DVR User Manual

Names of each part and connections

Remote systems such as system controllers and PTZ dome cameras are connected to the RS-485 control terminal.

Check the manufacturer of the units to be connected and connect the units to the appropriate terminal signals (A/B).

This unit can be operated through the controller.

Memo: • The setting of the RS-485 screen on the system

setting is necessary when a system controller is

connected. (P40)

• Refer to the System controller’s instruction manual

for more information about the operation method.

If a PTZ dome camera equipped with a RS-485 control

terminal is connected, the camera can be directly operated

through this unit.

Memo: The settings on the PTZ CONTROL screen and

RS-485 SET screen in the system setting are

necessary when a camera is connected. (P14, 40)

• Connection to the RS-485 control terminal is

unnecessary for coaxial superimposed type

(COAX) cameras. Select a protocol for COAX in the

PTZ CONTROL settings. (P14)

Connecting to the RS-485 control terminal

1234

RS-485/422

1 A (SANYO SSP)

To connect a Sanyo PTZ dome camera or

system (SANYO SSP) controller

2 B (SANYO SSP)

3 A (EXCEPT SANYO)

To connect a third-party camera

4 B (EXCEPT SANYO)

If a system controller is connected

System controller

If a camera is connected

L8HBT_WA(DSR-2116_2108)(GB).book 6 ページ２００９年５月２７日　水曜日　午後４時５０分