Operation Manual

CONNECTING A VIDEO GAME OR OTHER
EQUIPMENT
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)

Connect game Audio Output (R/L) to the TV Audio
Input (R/L). Then connect game Video Output to the TV
Video Input.
 Press POWER to turn on the TV. Turn on external
equipment also.

To access Audio/Video inputs, press the INPUT key to
select GAME or select using the menu.
MENUL - AUDIO - RVIDEO IN CH VOL POWER
L - AUDIO - RVIDEO IN
Camcorder
Video Game
What you will need for
connections:

Audio/Video Cable – 1
USING THE FRONT VIDEO AND AUDIO INPUT JACKS
 A solid Blue screen with the word VIDEO1 displayed,
means that the Video mode is selected, but no signal is
being detected at the Video jacks. Check connections,
turn on external equipment.

Press INPUT key after connecting cables to access
the A/V inputs.There is NO need to tune to a blank
channel.

7
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
USING THE AUDIO OUTPUT JACKS
AUDIO VIDEO INPUT
COMP
Pr
Pb
Y
AV2
VIDEO
(MONO)
AUDIO
OUTPUT
R
L

Back of TV
CONNECTING AUDIO OUT JACKS TO A
STEREO AMPLIFIER
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)

Connect the TV Audio Out (R/L) to the Stereo Amplifier
In (R/L).
Press POWER to turn on the TV. Turn on external
equipment also.
Note: DO NOT connect external speakers directly to
the TV.
What you will need for
connections:

Audio Cable – 1
 Position your TV at least 2 feet from stereo speakers.
The magnets in the speakers may affect the picture
quality.
Stereo Amplifier
1 2 3
RESETINPUT
POWER
123

Remote Control

Model DS27425