e00_l8hae_us_7.
e00_l8hae_us_7.book Page 1 Thursday, April 8, 2004 11:14 AM PRECAUTION Declaration of Conformity CAUTION Model Number Trade Name Responsible party Address : DSR-M810 : SANYO : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 z This device complies with Part 15 of the FCC Rules.
e00_l8hae_us_7.book Page 2 Thursday, April 8, 2004 11:14 AM INTRODUCTION Main features Accessories This digital video recorder can be used to store images recorded by a monitoring camera onto its built-in hard disk. Check that you have all the parts below. Power cord Complete range of recording/playback functions z You can play back and record images at the same time. z You can record and play back audio. z The timer record function lets you make recordings at different times each day. (JP.
e00_l8hae_us_7.book Page 3 Thursday, April 8, 2004 11:14 AM CONTENTS INTRODUCTION 1 BEFORE USE .................................................5 2 NAMES AND FUNCTIONS OF PARTS ........ 7 Notes on handling internal hard disk drive components ....................................................5 Do not use the digital video recorder in the following locations: ..........................................5 The hard disk and cooling fan are consumables. ..................................................
e00_l8hae_us_7.book Page 4 Thursday, April 8, 2004 11:14 AM CONTENTS INTRODUCTION SETTINGS 4 DISPLAY/BUZZER SET .............................. 34 MENU CONFIGURATION AND OPERATIONS .....................................24 setting items ..... 34 Settings ........................................................ 35 Displaying the menu screen and sub-menu screens .........................................................24 To restore menu setting items to their initial values ...........
e00_l8hae_us_7.book Page 5 Thursday, April 8, 2004 11:14 AM 1 BEFORE USE Notes on handling internal hard disk drive components Handling the HDD unit by itself If transporting or storing the HDD unit by itself, always be sure to pack it in the specified packing first. In addition, use a method of transportation that minimizes the vibration.
e00_l8hae_us_7.book Page 6 Thursday, April 8, 2004 11:14 AM 1 BEFORE USE MENU button z Always make a test recording beforehand to check that the digital video recorder’s playback is normal. z Note that no compensation will be provided for losses due to recording or playback problems arising from problems with the digital video recorder or its connected devices during operation. z To be prepared for malfunctions or accidents, back up important recordings periodically, or record using mirroring.
e00_l8hae_us_7.book Page 7 Thursday, April 8, 2004 11:14 AM 2 NAMES AND FUNCTIONS OF PARTS Front panel 1 2 3 4 5 6 7 8 9 10 11 POWER TIMER 12 ALARM SEARCH MENU REVIEW CUE EXIT/OSD PLAY/ STOP REC/STOP STILL MENU RESET LOCK/REMOTE FULL USB LAN (LINK/ACT.) 13 1. 14 15 16 POWER indicator 11. Lights when the power is ON. Flashes when there is a problem with the hard disk or fan. (JP.10) 2. 12. [TIMER] button and indicator (JP.14) 13. [SEARCH] button and indicator (JP.
e00_l8hae_us_7.book Page 8 Thursday, April 8, 2004 11:14 AM 2 NAMES AND FUNCTIONS OF PARTS Rear panel 2 3 4 AUDIO IN LAN OUT TV RS485 SYSTEM TERMINATE NTSC ON PAL OFF 5 6 7 MIC IN IN LOOP OUT REMOTE RS485 A B C 8 VIDEO OUT NON REC OUT/ SERIES REC OUT ALARM IN ALARM RESET CLOCK SERIES ADJ REC IN ALARM OUT C IN OUT INTRODUCTION 1 C WARNING OUT FULL OUT ALL RESET 10 11 9 12 13 14 1. FAN 2. AUDIO IN terminal 12. RS-485 TERMINATE switch (JP.
