Digital Video Recorder Manual for Remote Operation by Network Connection DSR-3016, DSR-3009

English
11
Menu Setting Procedures
This sets the overwrite conditions and remaining disk capacity warning criteria for each recording area.
NORMAL RECORDING AREA OVERWRITE (Default setting: ON)
This specifies whether to stop recording or to continue
recording by overwriting images that are currently
recorded on the hard disk when the normal recording
area has become full.
1
Select [ON/OFF] from the menu.
• ON: When the normal recording area becomes full,
images will begin to be overwritten automatically
from the start of the normal recording area.
• OFF: Recording will stop when the normal recording area
becomes full.
ALARM RECORDING AREA OVERWRITE (Default setting: ON)
This specifies whether to stop recording or to continue
recording by overwriting images that are currently
recorded on the hard disk when the alarm recording
area has become full.
1
Select [ON/OFF] from the menu.
• ON: When the alarm recording area becomes full,
images will begin to be overwritten automatically
from the start of the alarm recording area.
• OFF: Recording will stop when the alarm recording area
becomes full.
REMAINING DISK WARNING
The buzzer can be set to sound a warning if the
NORMAL RECORDING AREA OVERWRITE and ALARM
RECORDING AREA OVERWRITE settings are “ OFF”
and the remaining disk capacity becomes low (see p.
25). The remaining disk area value at which a warning
will be given can be specified here.
1
Set the remaining disk area value from the menu.
Setting range: 1% to 10% (1% units)
Click [SAVE] to complete the sub-menu settings (or changes).
5. RECORDING CONDITIONS SET
If the OVERWRITE setting is “ ON” for both
recording areas, no remaining area warning is
necessary, and so “ **” is displayed and REMAINING
DISK WARNING cannot be set.
DSR3016gb.fm 11 ページ ２００２年７月４日 木曜日 午後４時４１分