User Guide

35
RECORD settings
Press the MENU button and enter the password.
The MAIN MENU is displayed, select "RECORD" using the
control button ({|}~).
To set the resolution for the recordings.
Select "RESOLUTION" using the control button ({|)
and select a setting using the control button (}~).
To set the recording settings of each channel.
Select an item for each setting using the control button
({|) and select a setting value using the control button
(}~).
● Setting a CHANNEL
Select "CHANNEL" and select a channel.
CH1 - CH16
☞ In DSR-2108, CH1 - CH8.
● Setting the FRAME RATE (Unit: ips)
Select "FRAME RATE" and select a value.
NTSC: OFF/1/2/ ... 29/30 (ips)
PAL: OFF/1/2/ ... 24/25 (ips)
● Setting the QUALITY
To select "QUALITY" and select the video quality.
Selections: NETWORK/ECONOMY/BASIC/NORMAL/FINE
● Setting the RECORDING
To select "RECORDING" and select the recording mode.
• CONTINUOUS (P17)
Recording is performed while this unit is turned on.
• MOTION recording (P17)
Recording is performed as soon as the internal motion
sensor of this unit reacts.
A
Setting the RESOLUTION
FULL: NTSC: 704 × 480, PAL: 704 × 576
HALF: NTSC: 704 × 240, PAL: 704 × 288
QUAD: NTSC: 352 × 240, PAL: 352 × 288
MAIN MENU
RECORDLIVE SYSTEM
HDD SETNETWORK SERVICE
RECORD
RESOLUTION FULL
CHANNEL C
FRAME RATE 1 ips
QUALITY NORMAL
RECORDING CONTINUOUS
MOTION ZONE FULL ZONE
MOTION SENSITIVITY 9
ALARM RECORDING -- -- -- --
PRE RECORD OFF
POST EVENT RECORD 5 SECONDS
AUDIO OFF
TIMER SET
REAL-TIME REC SET
11
B
Setting a CHANNEL
• Depending on the RESOLUTION settings, the
total FRAME RATE available is limited as
follows. If the total exceeds the limit the FRAME
RATE of other channels cannot be set.
If FULL is selected under resolution setting:
NTSC: It is possible to select up to a total of 30 frames for
channels 1 to 8 and up to a total of 30 frames for
channels 9 to 16
PAL: It is possible to select up to a total of 25 frames for
channels 1 to 8 and up to a total of 25 frames for
channels 9 to 16
☞ In DSR-2108, it is possible to select up to 30 (NTSC)/
25 (PAL) frames.
If HALF is selected under resolution setting:
NTSC: It is possible to select up to a total of 60 frames for
channels 1 to 8 and up to a total of 60 frames for
channels 9 to 16
PAL: It is possible to select up to a total of 50 frames for
channels 1 to 8 and up to a total of 50 frames for
channels 9 to 16
☞ In DSR-2108, it is possible to select up to 60 (NTSC)/
50 (PAL) frames.
If QUAD is selected under resolution setting:
NTSC: It is possible to select up to a total of 120 frames for
channels 1 to 8 and up to a total of 120 frames for
channels 9 to 16
PAL: It is possible to select up to a total of 100 frames for
channels 1 to 8 and up to a total of 100 frames for
channels 9 to 16
☞ In DSR-2108, it is possible to select up to 120 (NTSC)/
100 (PAL) frames.
• Calculation of the total FRAME RATE is
performed using the FRAME RATE set in the
RECORD menu or the FRAME RATE set in the
REAL-TIME REC SET menu, whichever is
greater.
L8HBT_WA(DSR-2116_2108)(GB).book 35 ページ ２００９年５月２７日 水曜日 午後４時５０分