User's Manual

Connecttheprojector’sACpowercordintoanAC
outlet.ThePOWERindicatorturnsred.Openthelens
cover.
PressthePOWERON/STAND-BYbuttononthe
remotecontrol.ThePOWERindicatorbecomesgreen
andthecoolingfansstarttooperate.Thepreparation
displayappearsonthescreenandthecountdown
starts.
2
3
1
Thepreparationdisplaydisappearsafter30seconds.
4
Afterthecountdown,theinputsourcethatwas
selectedthelasttimeandtheLampcontrolstatusicon
(seepage46)willappearonthescreen.
IftheprojectorislockedwithaPINcode,aPINcode
InputDialogBoxappears.EnterthePINcodeas
instructedbelow.
Seepage46fortheLampcontrol.
Video
Selected Input Source and Lamp Control
Completeperipheralconnections(withacomputer,
VCR,etc.)beforeturningontheprojector.
Lampcontrolstatus
OK
AftertheOKicon
disappears,youcan
operatetheprojector.
PIN Code Input Dialo� Box
Turnin� On the Projector
Enter a PIN code
SelectanumberbypressingthePoint▲▼buttons,and
thenpressthePoint►buttontofixthenumberandmove
thepointer.Thenumberchangesto"".Ifyoufixedan
incorrectnumber,movethepointertothenumberyouwant
tocorrectbypressingthePoint►button,andthenselect
thecorrectnumberbypressingthePoint▲▼buttons.
Repeatthissteptocompleteenteringafour-digitnumber.
"1234"issetastheinitialPINcodeatthefactory.
Afterenteringthefour-digitnumber,movethepointerto
"Set"bypressingthePoint►button.PresstheSELECT
buttonsothatyoucanstarttooperatetheprojector.
IfyouenteredanincorrectPINcode,"PINcode"andthe
number()turnsred.EnterthecorrectPINcodeall
overagain.
What is PIN code?
PIN(PersonalIdentificationNumber)codeisasecuritycode
thatallowsthepersonwhoknowsittooperatetheprojector.
SettingthePINcodepreventsunauthorizeduseofthe
projector.
APINcodeconsistsofafour-digitnumber.RefertothePIN
codelockfunctionintheSettingMenuonpages47–48for
lockingoperationoftheprojectorwithyourPINcode.
Note:
•WhentheInputSearchfunctionisseton
On1orOn2,theinputsignalwillbesearched
automatically(p.44).
•WhentheLogoselectfunctionis"Off,”the
logowillnotbedisplayedonthescreen
(p.42).
•Whenthe"Countdownoff"or"Off"isselected
intheDisplayfunction,thecountdownwillnot
beshownonthescreen(p.41).
•Duringthecountdownperiod,alloperations
areinvalid.
•IfthePINcodenumberisnotenteredwithin
threeminutesafterthePINcodedialogbox
appeared,theprojectorwillbeturnedoff
automatically.
•The“1234”issetastheinitialPINcodeatthe
factory.
CAUTION ON HANDLING THE PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting a
newPIN code;write downthe numberin acolumn
on page 67 of this manual and keep it on hand.
ShouldthePINcodebemissingorforgotten,consult
yourdealerorservicecenter.
18
PIN code
PIN code
Basic Operation
16
Note:
TheFilterwarningandLampreplacement
iconsmayappearonthescreendependingon
theusagestateoftheprojector.