SANYO Canada Inc. www.sanyo.
Thank-you for choosing SANYO. This audio system includes a built-in CD player, AM/FM stereo tuner, iPod dock, alarm clock, timer, motorized CD door, removable speakers and remote control. The unit can be wall mounted in order to save desk or counter space.
FCC information For CD player section: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
12. Grounding or Polarization - This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21.
LOCATION OF CONTROLS - UNIT 1 2 3 4 5 6 7 8 9 10 11 12 13 28 14 27 26 15 25 16 17 24 23 18 19 22 20 21 40 39 41 38 29 37 30 31 36 35 34 32 33 6
LOCATION OF CONTROLS - UNIT (cont.) 1. Detachable Speaker (L) 12. Detachable Speaker (R) 2. Insert 13. Surround Indicator 3. CD Door OPEN/CLOSE Button Open or close the CD door 4. iPod/CD-SKIP/TUNING/CLOCK Time Backward Button ( ) -iPod/CD-Skip/search backward -TUNER-Backward tuning or station search -Clock or Timer-Select the time -SUREWAKE vol level setting 14. SURROUND ON/OFF Button Press to turn the surround sound ON or OFF. The indicator lights while surround is ON Button 15.
LOCATION OF CONTROLS - UNIT (cont.) 23. CD/iPod STOP Button ( ) Interrupting the CD/iPod playback/clearing the CD program iPod charging mode 32. AUDIO OUT for iPod (R) 24. CD PLAY/PAUSE Button To play or pause CD playback 34. VIDEO OUT for iPod 33. AUDIO OUT for iPod (L) 35. HEADPHONE Jack (3.5mm) Connect a pair of stereo headphones (not supplied) for private listening 25. PROG/MENU/CLOCK SETTING Button -Tuner/CD program/Clock setting button (in off mode) -iPod menu selection 36.
INSTALLATION (Speakers and Decorative Insert) DISASSEMBLE AND FIX THE DECORATIVE INSERT 2 1 3 To remove the insert, release 3 pcs screws (1), then pull out the insert from the main unit. To fix the insert, place it with two holes into main unit speaker holder (2), then fix it by 3 pcs screws (3). PLACE AND FIX THE SPEAKER Insert the speaker stud into the hole of the main unit (1). Push the speaker backward to the end until it clicks (2).
ANGLE ADJUSTMENT (Speakers) Used to connect the bracket (included) to set the speaker box on an angle. VERTICAL ANGLE Insert the bracket with (A) side and push upward to adjust for vertical angle. 1 2 A B TILT ANGLE Insert the bracket with (B) side and push upward to adjust for desired angle.
INSTALLATION (Wall Mounting) Installation options: Wall mount To mount the center section on the wall: Position the bracket (supplied) on the wall (as show below) where you want to hang the whole unit. Drill 2 holes slightly undersized for a firm fit. Secure the bracket on the wall using 2 dowels and 2 screws (supplied). The mounting screws should be anchored into solid wall support, such as wood frame or concrete wall. Mount the center unit onto the wall bracket.
REMOTE CONTROL Battery Installation 1. Remove the battery tray by pressing point (1a) inside, then sliding point (1b) area at the same time. 2. Pull out the battery tray. 3 Install or replace the button-type battery “CR2032” (supplied). 4 Close the battery tray. Note: Pull out insulation tag from the button battery tray before operating the remote control.
LOCATION OF CONTROLS - REMOTE CONTROL (Cont.) 42. MUTE Button To mute the sound 56. Volume DOWN Button ( - ) To decrease volume level 43. CD Door OPEN/CLOSE Button Press to open or close the CD door at CD mode 57. iPod/CD-SKIP/TUNING/CLOCK time Backward Button ( ) -iPod/CD-Skip/search backward -TUNER-Backward tuning or station search -Clock or Timer-Select the time -SUREWAKE vol level setting 44. SUREWAKE/TIMER Button To activate surewake/deactivate the timer 45. Remote Control Transmitter 58.
POWER SUPPLY The cord is fixed on main unit. 120V AC, 60 Hz NOTE: This unit is equipped with a polarized plug. If you have difficulty inserting the plug, turn it over and reinsert it. CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AC power operation BATTERY SUPPLY (For Tuner/Clock Memory Back-up) Install batteries (not supplied). Observe + and - signs.
OPERATING INSTRUCTIONS POWER ON/OFF When the AC power is connected, “-- -- : -- --“ shows on the LCD display. 1. Press the POWER/STANDBY button to turn the unit 'ON'. /ON Note: The LCD display lights up and “HELLO” greeting shows on display, the STANDBY LED light goes off. Volume at 13 (max 30). 2. You can now select your desired music source by pressing one of the function buttons: TUNER/BAND or CD PLAY/PAUSE or AUX or iPod on main console. Example : FM mode 3.
TIMER ON/OFF SETTING NOTE: The clock should be adjusted before the Timer On/Off setting. 1. Press the SUREWAKE TIMER button on remote control once, the TIMER ON indicator and hour digit begin to flash. 2. Press the / to adjust the hour time up or down. Be sure to set the hour correctly for AM or PM. 3. Press the SUREWAKE TIMER button once, the minute digits begin to flash. 4. Press the down. / to adjust the minute time up or 5.