e00_l8hae_us_7.book Page 9 Thursday, April 8, 2004 11:14 AM 3 INSTALLATION AND CONNECTIONS This section describes how to connect the digital video recorder to the CCTV camera and other devices. Be sure to read the instruction manuals for each connected device. Make connections carefully. Improper connections can cause smoke or malfunctions. Basic connections The connections for the camera, TV monitor, microphone and PC are shown below.
e00_l8hae_us_7.book Page 10 Thursday, April 8, 2004 11:14 AM 3 INSTALLATION AND CONNECTIONS z Connect the cable of the wired remote control (VARMN01) (sold separately) to the remote control input terminals (among the control terminals). Cut the plug off the cord, and connect the red wire to “REMOTE” and the bare wire to “C”. A 1 REMOTE B C C Red wire INTRODUCTION RS485 Connecting the power cord When you have finished making all the other connections, insert the power plug into the wall outlet.
e00_l8hae_us_7.book Page 11 Thursday, April 8, 2004 11:14 AM 1 SCREEN DISPLAY AND POSITION At power ON, the operation display area appears at the top left of the monitor screen.The operation display area shows the date/time, image quality, remaining time, and other information needed for operations. (5) Date display (JP.13) Shows the month/day/year. 05-20-04 (month-day-year) (6) Time display (JP.13) “00:00:00” is displayed when you turn the power ON for the first time.
e00_l8hae_us_7.book Page 12 Thursday, April 8, 2004 11:14 AM 2 SETTING THE LANGUAGE/CLOCK [MENU] button [ To change the language 3 [Settings] ( indicates initial setting.) Setting ENGLISH (1) LANGUAGE (2) CLOCK SET 1 Description Sets the language to English. FRANCAIS Sets the language to French. ESPAÑOL Sets the language to Spanish. ] button ] button This section describes how to set the language displayed on the monitor and how to set the digital video recorder’s internal clock.
e00_l8hae_us_7.book Page 13 Thursday, April 8, 2004 11:14 AM 2 SETTING THE LANGUAGE/CLOCK 7 Setting the time (Initial setting: 01-01-2004 THU 00:00:00) Be sure to set the correct date and time. The digital video recorder stores the date and time of recordings for use in operations such as playback and search. Example: Setting May 20, 2004, 8:30 AM 3 Use the same procedure to set the day (20), year (2004), hour (08) and minute (30).
e00_l8hae_us_7.book Page 14 Thursday, April 8, 2004 11:14 AM 3 NORMAL RECORDING/TIMER RECORDING TIMER indicator REC indicator [TIMER] button [REC/STOP] button FULL indicator Timer recording Follow the steps to record the monitored image onto the hard disk at the set time. Follow the steps below to record the monitored image. 1 Set the TV SYSTEM selector switch on the rear panel to NTSC. 1 Recording symbol Press the [REC/STOP] button. The REC indicator lights.
e00_l8hae_us_7.book Page 15 Thursday, April 8, 2004 11:14 AM 4 ALARM RECORDING ALARM indicator 3 Alarm recording When the alarm duration time (default setting: 20 seconds) ends, “AL” disappears from the operation display, the ALARM indicator stops flashing, and recording ends. Use the following procedure to have video recorded when an alarm signal is received during recording. z When the hard disk’s remaining space for recording reaches zero, the FULL indicator lights and recording ends.
e00_l8hae_us_7.book Page 16 Thursday, April 8, 2004 11:14 AM 5 NORMAL RECORDING/TIMER RECORDING PLAYBACK Follow the steps below to play back recorded images. Playback while fast-forwarding/rewinding Playback [ [ Press the [ [ ] button [ [ ] button ] button ] button OPERATION 1 ] button [STILL] button Press the [ ] or [ ] button during playback or while a still image is displayed. ] button. The PLAY/STOP indicator lights, and “ ” appears in the operation display area.
