Ultra-Low Temperature V.I.P.
The ultra-low temperature freezer VIP series lineup meets diversifying needs for ultra-low temperature storage, including storage of large quantities of biological genetic material, quality control, environmental consciousness, etc. SANYO VIP series ultra-low temperature freezers with patented vacuum insulation cabinet construction, microprocessor controls and high-performance refrigeration achieve the most efficient storage capacity in the industry. Unit: mm (inch) Width 765 (30.1”) 1730 (68.
The history of SANYO Ultra-Low Temperature Freezers, which constantly push the limits of ever more advanced refrigerating/freezing technology, closely follows the history of biotechnology.
Construction Safety Patented VIP insulation technologies Alarms SANYO pioneered a revolutionary vacuum insulation cabinet construction that reduces the wall thickness to approximately one half and achieves up to 30% more storage capacity than a conventionally insulated freezer without increasing the footprint. VIP Insulation maximises storage capacity when space is limited. When using multiple units, large amounts of space can be saved compared to Structural conventionally insulated freezers.
Upright freezers Chest freezer MDF-U32V/U53V/U73V MDF-C2156VAN Offers maximum storage volume in the least footprint for cryogenic preservation Using ultra-low temperature freezer storage for long-term preservation of valuable specimens eliminates worries of contamination, reduces running costs, and enables longterm storage at ultra-low temperatures far below the recrystallization point. Provides large capacity in a limited space and helps to meet constantly increasing sample storage needs.
Performance Data Specifications Pull-down characteristics Pull-up characteristics during power failure LN2 backup system operation characteristics Model Temperature range CO2 backup system operation characteristics Maximum cooling performance Central air temp. in cabinet Ambient temp. 30°C, No-load Ambient temp. and maintenance of –135°C by injection of LN2 (50kg) Time (hours) Temperature (˚C) 25 0 2 4 6 8 20 15 10 20 30 760 x 495 x 615 mm (29.9” x 19.5” x 24.2”) 405 x 490 x 425 mm (15.
