DVD-SL25 INSTRUCTION MANUAL DVD Player z /ON LAST MEMO PROGRAM PICTURE OPEN/CLOSE MODE SURROUND /RANDOM REPEAT A-B REPEAT ON SCREEN ZOOM ANGLE SUBTITLE CHANGE SETUP ANGLE REPLAY MENU 4 SUBTITLE ON/OFF b AUDIO ENT a RETURN TOP MENU 5 REV SLOW FWD SLOW PAUSE/STEP PREV NEXT PLAY REV FWD CLEAR 1 2 3 4 5 6 7 8 9 C 0 SEARCH MODE f q e n a z/ON REMOTE CONTROLLER RB-SL25 TM ® TM 1AD6P1P1806-A (CA) English
CONTENTS Accessories ......................................................................... E1 Controls ............................................................................... E3 Remote Control ................................................................... E4 Before Connection .............................................................. E5 Choosing a Connection ................................................... E5 Basic Connections .........................................................
CAUTION This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CONTROLS Front Panel 8 f e 7 6 n a z/ON q 1 1. 2. 3. 4. 3 2 Disc tray Open/Close button (q) FL display Remote sensor (IR) 5. 6. 7. 8. 4 5 Power button (z/ON) Play button (a) Stop button (n) Skip/Next/Previous buttons (f, e) FL Display 1 2 3 CD 4 5 6 7 DVD LM 3D ALL REP 1 A–B PGM M P 3 RND WMA 12 11 1. 2. 3. 4. 5. 6. 7.
REMOTE CONTROL 1 2 z /ON LAST MEMO Controls 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33.
BEFORE CONNECTION IMPORTANT INFORMATION: • To connect this unit to a TV, TV must have a set of Audio/Video composite input jacks (RCA-type). You cannot use an antenna terminal to connect this unit. If your TV has only an antenna terminal, please purchase the TV with Audio/Video input jacks or the RF modulator. Do not connect the unit to a VCR directly. The playback picture will be distorted because DVD video discs are copyprotected.
BASIC CONNECTIONS Connecting to a Conventional TV (Example 1) Connect the DVD video player to your TV. DVD video player COMPONENT VIDEO OUT Y PB PR VIDEO OUT SELECT S R COMPONENT (Red) R To AC 120V, 60Hz L OPT. AUDIO OUT VIDEO OUT (White) L S-VIDEO OUT DIGITAL OUT AUDIO VIDEO INPUT 1 To AUDIO OUT jacks (White) L Notes: • Please refer to your TV instruction manual.
Using RF Modulator If your TV does not have a Video input jack and has an antenna terminal only, please purchase the *RF Modulator (not supplied). (*Please consult your audio/video dealer.
Connecting to a TV with Progressive-scan Capability (Example 2) Your TV must be capable of handling progressive scanning and have component video input capability. *Component video cable (not supplied) Red DVD video player Blue Green To COMPONENT VIDEO OUT jacks COMPONENT VIDEO OUT Y PB PR VIDEO OUT SELECT S R S-VIDEO OUT COMPONENT L OPT.
ADDITIONAL CONNECTION EXAMPLES Connecting to an Audio System and TV (Example 3) Connect the DVD video player to an Audio System and a TV. DVD video player COMPONENT VIDEO OUT Y PB PR VIDEO OUT SELECT S R To AC 120V, 60Hz L OPT. AUDIO OUT (Red) R COMPONENT VIDEO OUT (White) L S-VIDEO OUT DIGITAL OUT To VIDEO OUT jack (Yellow) To video input (Yellow) To AUDIO OUT jacks Notes: • Please refer to the instruction manual of your Audio System and TV.
Notes: • For VIDEO connection, please refer to “BASIC CONNECTIONS”. • Please refer to the instruction manual of your amplifier. • When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made.
Connecting to an Amplifier with Dolby Pro Logic Decoder (Example 6) Amplifier with Dolby Pro Logic Decoder To AUDIO INPUT jacks *Audio cable (not supplied) Center speaker To AUDIO OUT jacks Front left speaker COMPONENT VIDEO OUT Y PB PR Front right speaker VIDEO OUT SELECT Subwoofer S R S-VIDEO OUT COMPONENT L AUDIO OUT OPT. VIDEO OUT DIGITAL OUT Surround left speaker Note: Please refer to your amplifier instruction manual.
PLAYABLE DISCS The following types of discs can be played on this unit. CAUTION: • Disc type and logo mark • DVD-Video TM • • Audio CD • • Region Number Region number (Regional restriction code) is built-in to the unit and DVD video discs. Region number “1” or “ALL” of DVD video discs can be used on this unit. 1 Handling, Storing and Cleaning Discs • ALL DVD Video Disc • DVD video discs are divided into titles, and the titles are subdivided into chapters.
