!"#$%&'$%()**+ ,- INSTRUCTION MANUAL DVR Utility Software VA-SW804 VA-SW80LITE
!"#$%&'$%()**+ ,- CONTENTS DVR UTILITY SOFTWARE FEATURES . . . . . 2 BROADCAST TRANSMISSION SETTINGS (BROADCAST WINDOW) . . . . . . . . . . . . . . . 41 SOFT WARE VERSION . . . . . . . . . . . . . . . . . . 2 IMAGE DISPLAY WINDOWS . . . . . . . . . . . . 43 NETWORK CONFIGURATION . . . . . . . . . . . . 3 ■ Display Screen Type . . . . . . . . . . . . . . . . 43 SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . 4 ■ Switching Display Windows . . . . . . .
!"#$%&'$%()**+ ,- DVR UTILITY SOFTWARE FEATURES This software is a remote monitoring system for digital video recorders (DVR) and computer terminals that are connected via a network. It includes an extensive range of functions that are designed to make optimal use of the latest in technology and network features. It can cater to a wide variety of monitoring needs including ease of operation and system expandability.
. !"#$%&'$%()**+ ,- NETWORK CONFIGURATION This system consists of DVRs, monitoring cameras and computer terminals that are used for remote monitoring. All devices in the system are connected through a dedicated local area network (LAN). ● Applicable models: DSR-M804 (4-channel type), DSR-M800 (1-channel type) The network configuration allows both models to be connected to the network without any problems.
!"#$%&'$%()**+ ,- NETWORK CONFIGURATION Distinction between “Master” and “Slave” A master computer is a computer terminal that has operating privileges available for registering and deleting DVRs that are connected to the network. The default setting is for one master computer.
/ !"#$%&'$%()**+ ,- TCP/IP SETTINGS TCP/IP (Transmission Control Protocol/Internet Protocol) is a standard protocol that is used for the Internet and intranets. When using the software on a network, you should first change the TCP/IP settings as required in accordance with the operating systems (OS) of the various computers that on the network that are to be used.
0 !"#$%&'$%()**+ ,- INSTALLING THE SOFTWARE Install the DVR Utility Software to the computer that is connected to the network. The following procedure will install the hardware key driver and the MP2 viewer at the same time. 1 2 3 4 Insert the DVR Utility Software CD into the CD-ROM drive of the computer. The “Welcome” window appears. Click [Next] in the “Welcome” window. Click [Yes] in the “License Agreement” window.
1 !"#$%&'$%()**+ ,- INSTALLING THE SOFTWARE 6 Installation will begin. Installation of the software will begin, and a progress bar showing the installation progress will appear in the “Setup Status” window. ● Version Updates When updating the DVR Utility Software from version VA-SW800 to VA-SW804, you can follow the procedure given below to reuse the DVR registration list that was created by the VA-SW800 version. 1 Uninstall version VA-SW800.
!"#$%&'$%()**+ ,- LOGGING IN/LOGGING OFF/DISPLAY LANGUAGE SETTING The user level for each user on the network can be set to one of four levels. The user level is verified by means of the user name and password that are entered when the user logs in. ■ User Level Different operating privileges are set for each user level. The range of operations that are permitted to be carried out by users depends on their user level.
!"#$%&'$%()**+ ,- LOGGING IN/LOGGING OFF/DISPLAY LANGUAGE SETTING ■ Logging In 1 Hardware key installation Insert the accessory hardware key into the USB port of the computer. If the hardware key is not installed, the software will operate as the Lite version, and some functions will be disabled. (P.8, 11) 2 Serial No. input (VA-SW80LITE) When the software is run for the first time after installation, the serial number input dialog box will be displayed.
!"#$%&'$%()**+ ,- LOGGING IN/LOGGING OFF/DISPLAY LANGUAGE SETTING ■ Logging Off Click on the toolbar to close the connection. Make sure that you carry out this disconnect operation when exiting the software and closing the program window. ■ Display Language Setting This software uses English as its default display language.
!"#$%&'$%()**+ ,- BASIC WINDOW FLOWCHART When the software is started and a user has logged in, the main window for live image monitoring and recording/playback is displayed. The software lets you display a variety of operating windows and setting windows starting from the main window, as shown in the flowchart diagram below.
