incoming call information transmitted by your local phone company. This information can include the phone number and/or the name, date and time. The phone can store up to 40 calls for later review. Press the FLASH/PROGRAM key to put the current call on hold so that you can answer the incoming call.
CLT-2419-2423E-NEW 3/14/03 CALLER ID FEATURES 3:32 PM Page 24 Dialing a Caller ID number 1. Make sure the phone is OFF (not in TALK mode). 2. Use CID ▲ or ▼, to scroll to the desired Caller ID entry. 3. Use the 7-10-11 key to show the phone number in proper digits if necessary. 4. Press the TALK/CALL BACK on the handset or CALL BACK on the base. The number dials automatically. Deleting entries from the Caller ID list Use REDIAL/DEL to erase the entry currently shown on screen or all entries.
CLT-2419-2423E-NEW DIRECTORY 3/14/03 3:32 PM Page 26 Inserting a pause in the dialing sequence Press PAUSE twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence. P shows on screen. Note: Make sure to press PAUSE twice to enter a pause.
CLT-2419-2423E-NEW 3/14/03 3:32 PM CHANGING THE BATTERY Page 28 Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. For a replacement battery, please contact your place of purchase or fill out and mail the enclosed Battery Order form. Caution: • Use only the specified battery type (3.6 V, 600 mAh). • Do not remove the battery from the handset to charge it.
CLT-2419-2423E-NEW 3/14/03 3:32 PM LCD SCREEN MESSAGES Page 30 The following indicators show the status of a message or of the phone. ERROR Caller information has been interrupted during transmission or the phone is excessively noisy. Prompt telling you to enter name in directory. ENTER NAME Prompt asking you if you want to erase all Caller ID entries. DELETE ALL? DELETE? Prompt asking you if you want to erase the current Caller ID entry or a directory entry that is shown on the screen.
CLT-2419-2423E-NEW 3/14/03 TROUBLESHOOTING 3:32 PM Page 32 • Is the battery pack installed correctly? • Did the handset beep when you pressed TALK/CALL BACK? Did the VOICEMAIL/IN USE indicator come on? The battery may need to be charged. Dial tone is OK, but cannot dial out • Make sure the TONE/PULSE switch on the back of the base unit is set to TONE or PULSE according to your phone service. Handset does not ring • Make sure the RINGER switch on the handset is turned to ON.
CLT-2419-2423E-NEW 3/14/03 3:32 PM Page 34 MAXIMIZE BATTERY PERFORMANCE The freedom that your cordless telephone can offer is fully dependent on the performance of the rechargeable battery in the handset. To maximize the battery performance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charge it for 12 hours continuously. The proper initial charging is very important to maximize the battery performance.
CLT-2419-2423E-NEW 3/14/03 3:32 PM TECHNICAL INFORMATION In some cases, the company’s inside wiring associated with single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier.
CLT-2419-2423E-NEW 3/14/03 SOS HELP LINE 3:32 PM Page 38 At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of Sanyo telephone products.