e00_l8hae_us_7.book Page 17 Thursday, April 8, 2004 11:14 AM 5 NORMAL RECORDING/TIMER RECORDING PLAYBACK Viewing still images Frame advance (reverse) [STILL] button 1 Press the [ displayed. During playback, press the [STILL] button. [ ] button [ ] button [STILL] button ] button while a still image is The still image advances by one frame. Press the [ displayed. The image becomes a still image (freezes). appears in the operation display area.
e00_l8hae_us_7.book Page 18 Thursday, April 8, 2004 11:14 AM 6 SEARCHING FOR RECORDED IMAGES Recorded images can be searched. There are two search methods available. Alarm search Image to search Lets you search and play back recorded alarm images. [SEARCH] button ] button [ [ ] button ] button OPERATION [ Search in screen 1 (1) (2) Press the [SEARCH] button while the digital video recorder is recording or stopped. The screen appears.
e00_l8hae_us_7.book Page 19 Thursday, April 8, 2004 11:14 AM 6 3 SEARCHING FOR RECORDED IMAGES Press the [ ] or [ ] button to select the image to play back. Date/time search Follow the steps below to search an image recorded by specifying its recorded date and time. The selected alarm image is displayed in the preview screen. z To display the next (previous) image Press the [ ] or [ ] button. z To display the items on the next page Press the [MENU] button.
e00_l8hae_us_7.book Page 20 Thursday, April 8, 2004 11:14 AM 6 4 SEARCHING FOR RECORDED IMAGES 6 Press the [ ] button, and set the date/time to search. Example: To search for the image from October 26, 2004, 8:00 PM Press the [ ] button to select “VIEW”, then press the [ ] button. The image in the preview screen is played back on the entire screen. OPERATION 10-26-04 20:00 (1) (2) (3) (4) (5) (1) Press the [ ] or [ ] button to select “10” (October).
e00_l8hae_us_7.book Page 21 Thursday, April 8, 2004 11:14 AM 7 COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTING [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button CompactFlash card reader CompactFlash card [ CD-R/RW drive ] button CD-R/RW 2 Use the following procedure to copy image recordings to a CompactFlash card, a CD-R/RW. CompactFlash cards and CD-RWs can also be formatted as described below. Press the [ ] and [ ] buttons to select “COPY SET” and press the [ ] button.
e00_l8hae_us_7.book Page 22 Thursday, April 8, 2004 11:14 AM 7 3 4 COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTING Press the [ ] and [ ] buttons to specify “START TIME” and “END TIME”, and then press the [ ] button. Formatting a CompactFlash card or CD-RW 1 Press the [ ] and [ ] buttons to select “COPY START”, and then press the [ ] button. Press the [SEARCH] button while the digital video recorder is recording or stopped. The screen appears. Copying of image starts.
e00_l8hae_us_7.book Page 23 Thursday, April 8, 2004 11:14 AM 8 PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION) [ ] button Use the following procedure to set the key lock function so that operation as a result of accidental pressing of buttons can be prevented. Setting the key lock function 1 Press the [ ] button for about 3 seconds while the digital video recorder is recording or stopped. When the key lock is set, a confirmation tone sounds, and the LOCK/REMOTE indicator lights.
e00_l8hae_us_7.book Page 24 Thursday, April 8, 2004 11:14 AM MENU CONFIGURATION AND OPERATIONS This section describes the menu configuration, and which menu item to select for each operation. To exit a menu screen 4 Displaying the menu screen and submenu screens [MENU] button [ ] button [ Press the [EXIT/OSD] button. The display returns to the normal screen. ] button z While recording, you can display menu screens but cannot change menu settings.
e00_l8hae_us_7.book Page 25 Thursday, April 8, 2004 11:14 AM MENU CONFIGURATION AND OPERATIONS 5. SECURITY LOCK SET (JP.36) Overview of sub-menus Lets you set passwords to restrict the users. The screens below are the sub-menu screens displayed by selecting items from the MAIN MENU. Pressing the [MENU] button while a sub-menu screen is displayed switches the display directly to the next submenu screen. 1. LANGUAGE/CLOCK SET (JP.