!"#$%&'$%()**+ ,- FUNCTIONS OF EACH MAIN WINDOW (MONITORING, RECORDING AND PLAYBACK WINDOW) COMPONENT The main window is the initial window that is displayed the first time the software is run. This is the basic window for carrying out live image monitoring and recording and playback operations.
. !"#$%&'$%()**+ ,- FUNCTIONS OF EACH MAIN WINDOW (MONITORING, RECORDING AND PLAYBACK WINDOW) COMPONENT ● BROADCAST (P.41) ● This displays the “BROADCAST” window. This window is used for issuing batches of basic commands such as commands to start or stop recording to the DVRs that are connected to the system. TIMER DOWNLOAD (P.66) ● This displays the “TIMER DOWNLOAD” window. Timer reservations can be made for downloading recorded images. TAMPER DETECT (P.
!"#$%&'$%()**+ ,- BASIC NETWORK SETTINGS (User Level: ID4) In order to use a computer to control DVRs that are on the network, you first need to set some basic network-related system conditions. Click the icons on the toolbar in the main window to display the respective setting windows, click on the tab indexes to specify a particular setting menu, and use these setting menus to make the settings. ■ Initial Setup: SETUP Window (P.
/ !"#$%&'$%()**+ ,- BASIC NETWORK SETTINGS (User Level: ID4) ■ Clock Settings and System Updates: CLOCK & SYSTEM Window (P.23) B This consists of the following four types of tabs which can be used for operations such as setting the clock, updating the firmware and displaying system information. 1 CLOCK SET tab This is used to set the current time for selected DVRs. 2 SYSTEM UPDATE tab This is used to update the firmware for selected DVRs.
0 !"#$%&'$%()**+ ,- BASIC NETWORK SETTINGS (User Level: ID4) ■ Menu Settings: MENU Window (P.28) C This window contains the following seven tabs. They are used to carry out operations such as setting recording conditions and setup environments for selected DVRs. 1 LANGUAGE/D.S.
1 !"#$%&'$%()**+ ,- OPERATION OF SETTING BUTTONS The following operation buttons are displayed in the various setting windows such as the initial setting and menu setting windows. The basic functions of each button are the same for each window. Button Table setting Button function and related operations Tab input data is saved, but it is not sent to the DVR.
!"#$%&'$%()**+ ,- INITIAL SETUP (SETUP WINDOW) (User Level: ID4) The “SETUP” window is the first window that is displayed after the software has been installed. It contains two tabs: the “SYSTEM SETUP” tab and the “REGISTER DVR” tab. These tabs are used to carry out initial settings relating to the network configuration and the system environment. Click on the toolbar to display the “SETUP” window, and then click a tab index to specify a tab.
!"#$%&'$%()**+ ,- INITIAL SETUP (SETUP WINDOW) (User Level: ID4) 2 4 DOWNLOAD AUTHORITY (Default setting: ID2, ID3) This sets the download operation permissions for ID2 and ID3 user levels. Use the buttons to specify which operations are to be allowed for each user level and then click [OK]. Operations can also be enabled for user level ID2 and disabled for the higher user level ID3.
!"#$%&'$%()**+ ,- INITIAL SETUP (SETUP WINDOW) (User Level: ID4) ■ REGISTER DVR tab (Operation only possible at master computer) The operations in this tab are limited to the master computer only. They let you register and delete DVRs that are connected to the monitoring network. Slave computers obtain the registration information by communicating with the master computer.
!"#$%&'$%()**+ ,- INITIAL SETUP (SETUP WINDOW) (User Level: ID4) 4 9 DVR attribute group entry box (GROUP) When registering a new DVR, type the attribute group (such as setup location) for the DVR in this box using 10 alphanumeric characters or less. Select the address that is displayed (in blue) in the registration list and then double-click the address.
!"#$%&'$%()**+ ,- INITIAL SETUP (SETUP WINDOW) (User Level: ID4) ● Deleting a DVR registration Follow the procedure below to delete a DVR registration. B Manual setting method (A maximum of 250 devices can be set.) 1 2 3 4 5 Select “MANUAL” in the “TCP/IP ADDR.” box. The manual setting mode for addresses will be enabled. Manually set “IP ADDRESS” using the “NETWORK SET” menu for the DVR.
. !"#$%&'$%()**+ ,- CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4) The “CLOCK & SYSTEM” window contains four tabs which can be used for tasks such as setting the time, updating the firmware and displaying system-related information. Click display the setting window and then click a tab index to select a tab.
!"#$%&'$%()**+ ,- CLOCK AND SYSTEM UPDATE SETTINGS ■ SYSTEM UPDATE tab (User Level: ID4) 2 1 Use this tab window to specify a filename to use for updating DVR firmware. 1 2 3 4 Click the “SYSTEM UPDATE” tab index. The “SYSTEM UPDATE” tab window will be displayed. Select a DVR in the “TARGET” window. The display color for the selected DVR will change to blue. Click [Browse..] (1 1). Reference files will be displayed in the dialog box.
/ !"#$%&'$%()**+ ,- CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4) ■ INFORMATION1 tab As well as displaying DVR setting information and hard disk-related information, this can be used to initialize the hard disk. Specify a DVR name in the DVR list in the “TARGET” window and then click , or double-click the DVR name. The information for the selected DVR will be loaded and displayed.
0 !"#$%&'$%()**+ ,- CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4) 8 INITIALIZE HDD This initializes the hard disks in the DVR. If you click , a confirmation dialog box will be displayed. Click [Yes] to continue with the hard disk initialization. • • • When a hard disk is initialized, all images that are stored on that hard disk will be erased.
1 !"#$%&'$%()**+ ,- CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4) ■ INFORMATION2 tab Shows information such as the DVR usage time, power outages and the firmware version. Specify a DVR name in the DVR list in the “TARGET” window and then click , or double-click the DVR name. The information for the selected DVR will be loaded and displayed. 1 4 2 3 1 DVR profile Shows the DVR name, attribute group, and DVR type.
!"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) The “MENU” window contains 7 tabs which are used to set the DVR operating conditions. Click the menu bar to display the setting window. in ● Basic flow of menu settings 1 Select a setting tab. Click the tab index to switch to the specified tab. 4 Click [APPLY] in the tab. The settings will saved in the editing table and the tab index will change to yellow.
MENU SETTINGS (MENU WINDOW) (User Level: ID4) 2 DAYLIGHT SAVING (Default setting: NO To change the default setting, use drop-down list boxes and spin buttons to change the [ON (time for switching to daylight saving time)] and [OFF (time for daylight saving time to end)] settings, and then click [APPLY]. USE) This sets daylight saving time and whether daylight saving is to be used or not.
. !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ REC MODE SET tab Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change to blue. 1 2 3 4 5 6 7 8 1 PICTURE QUALITY (Default setting: HIGH) 2 AUDIO RECORDING (Default setting: ON) This sets whether audio is to be recorded at the same time as images (when alarm recording is not in progress).
. !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) 3 OVERWRITE (Default setting: ON) ● Resuming recording that has been halted This sets what is to happen when the hard disk recording area becomes full. If “OVERWRITE” has been set to “OFF”, recording will stop automatically when the hard disk recording area becomes full and the “DISK FULL” criteria are met.
. !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) 5 ALARM MODE (Default setting: OFF) 7 ALARM SENSOR (Default setting: ALARM) This sets the recording mode for alarm recording. Make the selection from the drop-down list box and then click [APPLY]. This sets the operating conditions for alarm recording. Make the selection from the drop-down list box and then click [APPLY]. Available settings: • OFF: Alarm recording is not carried out.
.. !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ TIMER REC SET tab This sets the timer recording conditions for DVRs. Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change to blue. 1 2 3 4 1 WEEK 4 OVER 24H Select the day for timer recording to be carried out from the drop-down list box.
. !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) Example 1:To set timer recording to occur between 10:30 and 15:30 on Mondays Example 2:To set timer recording from 10:30 on Monday to 20:30 on Wednesday 1 1 2 3 4 5 6 Select “MON” from the “WEEK” drop-down list box. Use the [START] spin button to select [10:30]. Use the [STOP] spin button to select [15:30]. 2 Select “ON” in the “SET” box.
./ !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ HOLIDAY SET tab This window is used to specify particular days as holidays. The timer recording operation on specified holidays will be the same as that for Sundays. A holiday setting can be made for days such as festival and national holidays when the same level of security as for Sundays is required. 1 2 3 Click on the DVR to be set in the “TARGET” window to select it.
.0 !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ DISPLAY/BUZZER SET tab This is used to set the display information and buzzer operation for the monitor connected to the DVR. Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change to blue.
.1 !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) 2 BUZZER Select “ON” to set the warning buzzer to sound at the following times, or select “OFF” if you do not need the warning buzzer to sound, and then click [APPLY].
. !"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ MONITOR SET tab This sets the window settings for the monitor that is connected to a DVR. Select the DVR to be set from the “TARGET” window. The selected DVR will change to blue. 1 2 3 4 3 ALARM PRIORITY (Default setting: LAST) This sets the screen display order if multiple alarms occur at more than one channel.
. MENU SETTINGS (MENU WINDOW) (User Level: ID4) 4 MASK SET (Default setting: OFF) You can set the normal window and the playback window so that images from specified channels are not displayed. Set the window display to “ON” or “OFF” for each channel (CH1 to CH4) and then click [APPLY]. • • ON: Images and audio are masked. OFF: Images and audio are not masked. (The word “MASK” will be displayed on a black window.
!"#$%&'$%()**+ ,- MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ TITLE/MOTION SET tab This sets the motion sensor and camera title settings for each channel. Select the DVR in the “TARGET” window. The selected DVR will change to blue. 1 2 3 • 1 Specifying a channel Sensitivity (Default value: OFF) Select a channel for motion sensor or camera title setting. Select the sensitivity from the drop-down list box.
!"#$%&'$%()**+ ,- BROADCAST TRANSMISSION SETTINGS (User Level: ID3/4) (BROADCAST WINDOW) Basic commands can be transmitted from a single user terminal to all connected DVRs in a single operation. This is called “broadcasting”. Click on the toolbar to display the BROADCAST window. The operation permissions for this window vary depending on the command being used.
!"#$%&'$%()**+ ,- BROADCAST TRANSMISSION SETTINGS (BROADCAST WINDOW) (User Level: ID4) 4 CLOCK SET (User Level: ID4) This sets the date and time for all connected DVRs to the specified time. 1 Use the spin buttons to set the date (DATE [MM/DD/YY]) and time (TIME [hh/ mm/ss]). The date order will be according to the Windows environment settings. 2 Click . 5 SYSTEM UPDATE This broadcasts firmware data to all DVRs to update their firmware.
. !"#$%&'$%()**+ ,- IMAGE DISPLAY WINDOWS This system allows monitored live images and playback images to be viewed in the following three types of screen. ■ Display Screen Type 1 QUAD screen This is the main window for this system. This shows all of the camera images (channel 1 to channel 4) from all cameras that are connected to the specified DVR in a 4-screen split display. After logging in, this quad screen is displayed in the main window.
!"#$%&'$%()**+ ,- IMAGE DISPLAY WINDOWS ■ Switching Display Windows To switch the display window, click the window select button on the toolbar or use the switching operation described below.
/ !"#$%&'$%()**+ ,- IMAGE DISPLAY WINDOWS ■ Title Bar The title bars at the top of each window have two levels, for the DVR and for the cameras in order to show the relevant information for the images being displayed. In addition, you can specify a window in the multi screen by click the title bar for that window.
0 !"#$%&'$%()**+ ,- MONITORING LIVE IMAGES (User Level: ID1 or higher) Live images from monitoring cameras that are connected to the network can be viewed by specifying a DVR. In addition, the display window can also be selected as desired. ■ Monitoring with QUAD Screens Images from a single DVR (comprising 4 channels) can be viewed in a 4-screen split screen. 1 2 1 Click (1 1) on the toolbar. The quad screen is displayed.
1 !"#$%&'$%()**+ ,- MONITORING LIVE IMAGES (User Level: ID1 or higher) ■ Monitoring with MULTI Screens Live images from up to a maximum of 4 DVRs can be displayed at the same time in a single screen. 1 2 3 1 2 3 4 Click (1 1) on the toolbar. The multi screen is displayed. Select one screen from the four screens that are displayed, and then click the title bar (2 2). The title bar will change to blue.
!"#$%&'$%()**+ ,- MONITORING LIVE IMAGES (User Level: ID1 or higher) ■ Disconnecting DVRs To disconnect a DVR, click window. in the main When you do this, communication with the DVR that is being monitored (or the DVR that has been specified by clicking a title bar when monitoring in a multi screen) will stop and the screen will return to the status it was at before the connection.
!"#$%&'$%()**+ ,- RECORDING IMAGES Images that are being monitored can be recorded onto the hard disk inside the DVR. There are three recording modes that are available: “Normal recording” involves using manual operations to record live images that are being monitored; “Timer recording” lets you specify a time for recording to take place automatically; and “Alarm recording” automatically starts recording when an alarm such as an intruder is detected.
/ !"#$%&'$%()**+ ,- RECORDING IMAGES ● Normal recording from the multi screen Images from multiple DVRs can be recorded at the same time from the multi screen. The operations for each window are the same as for the quad screen. 1 2 3 4 Click (1 1) on the toolbar. The multi screen will be displayed. 1 Click the title bar (2 2) of the recording window. The title bar will change to blue. 2 Double-click a DVR in the “TARGET” window (3 3).
/ RECORDING IMAGES ■ Timer Recording (Setting recording conditions: User level ID4, Timer button operations: User level ID3 or ID4) This automatically starts recording at the time specified by the timer. 1 2 Use the “TIMER REC SET” tab window in the “MENU” window to set the timer recording conditions. (P.33) Click the timer button in the recording control panel.
/ !"#$%&'$%()**+ ,- RECORDING IMAGES ■ Alarm Recording (User Level: ID4) The following limitations apply to alarm recording operation. (1) Immediately after the recording operation starts (2) Immediately after the [PICTURE QUALITY] or [AUDIO RECORDING] menu setting has been changed and the display has returned to the camera window. For (1) and (2): • Alarm input will not be received for a maximum period of 4 seconds, but alarm input can be received after that.
/. !"#$%&'$%()**+ ,- PLAYING BACK RECORDED IMAGES (User Level: ID1 or higher) When playing back recorded images, click the playback button in live mode. Playback of images from the specified DVR will start. ■ Playing Back Recorded Images 1 3 Switches to live image mode. Live images from the DVR to be played back will be displayed in the window. At the multi screen, click the title bar to specify the DVR to be played back in the 4-screen display.
/ !"#$%&'$%()**+ ,- PLAYING BACK RECORDED IMAGES (User Level: ID1 or higher) ■ Functions of Each Playback Control Panel Component (Playback) button: (Slow play) button: This button is used to play back recorded images at normal speed. This button can be used to carry out slow playback after playback has been paused. The playback speed becomes slower each time the button is clicked.
// !"#$%&'$%()**+ ,- SEARCHING (User Level: ID2 or higher) Normal recording images, timer recording images and alarm recording images that have been recorded by a DVR can be searched through using the computer and played back. The following three search modes are available. ● Time/date search: (P.55) This lets you search all images on the DVR’s hard disk(s) randomly by specifying a recording date. ● Alarm search: (P.
/0 !"#$%&'$%()**+ ,- SEARCHING (User Level: ID2 or higher) ■ Alarm Search All alarm recordings made by the selected DVR are displayed in the alarm list in the “ALARM SEARCH” window. This method of searching lets you select alarms to be played back from the alarm list. 1 3 2 4 5 6 1 2 3 Click (1) on the toolbar. The “ALARM SEARCH” window will be displayed.
/1 SEARCHING 4 5 (User Level: ID2 or higher) Select the alarm to be played back from the alarm list. The selected alarm will change to blue. Click (5 5). A still image for the selected alarm will be displayed in the preview window. The display window will vary depending on the “Alarm List” tab selection. • ALL: Images for all channels are displayed in a 4-screen display. • CH1–CH4: Only the alarm detection channel is displayed in a large window.
