INSTRUCTION MANUAL DVD Home Theater System REMOTE CONTROLLER RB-TS760ST DC-TS760
PRECAUTIONS CAUTION THIS PRODUCT CONTAINS A LOW POWER LASER DEVICE, TO ENSURE CONTINUED SAFETY DO NOT REMOVE ANY COVERS OR ATTEMPT TO GAIN ACCESS TO THE INSIDE OF THE PRODUCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. - - - - 1 The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Do not use where there are extremes of temperature (below 5°C or exceeding 35°C) or where direct sunlight may strike it.
CONTROLS Front panel 1 2 3 4 5 6 7 11 1. 2. 3. 4. 5. 6. Disc tray Open/Close button (q) Function button (FUNCTION) Preset tuning, Skip/Next/Previous buttons (f – PRESET + e) Display Stop button (n) 7. 8. 9. 10. 11. 10 8 9 Play button (a) Power button (z/ON) Headphones socket (PHONES) Volume control (VOLUME) Remote sensor (IR) Display 3 5 7 1 2 4 6 8 19 18 9 D L.M. MP3 T PL WMA PGM ALL REP.1A-B C L R RND SLEEP RDS MONO ST 17 16 15 14 1. 2. 3. 4. 5. 6. 7. 8. 9.
3
BASIC CONNECTIONS After all connections have been made, connect the mains lead to an AC outlet . Note: - Do not connect the mains lead to an AC outlet until all connections have been made. - The system is not completely disconnected from the mains when the z/ON button is set to the z position. Speaker connections To achieve proper stereo reproduction, connect the speaker wires without shorting to adjacent wires as shown in figure.
Speaker placement Front right speaker Centre speaker Front left speaker Surround right speaker The supplied speakers have built-in magnetic stray field compensation. They may be placed close to a TV without affecting the colour purity. The five speakers are all the same and can be used for front left, centre, front right, surround left and surround right speakers.
Aerial connections Connecting to a TV with the video lead Connect the video lead between the MONITOR OUT VIDEO socket of the unit and the video input socket of the TV. TV AUDIO VIDEO INPUT 1 R-AUDIO-L VIDEO Notes on connections - Please refer to the instruction manuals for the components that you are connecting (TV, VCR, etc.).
ADDITIONAL CONNECTIONS EXAMPLES Connecting to a TV with an EURO-AV/SCART lead Please follow the steps below before turning on the power. 1. If your TV has an EURO-AV/SCART socket, connect the unit as shown. (Do not connect the video lead to the MONITOR OUT VIDEO socket.) You can enjoy high quality picture playback. 2. Set the VIDEO OUT SELECT switch to RGB.
SYSTEM CONNECTIONS EXAMPLES JCX-TS760, TV and Audio equipment TV EURO-AV/SCART (RGB input facility) Aerial AERIAL IN Aerial lead (not supplied) EURO-AV/SCART lead (not supplied) Audio equipment (such as MD deck etc.
AERIAL IN AUDIO OUT L R OUT IN AV AERIAL IN/OUT AV 9 OUT AUDIO OUT IN L AERIAL R OUT
This instruction manual explains the various functions of this unit using the remote control. The buttons on the main unit perform similar functions to similarly marked buttons on the remote control. BEFORE OPERATION Turning the power on and off Selecting the sound mode Press the z/ON button. “HELLO” appears briefly on the display. (After connecting the mains lead, when you press the z/ON button for the first time, the volume-reset feature automatically sets the initial volume level.
VARIOUS ADJUSTING Selecting surround mode Adjusting the speaker volume balance Press the SURROUND button to select the surround mode. Each time the button is pressed, the surround mode changes as follows: AUTO v QS 5.1 ST v QS 5.1 MN v 2.1ch . . . This unit is set to the standard level before shipping from the factory. You may not need adjustment. But, depending on the size of the room and the placement of the speakers, you may need a fine adjustment. In this case, follow the steps below.
PLAYABLE DISCS The following types of discs can be played on this unit. Disc type and logo mark DVD Video Audio CD Region number Region number (Regional restriction code) is built-in to the unit and DVD discs. There is a region number on the rear of the unit. The same region number or region number “ALL” of DVD discs can be used on this unit. Note: - Only the above types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, etc. cannot be played. - This unit can play back the Video CD (VCD).
DISC PLAY Important note: - This “DISC PLAY” explains the basic instruction of the DVD player section. - Some DVD or VCD discs have different functions that may not be explained in this instruction manual. You may need extra instructions. In this case, please follow the instructions displayed on the TV screen or jacket or case of the disc. ” may appear on the TV screen during operation. This icon means that the function is not available on the disc now.
VARIOUS DISC PLAYING FUNCTIONS “ ” may appear on the TV screen during operation. This icon means that the function is not available on the disc now. Selecting a DVD menu [DVD] Track search [VCD] [CD] 1. Press the MENU button. The main menu screen appears. Note: Press the MENU button again to resume play. 2. Press the 4, 5, b or a button (or the number buttons) to select the desired menu, then press the ENTER button. The selected menu play starts.
Picture zoom (Pin point zoom) [DVD] Repeat play Press the REPEAT button during play of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode changes as follows. 1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play. The pin point guide screen appears. - If you quit the screen, press the SHIFT + 3 ZOOM buttons. 2. Press the 4, a, 5 or b button, then the ENTER, or press the number button to select the zoom point. The screen is magnified.
Programmed play [VCD] [CD] Up to 20 selections can be programmed. Programming procedure 1. Press the PROGRAM/RANDOM button once (VCD) or twice (CD) in the stop mode. The programme mode screen appears and “PGM” blinks on the display. 2. Press the number buttons to select the track number. Example: To select track No.3, press 0, then 3. To select track No.10, press 1, then 0. To select track No.24, press 2, then 4. - If you make a mistake, press the CLEAR button. 3.
Selecting on-screen information Press the ON SCREEN button repeatedly to show the disc information (Title, Chapter, Title elapsed playing time, Language, etc.). Example for VCD: 1. Press the ON SCREEN button during play. Track elapsed playing time Example for DVD: 1. Press the ON SCREEN button during play. Chapter remaining playing time Title elapsed playing time 02:29 2. Press the ON SCREEN button again. Track elapsed playing time 00:08:20 00:01:45 2. Press the ON SCREEN button again.
MP3/WMA CD OPERATION Before starting MP3/WMA CD play This unit can play back the CD that has recorded music data, MP3 or WMA (Windows Media Audio) files. - The file system is ISO9660 level 1 and level 2. - If the CD has both audio CD tracks and MP3/WMA files, only audio CD tracks are played. - It would take 30 seconds or more for this unit to read MP3/WMA files depending on its structure. - This unit can recognize up to 256 files or folders per disc.
PICTURE CD OPERATION You can view digital images from KODAK Picture/JPEG files. - The file system is ISO9660 level 1 and level 2. - If the CD has both audio CD tracks and JPEG files, only audio CD tracks are played. - It would take 30 seconds or more for this unit to read JPEG files depending on its structure. - This unit can recognize up to 256 files or folders per disc. The CD with 257 files or folders and over is not available to this unit. - JPEG CDs may not be played in the recorded order.
INITIAL SETTINGS FOR DVD Once the initial settings have been completed, the unit can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even if the power is turned off. Setting display 1. Press the SETUP button in the stop mode. The setup screen appears. Language Display Audio Parental Setting language 1. Press the SETUP button in the stop mode. The setup screen appears and “Language” is highlighted. Language Display Audio Parental 2.
Setting audio Setting parental The sound from speakers can reach the listening position at different times depending on the speaker placements. You can allow for this difference by changing the delay time of the centre and surround speakers. You also can change the dynamic range control (DRC). 1. Press the SETUP button in the stop mode. The setup screen appears. 1. Press the SETUP button in the stop mode. The setup screen appears. Language Display Audio Parental 2.
LANGUAGE CODE LIST Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and “DVD Menu”.
LISTENING TO THE RADIO To turn the unit on and listen to the last received station, press the TUNE/BAND button. Automatic/Manual tuning 1. Press the TUNE/BAND button to select FM or AM. 2. Automatic tuning Press the TUNE/PTY “+” or “–” button for at least 1 second to tune in a station. The unit will scan up or down the band and receive the next receivable station. Press the button again to continue. Manual tuning Press the TUNE/PTY “+” or “–” button briefly until the desired frequency is displayed.
To search a preset station by PTY codes A particular programme type broadcast can be located by specifying the PTY codes. 1. Press the RDS button to select “PTY” while listening to an FM broadcast. 2. Press the TUNE/PTY “+” or “–” button within 2 seconds to select the desired PTY code. The PTY code changes as shown below; 3. Press the PTY CHK (e) button within 10 seconds.
TROUBLESHOOTING GUIDE If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem. SYMPTOM No picture. No sound. POSSIBLE CAUSE CORRECTIVE ACTION The wrong function is selected. Select the correct function. No disc is loaded or an unplayable disc is loaded. Load a disc or load a playable disc.
SPECIFICATIONS Amplifier Tuner Main amplifier Stereo mode 33 W x 2 (at 8 ohms, 10% distortion) Dolby Digital mode 33 W x 2 (at 8 ohms, 10% distortion, with Centre/Surround/ Subwoofer amplifier off) Centre amplifier 33 W (at 8 ohms, 10% distortion, with Main/Surround/Subwoofer amplifier off) Surround amplifier 33 W x 2 (at 8 ohms, 10% distortion, with Main/Centre/Subwoofer amplifier off) Subwoofer amplifier 55 W (at 4 ohms, 10% distortion, with Main/Centre/Surround amplifier off) Reception frequency: FM:
GUARANTEE TO CUSTOMER Sanyo Europe Ltd. (the Company) guarantees to the initial retail purchaser that if this equipment is or becomes defective and that, in the opinion of the Company, the defect is due to faulty material or workmanship the Company will, for a period of 12 calendar months from the date of sale to the original purchaser repair or replace, at its sole option, free of charge, any such defective component part of the equipment, always provided that: 1.
