Operation Manual

REFERENCE
33
Troubleshooting (Continued)
Symptom
Some channels are
skipped over when
using
CH/TRK (v/V)
Picture and sound of
broadcasting channel
are weak or missing.
Camcorder image is not
shown.
Camcorder image via
A/V input to DVD+VCR
is not shown on TV
screen.
Timer recording is not
possible.
indicator
appears
after DVD+VCR is turned
off.
The “PROGRESSIVE
SCAN MODE” message
remains to be
displayed.
The HiFi-videotape
cannot be played back
in stereo.
Cause
 Those channels were deleted with the
CH. ADD/DEL option.
 Antenna or cables are loose.
 Wrong TUNING BAND option is being
used.
 Camcorder is off.
 DVD+VCR SOURCE SELECT is not set
to LINE1 or LINE2.
 Clock in DVD+VCR is not set to correct
time.
 Timer has been programmed
incorrectly.
 indicator does not appear after pro-
gramming timer.
 DVD+VCR is in Timer Recording mode.
 DVD+VCR was turned off while setting
the Progressive scan mode.
 This unit can play back videotape
recorded in stereo, but the playback
sound turns to be monaural.
Correction
 Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 15.
 Tighten connections or replace cable.
 Try all TUNING BAND options. See
“Channel Selection” on page 15 for
details.
 Turn camcorder on and operate
properly.
 Press INPUT to select LINE input chan-
nel (LINE1 or LINE2).
 Set clock to correct time. See “Setting
the Clock” on page 16.
 Reprogram Timer. See “Timer
Recording” on pages 22 and 23.
 Reprogram Timer.
 This is the normal indication that the
DVD+VCR is in TIMER mode.
 Keep pressing the STOP button for
more than 5 seconds.
_____________
Moisture Condensation
Moisture condensation can occur:
• When the DVD+VCR is moved from a cold place to a
warm place.
• Under extremely humid conditions.
In locations where moisture condensation may occur:
•
Keep the DVD+VCR plugged into an AC power outlet
with POWER On. This will help prevent condensation.
• When condensation has occurred, wait a few hours
for the DVD+VCR to dry before using it.