/ !"#$%&'$%()**+ ,- SEARCHING (User Level: ID2 or higher) ■ Alarm Thumbnail Search All alarm recordings made by the selected DVR are displayed as thumbnail (compressed images) in the “ALARM SEARCH” window. This method of searching lets you select alarms to be played back by referring to the thumbnails. 1 3 2 6 1 2 7 4 5 4 Click (1 1) on the toolbar. The “ALARM SEARCH” window will be displayed.
/ SAVING STILL IMAGES !"#$%&'$%()**+ ,- (User Level: ID2 or higher) Still images that are displayed during playback can be saved on the computer’s hard disk in JPEG format. 1 2 3 4 Playing back images in the main window Select the DVR in the “TARGET” window and then click the play button in the playback control panel. Still playback at the image to be saved. Click the still button in the playback control panel. Click in the saving control panel.
0 DOWNLOAD !"#$%&'$%()**+ ,- (User Level: ID2/3 or higher) Recorded images can be downloaded to the computer or some other device. Download operation permissions for user levels 2 and 3 will be set to the default settings. ■ Specifying the Image Range Follow the procedure below to specify the range of images to be downloaded, and then change to the download window. 1 2 Display the live images for the DVR to downloaded from in the main window.
0 !"#$%&'$%()**+ ,- DOWNLOAD (User Level: ID2/3 or higher) ■ Functions of Each Download Window Element Display area 2 3 1 6 7 4 8 5 9 I F G H Image range setting area Basic operation area Preset list operation area 1 Preview window This shows thumbnail images of the still images at the start point (left) and end point (right) for the specified image files.
0 !"#$%&'$%()**+ ,- DOWNLOAD (User Level: ID2/3 or higher) The following commands can be used on the currently-selected image file. 9 Download preset list This lists the image files that have been preset for downloading using the [ADD] button. 4 FILENAME This sets the path for the download destination and the filename. Normally the settings that are assigned automatically should be used.
0. !"#$%&'$%()**+ ,- DOWNLOAD (User Level: ID2/3 or higher) ■ Basic Downloading Operations (Individual Download) When the download window is displayed, continue the download operations by following the procedure given below. 3 1 4 1 2 5 6 2 Specify the download destination and the filename. The download destination path and the filename are assigned automatically.
0 DOWNLOAD 4 !"#$%&'$%()**+ ,- (User Level: ID2/3 or higher) If you would like to download the file individually without presetting it, click (4 4) in the basic operation area. The specified image file will then be downloaded immediately. While the download is in progress, a dialog box containing a download progress bar will be displayed so that you can check the progress of the download and other necessary information. a c d b e a.
0/ !"#$%&'$%()**+ ,- DOWNLOAD (User Level: ID2/3 or higher) ■ Preset List Operations (Batch Downloads) Image files that have been registered using the button in the basic operation area are added in order to the download preset list. (Up to a maximum of 20 files can be preset at any time.) The image files that have been added to the preset list can all be downloaded at the same time.
!""# $ TIMER DOWNLOAD (User Level: ID2/3 or higher) A timer reservation can be used to automatically download images recorded by a DVR. If you specify the download range (starting point and ending point) for each DVR, the recorded images from the specified range will be downloaded automatically at the specified time Click on the toolbar to display the “TIMER DOWNLOAD” window.
01 !"#$%&'$%()**+ ,- TIMER DOWNLOAD (User Level: ID2/3 or higher) 7 STATUS F Operation buttons Shows the latest download results or the current status. • • • • OK: Download successful • : Cancels all current downloads and reserved downloads. • : Cancels a timer setting and returns the setting to the point before [APPLY] was clicked.
0 !"#$%&'$%()**+ ,- TIMER DOWNLOAD ● (User Level: ID2/3 or higher) Timer download procedure Set the timer download settings as follows. 1 2 • Set the download starting time. Use [SCHEDULE] to set the weekday and time for starting the download. Specify the DVR to be downloaded from. With [SELECT] against [DVR NAME] selected, double-click the DVR name in the “TARGET” window. The DVR name will be displayed in [DVR NAME].
0 TIMER DOWNLOAD 4 (User Level: ID2/3 or higher) Specify the download destination folder. The download destination path and the filename are assigned automatically. The default name setting that appears in the “FOLDER PATH” box does not need to be changed unless you prefer to use different settings. If you would like to change the download destination or the filename, click [Browse..] and type in the new settings in the “Browse for Folder” dialog box.
