Digital Video Recorder Manual for Remote Operation by Network Connection DSR-3016, DSR-3009

English

Menu Setting Procedures

The duration of alarm recording can be set separately for each camera. The DURATION setting for each

camera that is made using the [ALARM DURATION SET] menu is effective when [DURATION] in the

[ALARM RECORDING] menu is set to “INDIV.” (See p. 16)

Select the alarm recording duration for each

camera from the menu.

5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN, 2 MIN, 3 MIN,

4 MIN, 5 MIN, 10 MIN, 15 MIN, CC

(Default setting: 5 SEC)

Click [SAVE] to set (or change) the alarm recording

durations for each camera.

Screen example for DSR-3009 model

Screen example for DSR-3016 model

This specifies the information to be displayed on the monitor by selecting “ON” or “OFF” in the menu.

DATE (Default setting: ON)

Current date or recording date

TIME (Default setting: ON)

Current time or recording time

QUALITY (Default setting: ON)

Quality of images being recorded or played back

REC RATE (Default setting: OFF)

Recording rate for images being recorded or played

back

ALARM COUNT (Default setting: ON)

Cumulative number of alarms

The maximum count that can be displayed is 9999. If the count

exceeds this number, it will be reset to 0.

ALARM TYPE (Default setting: ON)

Type of alarm recording

For alarm recording: “ALARM” is displayed.

For pre-alarm recording: “PRE” is displayed.

Click [SAVE] to complete the DISPLAY SET menu settings (or changes) that are displayed on the screen.

10. ALARM DURATION SET

11. DISPLAY SET

Because this setting specifies the information to be displayed on the monitor that is connected to the main unit, it will

have no effect on the computer screen.

DSR3016gb.fm 18 ページ２００２年７月４日　木曜日　午後４時４２分