INSTRUCTION MANUAL Colour Television CE27LD4-B CE27LD4BK-B CE32LD4-B CE32LD4BK-B Please read this Instruction book before using your television. We wish you many hours of pleasure from your new television.
END-USER LICENCE & SERVICING End-User Licence The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utilities and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User Licence Conditions detailed below.
SAFETY PRECAUTIONS CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing. Installation Use Do not allow anything to rest on the power cord.
SAFETY PRECAUTIONS Important: This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows: 1. Remove the fuse cover and fuse. 2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type. 3. Ensure that the fuse cover is correctly refitted. If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
INSTALLATION Step : 1 Connections ( Essential) Step : 2 Remote control battery installation 1. Connect your aerial cable socket to the back of the TV set. Fit the aerial cable as shown or as shown below when AV equipment is connected. ● Connecting DVD / VCR player/ Satellite receiver or Set top box. We recommend that you connect all other equipment before Plug and Play. The following examples are our recommended standard connection. LCD TV L/S R/D Install two "AAA" 1.
INSTALLATION Terminals Step : 3 Switching on / Plug & Play The LCD TV will have a red Standby light to show there is power. Press the standby button to start Plug and Play. P The self-automatic tuning system called Plug and Play will start. The TV scans the analogue channels first and then switches to digital channel mode and scans digital channels. This could take up to 15 minutes. During automatic tuning, the TV displays the tuning status of analogue and digital channel tuning on the screen.
REMOTE CONTROL - Digital Use Sound mute To switch the sound from the speakers. The sound changes as follows; Normal volume -> Half volume -> Mute Screen mode selector To select the screen mode, AUTO, NATURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL. Standby/Power on/off To switch the TV on and off. Also see page 19. D/A selector Digital Shot button Press to capture up to 12 pictures and view using the CS button. To switch between analogue and digital channels.
DIGITAL OPERATION User Lists Main menu The main menu screen takes you to many functions in the TV. The buttons below are the main buttons and their uses. MENU button - Enters and exits menus. Button e and d moves up and down in each selected menu. Main Menu Picture Sound User lists Parental lock Configuration Channel list Technical information Timer recording Off Timer TV settings ■ Setting User Lists 1. Press the MENU button to select main menu. 2. Select User Lists by pressing the d button. 3.
DIGITAL OPERATION ■ Remove a channel. 5. Select New code by pressing the d button, and enter your new code eg. 4 3 2 1. 1. Highlight a channel to be removed. 2. Press the Red button and it will be deleted, the screen shows a red line through it. To deselect a deleted channel press the Red button again. ✐ Red button refers to coloured buttons Red, Green, Yellow and Blue. Do not get confused with larger Red Standby button. 3.
DIGITAL OPERATION Parental lock Language choice Audio: First language Second language ● How to watch a locked channel. 1. Select a locked channel, Parental lock display appears. OK Save 1 BBC ONE All Channels 2. Press the OK button, enter the Parental code and press the OK button again. ? Enter parental code OK Save RET Cancel 3. The channel is temporarily unlocked until the channel is changed. 4. Press the MENU button to return to normal TV picture.
DIGITAL OPERATION Technical Information Channel List ● Edit channel list 1. Press the Menu button to select Main Menu. 2. Select Channel List by using the e or d button. Press the 8 to enter. Lock channels Scan for channels Technical information 3. Select Lock channels by using the e or d button. Press the 8 button to enter. Lock channels Signal information Software upgrade Product data Reset All channels 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Y 1. Press the Menu button to select Main Menu. 2.
DIGITAL OPERATION Timer recording - This feature is used when you wish to record a digital channel on your VCR. - In order to record digital channels you cannot watch another digital channel when recording. Digital channels are recorded using AV2. - Timer recording will switch your TV set to the digital channel at the preset time until the finish time is reached. - Whilst timer recording is running you can switch to Analogue TV.