BASIC OPERATION Preparations Basic Playback • • Notes: • Do not touch the disc tray while it is moving. • Never place anything except a disc on the disc tray. Foreign objects can damage the unit. • Do not apply excessive force to the disc tray. • Discs must be placed on the disc tray one at a time. Turn on the power (TV, Audio System, AV amplifier, etc.). Select the video input source from your television. (Please refer to your TV instruction manual.
4. Press [q] (or [OPEN/CLOSE] on the remote control) again. • The disc tray closes. • “Reading” appears on the TV screen. Note: Some discs may start playback automatically. Stopping Playback [DVD] • Press [n] once during playback. “Resume n” appears briefly on the TV screen. When you press [a PLAY] (or [a] on the unit), playback starts automatically from the point where you stopped. “a” appears briefly on the TV screen. Note: Some discs may not resume playback. • Press [n] twice during playback.
Selecting a DVD Menu Notes: • The operation may differ depending on the disc used. • Selecting a menu may not be possible on some discs. z /ON LAST MEMO 1. Press [MENU]. The main menu screen will appear. PICTURE OPEN/CLOSE MODE PROGRAM SURROUND /RANDOM REPEAT A-B REPEAT ON SCREEN ZOOM ANGLE SUBTITLE CHANGE SETUP ANGLE REPLAY MENU 1 4 SUBTITLE ON/OFF b Note: Press [MENU] again to resume playback. AUDIO ENT a 3 2 RETURN TOP MENU 5 REV SLOW FWD SLOW PAUSE/STEP 2.
Title Search [DVD] Important Note: 1. Press [SEARCH MODE] once during playback or in the stop mode. The title search screen appears on the TV screen. Example: “ ” may appear on the TV screen during operation. This icon means that the function is not available on the disc now. REV SLOW Title Search FWD SLOW PAUSE/STEP -- /28 PREV 2. Press the number button(s) to enter the title number. Example: To select Title No.3, press [3]. To select Title No.10, press [1], then [0]. To select Title No.
Fast Playback Fast forward playback Press [FWD c] repeatedly to select the fast speed forward playback (up to 200 times normal speed in DVD). [DVD] c 1 v c 2 v c 3 v c 4 (4 steps) [CD] c 1 v c 2 (2 steps) CHANGE SETUP MENU 4 SUBTITLE ON/OFF b AUDIO ENT a RETURN TOP MENU 5 REV SLOW FWD SLOW PAUSE/STEP PREV Press [a PLAY] to return to normal playback.
Picture Zoom (Pin Point Zoom) [DVD] PROGRAM 1. Press [ZOOM] during normal/slow playback or still picture. The pin point guide appears on the TV screen. ZOOM SURROUND /RANDOM REPEAT A-B REPEAT ON SCREEN ZOOM ANGLE SUBTITLE CHANGE SETUP ANGLE REPLAY MENU 4 SUBTITLE ON/OFF b ENT 1 2 3 4 5 6 7 8 9 AUDIO ENT 4, a, 5, b a RETURN TOP MENU 5 REV SLOW FWD SLOW PAUSE/STEP PREV NEXT PLAY REV The guide divides the screen into nine, and the number shows the point.
Repeat Playback Press [REPEAT] during playback (or programmed playback) of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode will be changed as follows.
z /ON LAST MEMO Random Playback [CD] 1. Press [PROGRAM/RANDOM] once in the stop mode. • “Random” appears on the TV screen. 1 PICTURE OPEN/CLOSE MODE PROGRAM SURROUND /RANDOM REPEAT A-B REPEAT ON SCREEN ZOOM ANGLE SUBTITLE CHANGE SETUP ANGLE REPLAY MENU 4 2. Press [a PLAY] to begin random playback. • “RND” appears on the FL display. The unit will automatically select tracks at random. SUBTITLE ON/OFF b AUDIO ENT a RETURN TOP MENU 5 REV SLOW Notes: • To stop random playback, press [n].
Selecting Subtitle Language [DVD] This operation works only with discs on which multiple subtitle languages are recorded. 1. Press [SUBTITLE ON/OFF] during playback. The subtitle language mark appears. (Example: If “ Off” appears, press the button again. z /ON LAST MEMO 1/3 en) PROGRAM 2 1 2. Press [SUBTITLE CHANGE] repeatedly until the desired subtitle language appears on the TV screen. After a few seconds, “ ” disappears.
Selecting On-Screen Information For improvement, on-screen displays subject to change without notice. Press [ON SCREEN] repeatedly to show the disc information (Title, Chapter, Title elapsed playing time, Language, etc.). Example for DVD: 1. Press [ON SCREEN] during playback. Example for Audio CD: 1. Press [ON SCREEN]. Chapter remaining playing time Title elapsed playing time Track elapsed playing time 02:29 00:08:20 00:01:45 2. Press [ON SCREEN] again. Track elapsed playing time 2.
