User Guide

Phone Basics
2A. Phone Basics 19
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Press to display “+” on your phone screen.
2. Dial the country code and phone number you’re calling, and
press . The access code for international dialing will
automatically be dialed, followed by the country code and
phone number.
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone
number beforehand. See “Assigning Speed Dial Numbers” on
page 48.
To use speed dial for locations 2-9:
䊳 From standby mode, press and hold the appropriate key for
approximately two seconds.
To use speed dial for locations 10-99:
䊳 From standby mode, press appropriate keys, and then press
.
The display confirms that the number has been dialed when it
shows “Connecting...”
Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use either
of the following abbreviated dialing features.
䢇 Contacts Match – Retrieve any number saved in your Contacts
by entering only the last three to six digits of the number.
䢇 Prepend – Prepend the first five or six digits (for example, the
area code and prefix) to any four or five digits you enter.
To activate the Contacts Match feature:
1. Press > Settings/Tools > Settings > More... > Call Setup .
2. Select Contacts Match > On .
To activate the Prepend feature:
1. Press > Settings/Tools > Settings > More... > Call Setup >
Abbreviated Dialing .
2. Select Prepend > On .
3. Enter a five- or six-digit number and press .
Note
When you’re calling from the United States, dial “011,” then the
country code and phone number.