1 !"#$%&'$%()**+ ,- TIMER DOWNLOAD (User Level: ID2/3 or higher) ● Image range setting for downloading • When setting the image range, the end point time (TO TIME) should be later than the start point time (FROM TIME). If the start point time is later than the end point time, an error message will be displayed when you click [APPLY]. • If the end point time is set to “00:00”, it will mean “midnight the following day”.
1 !"#$%&'$%()**+ ,- TIMER DOWNLOAD ● (User Level: ID2/3 or higher) Timer download setting example 1 2 3 1 Images that were recorded every Sunday between 1:00 to 10:00 will be downloaded the following day (Monday) at 12:00.
1 !"#$%&'$%()**+ ,- TIMER DOWNLOAD ● (User Level: ID2/3 or higher) Basic timer download operation and specifications • When the download start time specified in [SCHEDULE] is reached, the downloads will be carried out in order starting from no. 1. • Timer downloads require images to have been recorded during the image recording time specified. • Example: DVR-1_20030623_1500.
1. !"#$%&'$%()**+ ,- TIMER DOWNLOAD ● (User Level: ID2/3 or higher) Download Log If you click on “STATUS” in the “TIMER DOWNLOAD” window, the download log will be displayed, and you can then check the download history details for each DVR.
1 !"#$%&'$%()**+ ,- TAMPER DETECTION (User Level: ID2 higher) This function lets you check whether images that have been downloaded from a DVR to an external storage device are the original downloaded images, or whether they have been modified or added to in some way. Click on in the toolbar to display the “TAMPER DETECTION” window. 1 2 Enter the filename of the file to be checked in the “FILENAME” box.
1/ !"#$%&'$%()**+ ,- MP2 Viewer The MP2 Viewer is a special playback software application that is used for the DSR-M804/800 series. It can be used to play back image data in MPEG2 format that has been saved from the DVR onto a recording medium such as and computer’s hard disk drive, a CompactFlash card or a CD-R. ■ Main Functions ■ Operating Environment 1. Plays back saved images data (sound cannot be played back).
10 !"#$%&'$%()**+ ,- MP2 Viewer ■ Window Structure and Functions of Each Part The MP2 Viewer window structure and control menus are as follows. 1 2 3 4 5 9 6 7 8 1 File menu • • • • • 3 Language selection Exit: Exits the program. (Default setting: English) This lets you select the screen display language. Select the check mark to the left of the language that you would like to use for displays. About: Version display.
11 !"#$%&'$%()**+ ,- MP2 Viewer 4 Toolbar 7 Title bar This contains command buttons that are used most frequently. You can carry out the following operations by clicking these buttons. Shows information for the displayed image.
1 !"#$%&'$%()**+ ,- MP2 Viewer ■ Opening Files ■ Playback Control After MP2 Viewer opens, follow the procedure below to open the image file to be played back. Use the toolbar command buttons for playback operations. 1 2 Click on the toolbar. Alternatively, select [Open(O)] from the File menu. 1 Select and open the image file. Select the file in the Open dialog box and then click [Open]. The file will open and playback will start automatically.
1 !"#$%&'$%()**+ ,- MP2 Viewer ■ Saves a Still Image ■ Prints Still Images Still image data can be saved in JPEG format onto a different storage medium. Still images can be printed. 1 2 1 Displays a still image. Click while playback is in progress. 2 Click on the toolbar. Alternatively, select [Save As(A)] from the File menu. Displays a still image. Click while playback is in progress. Click on the toolbar.
!"#$%&'$%()**+ ,- MP2 Viewer ■ Searches for Images ■ Detecting Tampering of Images You can specify a date and time within the image file range to search for images. You can check saved images while they are being played back to verify if they have been tampered with or not. 1 Specify the date and time for the images to search for. Use the spin buttons on the search panel to specify the date and time. 1 Start the tamper detection function.
Printed on recycled paper 1AC6P1P2746-B L9EAE/WA (0204KP-SY) !"#$%&'$%()**+ ,- SANYO Electric Co., Ltd.