Instruction manual
GB-36
Automatically dividing a file at a silent pause (line input only)
When a recording is made with external equipment connected, if there is a silent
pause for two seconds or more in playback sound at the source, recording stops
automatically. When any sound is produced, recording restarts as another file.
1
Turn on this unit and press and hold down the [ ] button for
two seconds or more in the stop state.
2
When " " is displayed, press the [ ] or [ ] button to select
"
" and press the [ (play)] button.
" " is displayed at the lower left of screen.
3
Start recording from an external source. (See Page 20)
During temporary stop due to a silent pause, " " blinks.
Note
When the " " folder has been selected, " " is displayed. In this case,
press the [
(fast-reverse)] or [ (fast-forward)] button and then
conduct the operation above.
Note - If a silent pause continues more than 15 seconds, recording stops automatically.
- This setting remains even if the power is turned off.
Setting is now complete.
gap]vkjcb]cl,glbb14 .6,//,061801805N
K