MP3/WMA CD OPERATION Before Starting MP3/WMA CD Playback This unit can play back the CD that has recorded music data, MP3 or WMA (Windows Media Audio) files. • The file system is ISO9660 Level 1 and Level 2. • If the CD has both audio CD tracks and MP3/WMA files, only audio CD tracks are played. • It would take 30 seconds or more for this unit to read MP3/ WMA files depending on its structure. • This unit can recognize up to 256 files or folders per disc.
Stopping Playback z /ON LAST MEMO PROGRAM Press [n] during playback. “n” appears briefly on the TV screen and playback stops completely. PICTURE OPEN/CLOSE MODE SURROUND /RANDOM REPEAT A-B REPEAT ON SCREEN ZOOM ANGLE SUBTITLE CHANGE SETUP ANGLE REPLAY MENU Pause 4 5 SUBTITLE ON/OFF 4 b AUDIO a ENT Press [k PAUSE/STEP] during playback. • “k” appears briefly on the TV screen. • “k” appears on the FL display. Note: The sound is muted.
PICTURE DISC OPERATION KODAK Picture CD Playback With KODAK Picture CD, it’s easy to turn film into pictures you can email from your PC and view on this DVD video player! Just bring your film in for processing, and check the box for KODAK Picture CD. You’ll get back your prints and negatives as usual - plus you’ll get a special CD that contains your pictures along with software that lets you view, enhance, share, and print your pictures from your computer and view them on this DVD video player.
JPEG CD Playback Picture Zoom You can also view digital images from JPEG files on disc created by your computer. • It would take 30 seconds or more for this unit to read the JPEG files depending on its structure. • Some JPEG files cannot be played back depending on the recording conditions. 1. Press [k PAUSE/STEP] at the desired picture (KODAK Picture CD and JPEG CD). 1. Load the disc with the label facing up on the disc tray. (Please refer to “MP3/WMA CD OPERATION” on page E23.
INITIAL SETTINGS Once the initial settings have been completed, the unit can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even if the power is turned off. Setting Language 1. Press [SETUP] in the stop mode. The setup screen appears. “Language” is highlighted. Language Display Digital Out Parental Notes: • In this instruction manual, the language in on-screen display is English.
Setting Display 1. Press [SETUP] in the stop mode. The setup screen appears. Language Display Digital Out Parental z /ON LAST MEMO PROGRAM 2. Press [a] to select “Display”. SETUP 3. Press [ENT]. “Display” screen appears.
Setting Digital Out z /ON LAST MEMO If the optical DIGITAL OUT jack is connected to the amplifier, you must set as follows: SETUP 1. Press [SETUP] in the stop mode. The setup screen appears. PICTURE OPEN/CLOSE MODE PROGRAM SURROUND /RANDOM REPEAT A-B REPEAT ON SCREEN ZOOM ANGLE SUBTITLE CHANGE SETUP MENU 4 SUBTITLE ON/OFF b ENT AUDIO ENT Display Digital Out a RETURN TOP MENU 5 REV SLOW Language ANGLE REPLAY Parental o a p FWD SLOW PAUSE/STEP PREV NEXT PLAY 2.
Setting Parental 1. Press [SETUP] in the stop mode. The setup screen appears. SETUP ON SCREEN ZOOM SUBTITLE CHANGE SETUP ANGLE MENU Display Digital Out ENT Parental o 4 SUBTITLE ON/OFF b Language ANGLE REPLAY AUDIO ENT a a RETURN TOP MENU 5 REV SLOW FWD SLOW p PAUSE/STEP 2. Press [a] to select “Parental”. PREV 3. Press [ENT]. “Parental” screen appears.
LANGUAGE CODE LIST Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and “DVD Menu” on page E27.
TROUBLESHOOTING GUIDE If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem. SYMPTOM No power. POSSIBLE CAUSE No power plug connection at the AC wall outlet. CORRECTIVE ACTION Insert the power plug into the AC wall outlet. The power is on, but the player does not No disc is loaded. work. Load a disc. No picture.
SYMPTOM The operation or display is not normal. POSSIBLE CAUSE CORRECTIVE ACTION 1. Disconnect the power cord. 2. Reconnect the power cord. 3. Resume operation. The unit must be reset. The remote control does not work properly. The batteries in the remote control are weak, or Check the battery polarity (+ or -). Replace the batteries. (See page E4.) installed incorrectly. The remote control is not aimed at the remote Aim the remote control at the remote sensor window. sensor window. (See page E4.
THE SANYO COMFORT WARRANTY AUDIO/VIDEO PRODUCTS WARRANTY APPLICATION New, unused Sanyo Audio/Video products purchased through a Sanyo authorized dealer in Canada are warranted against manufacturing defects in materials and workmanship for ONE YEAR from the date of purchase by the original retail purchaser. This warranty only applies in favor of the original retail purchaser of the warranted product. SANYO CANADA INC.’S RESPONSIBILITY During the warranty period, SANYO Canada Inc.
-E35- SANYO Canada Inc.