DIGITAL OPERATION Setting menu Info button ■ Child lock You can prevent small children from operating the TV with the side buttons on the TV set. When you press the info button in digital mode you will be displayed a cut down guide showing only the channel you are currently on. Wed 11:44 20/0802003 ITV 1 1. Press the MENU button and select Main Menu. 2. Press the d button and select Setting menu. Press the 8 button to enter. 3.
REMOTE CONTROL - Analogue Screen mode selector Sound mute To select the screen mode, Auto, Natural, Zoom14:9, Title In 14:9, Zoom 16:9, Title In 16:9, Full or Normal. To switch the sound from the speakers. The sound changes as follows; Normal volume -> Half volume -> Mute Standby / Power on/off Digital Shot button To switch the TV on and off. Also see page 16. Press to capture up to 12 pictures and view using CS button. DS D/A selector To switch between analogue and digital channels.
MENU OPERATION - Analogue channels Many of your TV’s functions are controlled through the menu function. Sound menu MENU Picture Sound Volume Bass Treble Balance BBE Timer OFF Timer Alarm Timer Setting Child lock AV2 Noise Reduction Preset Press the MENU button and select Sound menu by pressing the 7 or 8 button. Brightness Contrast Colour Sharpness Tint (only if NTSC equipment is detected) Text brightness Memory Auto Tuning Auto sort Prog.
MENU OPERATION Setting menu After completing this procedure, the TV set returns to programme position “01”. Position changes sequentially as channels are found. Setting Child lock Noise Reduction AV2 On / Off Min / Med / Max / OFF Video / S-Video To cancel this tuning operation, press the MENU button repeatedly. ✐ You can change the order of the station selection, by using the channel swapping function detailed later. ■ Auto Sort ■ Child lock 1. Press the MENU button.
MENU OPERATION Preset menu 4. Press the OK button to store, the number disappears. 5. Press the MENU button to exit and they are swapped. ■ Fine tuning 1. Press the MENU button and select Preset using 7 or 8 buttons. 2. Press the e or d button and select Fine tuning. 3. Press and hold the 7 or 8 button to fine tune channels. The tuning will be stored when you exit the menu. Press the MENU button to exit.
TELETEXT OPERATION - Analogue channels DS Direct access to a page All the numeric buttons can be used to select a page number directly. If you need page 301, press 3 then 0 then 1. Sub page access Some text pages are made up of several sub pages which rotate automatically if you wish to view P4 of 8 press the sub page button. “----” will appear. Enter 0004. Standby/Power on/off To switch the TV on and off.
ANALOGUE AND DIGITAL OPERATION ■ Switching into / from standby mode The Standby mode is used for switching the TV set off for short periods of time. In standby mode the TV is switched off but is still receiving mains power. ● To turn the TV set into standby mode, press the 4 button. The red power indicator illuminates more brightly. ● To turn the TV set ON from standby mode, press any of the following buttons: 4, 5, 6 or 0-9 buttons.
OPERATION Selecting of picture size ■ Zoom 16:9 ■ Screen options 4:3 14:9 16:9 Letterbox Video Today there are various transmission formats with different size ratios, eg. 4:3 , 14:9, 16:9 and video formats such as letterbox. ■ Auto It automatically switches to the optimum screen mode according to the WSS signal provided in the receiving signal source. If the signal does not have it, the TV keeps current screen mode. The correct picture width is maintained but the top and bottom are cropped.
SPECIFICATION / HELPFUL HINTS The following faults are not caused by the receiver: Specification Common specification Power source Television system Colour system AC 220~240V 50Hz System I PAL (PAL/NTSC3.58 in AV mode) Channel coverage UHF: 21-69, Aerial input impedance 75 ohm "INTERFERENCE" Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer.
WARRANTY T O CUST OMER SANYO Europe Ltd.
Part No. 1KA6P1P0194-B 24 N2WK/WKA N2YK/YKA Printed in U.K.