e00_l8hae_us_7.book Page 26 Thursday, April 8, 2004 11:14 AM 1 LANGUAGE/CLOCK SET 3 You can perform the following functions: Change the language used to display on-screen information.* Set the date and time.* Set the clock to adjust automatically for daylight savings time. Set all the devices to the same time automatically when multiple devices are connected. * See P.12. 4 Press the [ ] or [ ] button to select “MODE” under . Press the [ ] button. “USE” flashes.
e07_l8hae_us_7.fm Page 27 Thursday, April 8, 2004 11:48 AM 1 LANGUAGE/CLOCK SET 11 Press the [ ] and [ ] buttons to select the desired time, then press the [ ] button. When “USE” is selected for “MODE” under . You can set the date/time at which the time is switched from standard time to daylight savings time, and the date/time at which the time is switched back again. The cursor moves to the minutes portion of the time. Set the desired minutes in the same manner.
e00_l8hae_us_7.book Page 28 Thursday, April 8, 2004 11:14 AM 1 4 LANGUAGE/CLOCK SET Press the [ ] or [ ] button to select the desired time, then press the [ ] button. z Only an hour value can be set using “ADJUST. TIME”, and minutes and seconds cannot be set. SETTINGS 5 Press the [EXIT/OSD] button. The display returns to the normal screen. 6 Use the same procedure to set the time on the second digital video recorder.
e00_l8hae_us_7.book Page 29 Thursday, April 8, 2004 11:14 AM 2 REC MODE SET setting items (1) (2) (3) (4) (5) (6) (7) (8) (9) [Settings] ( indicates initial setting.) Item (1) (2) Setting REC/PB TIME PICTURE QUALITY SUPER+ Super highest image quality. Recording time: approx. 140 hours (300GB), approx. 56 hours (120GB) SUPER Highest image quality. Recording time: approx. 210 hours (300GB), approx. 84 hours (120GB).
e00_l8hae_us_7.book Page 30 Thursday, April 8, 2004 11:14 AM 2 REC MODE SET Starting recording again when the FULL indicator lights Settings [MENU] button [ [ 1 ] button ] button [ ] button When “OVER WRITE” is set to “OFF” and the hard disk becomes full, the FULL indicator lights and recording stops. To start recording again, first follow the steps below to erase the images recorded so far. [ ] button [ ] button [ ] button [EXIT/OSD] button Press the [MENU] button.
e00_l8hae_us_7.book Page 31 Thursday, April 8, 2004 11:14 AM 3 TIMER REC SET [MENU] button [ ] button [ ] button [ ] button [ You can set recording start/stop times using the “TIMER REC SET”. (2) [EXIT/OSD] button Timer reservations every day at the same time with the same image quality Timer setting items (1) ] button Example: Timer recording every day from 8:30 AM to 6:30 PM with the same recording rate. (3) (4) 1 Press the [MENU] button.
e00_l8hae_us_7.book Page 32 Thursday, April 8, 2004 11:14 AM 3 5 TIMER REC SET Press the [ ] button to move the cursor to the next item. Timer reservations spanning more than 24 hours Each time you press the [ ] button, the cursor moves to the following items: “WEEK” J “START” (hours, minutes) J “STOP” (hours, minutes) J “SET”. [ This section describes how to use timer reservations to record for more than 24 hours.
e00_l8hae_us_7.book Page 33 Thursday, April 8, 2004 11:14 AM 3 3 TIMER REC SET Press the [ ] or [ ] button to change the “STOP” time from “--:--” to “**:**”, then press the [ ] button. Example: To set November 17 as a holiday z You can set up to 20 days as holidays. The “DLY” item on the 8th line automatically changes to “TUE” (the day after the day set on the 7th line), and flashes. Items that are not able to be set are displayed as asterisks (*).
e00_l8hae_us_7.book Page 34 Thursday, April 8, 2004 11:14 AM 4 DISPLAY/BUZZER SET You can set the display item on the operation display area. This sub-menu also lets you set a warning buzzer to sound for alarms or when the hard disk space reaches zero. You can set items as needed.
e00_l8hae_us_7.book Page 35 Thursday, April 8, 2004 11:14 AM 4 DISPLAY/BUZZER SET Settings [MENU] button [ [ 1 ] button ] button [ ] button [EXIT/OSD] button Press the [MENU] button. The MENU indicator lights, and the screen appears. 2 Select “4. DISPLAY/BUZZER SET”, and press the [ ] button. The screen appears. 3 4 5 6 Press the [ ] and [ ] buttons to select the desired item, then press the [ ] button.
e00_l8hae_us_7.book Page 36 Thursday, April 8, 2004 11:14 AM 5 SECURITY LOCK SET Password setting (1) (2) (3) You can set passwords that restrict the users. When the security lock is set, a buzzer sounds when a user presses any of the digital video recorder’s operation buttons. Be sure to make a note of the set passwords. [Settings] ( indicates default setting.) Item (1) Password setting example ADMIN Setting Description Used to set password for administrators.
e00_l8hae_us_7.book Page 37 Thursday, April 8, 2004 11:14 AM 5 3 SECURITY LOCK SET Press the [ ] button. Setting the user password The first password entry bar “-” flashes. Example: Setting “AB123456” 1 4 Press the [ ] and [ ] buttons to move the cursor to “USER”. Press the [ ] and [ ] buttons to select the character to enter. Example: Selecting “1” 5 Press the [ ] button. The second password entry bar flashes.
e00_l8hae_us_7.book Page 38 Thursday, April 8, 2004 11:14 AM 5 SECURITY LOCK SET Setting the authorization for recording and playback operations Setting the security lock [MENU] button [MENU] button [ [ 1 ] button ] button [ [ ] button [ ] button ] button [EXIT/OSD] button Press the [ ] and [ ] buttons to move the cursor to “REC CONTROL”.
e00_l8hae_us_7.book Page 39 Thursday, April 8, 2004 11:14 AM 6 RS-485/NETWORK SET This section describes how to make the RS-485 terminal connections/settings needed to connect to an external device, and how to make the network connections needed to connect to a PC. Settings for PC or network connection An IP address will be set automatically by the PC. The following section describes the method to be used when it is necessary to set an IP address using the digital video recorder.
e00_l8hae_us_7.book Page 40 Thursday, April 8, 2004 11:14 AM 6 3 RS-485/NETWORK SET Press the [ ] and [ ] buttons to select “ADVANCED SETTING” and press the [ ] button. z When a new IP address is set using the digital video recorder, it will become valid upon leaving the screen. The screen appears. The cursor moves to “ADDRESS SET”. “DVR NAME” displays the name set for the digital video recorder when using remote control software.
e00_l8hae_us_7.book Page 41 Thursday, April 8, 2004 11:14 AM 6 RS-485/NETWORK SET 1 [Settings] ( indicates default setting.) Item REMOTE AS (1) (2) (3) (4) STATUS INFO 3 4 5 6 When the digital video recorder is operated from a controller, sets it to operate as a VCR. DVR When the digital video recorder is operated from a controller, sets it to operate as a digital video recorder. The MENU indicator lights up and the screen appears. Select “6.
e00_l8hae_us_7.book Page 42 Thursday, April 8, 2004 11:14 AM 7 POWER FAILURE/USED TIME [MENU] button [ ] button [ ] button [ ] button [ ] button [EXIT/OSD] button You can check the date/time of power failures and the amount of hard disk operation time. SETTINGS 1 Press the [MENU] button. The MENU indicator lights, and the screen appears. 2 Select “7. POWER FAILURE/USED TIME”, and press the [ ] button. The screen appears.
e00_l8hae_us_7.book Page 43 Thursday, April 8, 2004 11:14 AM 8 MENU UPLOAD/DOWNLOAD [MENU] button [ ] button [ ] button [ ] button CompactFlash card reader CompactFlash card [ ] button [EXIT/OSD] button You can save menu settings onto a CompactFlash card. This sub-menu also lets you read menu settings saved on CompactFlash cards. This function proves useful when identical settings are to be used on a number of different digital video recorders.
e00_l8hae_us_7.book Page 44 Thursday, April 8, 2004 11:14 AM 8 MENU UPLOAD/DOWNLOAD 2 To save menu items to CF card 1 Press the [ ] button. Press the [ ] and [ ] buttons to select “YES”, then press the [ ] button. Uploading starts. The screen appears. “NO” flashes. When you have finished loading, the display returns to the
e00_l8hae_us_7.book Page 45 Thursday, April 8, 2004 11:14 AM 8 3 MENU UPLOAD/DOWNLOAD Press the [ ] and [ ] buttons to select “LOAD MENUS FROM CF” and press the [ ] button. Formatting CompactFlash cards 1 The screen appears. “NO” flashes. Press the [ ] and [ ] buttons to select “FORMAT CF”, then press the [ ] button. The screen appears. “NO” flashes. 4 Press the [ ] and [ ] buttons to select “YES” and press the [ ] button. 2 Uploading of data starts.
e00_l8hae_us_7.book Page 46 Thursday, April 8, 2004 11:14 AM 9 HDD SET [MENU] button [ ] button [ ] button [ ] button [ 4 Press the [ ] and [ ] buttons to select “YES”, then press the [ ] button. The “HDD INITIALIZING!” screen appears, and the hard disk is initialized (reformatted). When the process has finished, the display returns to the MENU screen.
e00_l8hae_us_7.book Page 47 Thursday, April 8, 2004 11:14 AM 9 HDD SET Adding a hard disk To add a hard disk, contact a Sanyo service center. When adding a hard disk, use an add-on type hard disk unit (sold separately). [Setting conditions] z After adding a hard disk, be sure to initialize it. Note that both hard disks will be initialized, and any data on the original hard disk will be erased.
e00_l8hae_us_7.book Page 48 Thursday, April 8, 2004 11:14 AM 1 INTERFACE SPECIFICATIONS RS-485 specifications RS-485 termination switch settings Data format Mode Termination settings When connecting multiple devices, you must make termination settings on both end devices. z Set the RS-485 termination switch of both end devices to ON. z Be sure to set the RS-485 termination switches of all devices in between (devices other than the first and last devices) to OFF.
e00_l8hae_us_7.book Page 49 Thursday, April 8, 2004 11:14 AM 1 INTERFACE SPECIFICATIONS DVR/VCR command table The table below shows the commands supported by the digital video recorder.
e00_l8hae_us_7.book Page 50 Thursday, April 8, 2004 11:14 AM 2 SPECIFICATIONS Television system Picture resolution Search mode Compression Picture quality Recording type Recording speed Recording area Playback Time/date search Search by time and date Alarm search Search by alarm event list English/French/Spanish Month/Day/Year/Hours/Minutes/Seconds 1.0 V (p-p) / 75 Ω unbalanced (BNC) 1.
e00_l8hae_us_7.
e00_l8hae_us_7.book Page 52 Thursday, April 8, 2004 11:14 AM INDEX A key lock ..........................................................................23 add a hard disk .............................................................. 47 ADDRESS ..................................................................... 41 ADJUST. TIME .............................................................. 27 ADMIN ........................................................................... 36 ADVANCED SETTING ..........
e00_l8hae_us_7.book Page 53 Thursday, April 8, 2004 11:14 AM INDEX sub-menus ..................................................................... 25 T TIME DATE SEARCH ................................................... 19 [TIMER] button .............................................................. 14 TIMER indicator ............................................................. 14 TIMER REC SET ........................................................... 31 Timer recording ..............................
sp00_l8hae_us_7.