BASIC OPERATION BASSXPANDER Control Electronic volume control Press the BASSXPANDER button to get the rich bass sound. Electronic volume control display BASSXPANDER shows on display 1. Press VOL-DOWN (-) button to adjust sound level down, the volume level (00 - 30) will be shown in the LCD display. To switch off the BASSXPANDER function, press the button once more. 2. Holding down the button will result in continuous decrease of the sound level. BASSXPANDER shows on display 3.
LISTENING TO THE RADIO Auto tuning - Press the TUNING forward or backward buttons momentarily and release. The tuner will move forward or backward to the next available station. 1. Press the POWER/STANDBY button to turn the system 'ON'. 2. Press the TUNER/BAND button to select the radio function. Manual Tuning - Press and hold the SKIP forward/ backward buttons until the display approaches your desired station. Then tap the buttons repeatedly until the display shows the exact frequency. TUNER/ BAND 5.
Playing the disc ( ) Press PLAY/PAUSE button to play the CD. PLAYING COMPACT DISCS 1. Switch on the power and press the CD PLAY/ PAUSE button to select the CD mode. Playing track 1 2. If there is no CD inside, a "NO DISC" display will appear. When there is no disc Pause the playing ( ) Press PLAY/PAUSE button while the disc is playing, the playing time will flash. Loading a disc While paused 1. Press the CD DOOR OPEN/CLOSE button to open the CD door. Press PLAY/PAUSE button again to resume.
To repeat a track or disc Press REPEAT button on remote control one time, "one track repeat" will be active. “REPEAT” shows on display. With one more press, "all track repeat" will be active. “REPEAT ALL” shows on display. All track repeat One track repeat With one further press, the repeat mode is cancelled. Random play function Press RANDOM button on remote control during CD play or stop mode to start random play. Pressing once again will cancel the function.
PLAYING MP3 DISC 1. Switch on the power and press the CD PLAY/ PAUSE button to select the CD mode. Loading a MP3 disc. To repeat a track or album 1. After reading TOC Press the REPEAT button on remote control once, MP3 plays one track repeatedly and REPEAT is displayed. One track repeat 2. Press the FOLDER select desired album. or buttons to 2. Press this button twice, MP3 plays all tracks repeatedly and REPEAT ALL is displayed. All track repeat 3. 4. Press the SKIP select desired track.
PROGRAMMED PLAYBACK The MP3 player enables you to program up to 64 tracks in a sequence of your choice. First select CD stop mode. 1. Press the PROG button once. 5. Press the PROG one more time, and track 10 of folder 3 is stored. 2. Press the SKIP or buttons to select your desired folder; for example folder 3. 6. Continue to program, repeating steps 1 to 5. Reviewing programs Press the PROG button repeatedly. The track number programmed on each program number will be displayed. 7. 3. 4.
iPod OPERATION When connecting an iPod to this iPod Dock, please ensure that the correct removable insert is used. iPod dock insert This iPod Dock comes with 6 removable inserts. To place a dock insert: 1. Refer to the compatibility table as that follows and select the correct dock insert for the iPod. Using the correct insert ensures the proper fit for your iPod. This can help to reduce the stress on the iPod dock connector when operating the iPod. 2.
Dock Insert Compatibility Photo 40 / 60GB A 5G with Video 30GB 60GB 80GB nano 1GB 2GB 4GB (1st generation) nano (2nd generation) photo 4G B C X 20GB 30GB 40GB 60GB X X X X 40GB nano D X X E X X X X X X X X X X X X X 4GB 10GB 15GB 20GB 30GB 40GB 20GB F 20GB 6GB 3G mini 2GB 4GB 8GB 40GB mini 20GB (Color)/ Photo 30GB X X 24
Charging your iPod Please ensure you are using the correct insert for your iPod and it is properly docked. FAILURE TO DO SO MAY CAUSE THE iPod can’t charging result in its inability to charge. Whilst the iPod is docked in the system, it will recharging (until fully charged) by power on the system unit. Once the iPod is removed from the dock, the main console will go to standby mode then turn off. Note: there are no charging function while main console at power off mode. Listening to your iPod 1.
TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service. Symptom Possible cause Solution Radio Noise or sound distorted on AM or Station not tuned properly for AM Retune the AM or FM broadcast station. or FM FM broadcasts. FM: Antenna wire is not extended. Extend FM antenna wire. AM: Frame antenna is not Placed the frame antenna until positioned correctly. best reception is obtained.
SPECIFICATIONS AC Power Power Output Dimension of: Unit Radio section AC 120V, 60Hz DC 3V (1.5V x 2 “AAA” batteries for tuner and clock memory). Batteries are not supplied. CD Section Vertical Front Loading CD Speaker System Woofer: 4", 4 ohm Tweeter: 2", 4 ohm 5 W/CH 10% THD Remote Control 32 Keys, Battery size “CR2032” (Battery Included) 619(W) x 200(D) x 315.5(H)mm Tuning : PLL with 40 Presets (FM 30, AM 10) Freq. Range : AM 520-1710KHz FM : 87.
WARRANTY WARRANTY APPLICATION New, unused SANYO Audio products purchased through a SANYO authorized dealer in Canada are warranted against manufacturing defects in materials and workmanship for ONE YEAR from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. SANYO CANADA INC. 'S RESPONSIBILITY During the warranty period, SANYO Canada Inc.
SANYO Canada Inc.
