Manualshelf

DVR User Manual

ManualsBrandsSanyo ManualsDVRDSR-3716
81828384858687888990
How to set 82
English
Menu copy
Save the set menu on the CF card and load the same menu
onto a different DVR of the same model. It is possible to
control several units using the same menu.
1 DVR version number
2 To be selected when saving to be selected when saving
the basic menu content to the CompactFlash (CF) card.
3 To be selected when the basic menu content saved to the
CF card is loaded onto other DVRs of the same model.
4 Selecting the area distribution of the recording area
Select the below item before performing "LOAD MENUS
FROM CF" in 3.
Selections:
NO: Load the menu content from the CF card without altering
the area distribution of the hard disk recording area
(normal, alarm, archive).
YES: Alter the area distribution of the hard disk recording area
(normal, alarm, archive) and load the menu content from
the CF card.
1
Insert the CF card into the CF card slot
2
Press the MENU button and turn the J-dial to select "7.
COPY MENU SETTINGS", and then turn the S-dial
clockwise.
The <COPY MENU SETTINGS> screen is displayed.
3
Turn the S-dial clockwise, select "YES" by turning the
J-dial, and then turn the S-dial clockwise.
Save the menu on the CF card.
"SAVING FINISHED!!" is displayed when saving is finished.
A Menu copy screen description
<COPY MENU SETTINGS>
DVR TYPE VER. SA16-04
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE "YES" OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
1
2
3
4
Copy
A-1 Save the menu content in the CF card.
Front
1 Open
2 Pull out
2
Insert
Insert
2
Insert
3 Fold down
(lock)
1 Lift and
push
MENU
(J)
(S)
7.COPY MENU SETTINGS
<MAIN MENU>
<COPY MENU SETTINGS>
DVR TYPE VER. SA16-04
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE "YES" OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
<WARNING>
SAVE MENUS TO CF!!
CONTINUE?
YES
<COPY MENU SETTINGS>
SAVING FINISHED!!
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE "YES" OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !