TO THE OWNER Before operating this Plasma Monitor, read this manual thoroughly and operate the Plasma Monitor properly. This Plasma Monitor provides many convenient features and functions. Operating the Plasma Monitor properly sables you to manage those features and maintains it in better condition for a considerable time Improper operation may result in not only shortening the product-life. but also malfunctions, fire hazard. or other accidents.
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this Plasma Monitor from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Clean only with dry cloth. Follow all wakings and instructions marked on the Plasma Monitor.
COMPLIANCE European Norm Compatibility / CE This machine is provided with the CE-mark and therewith corresponding to the arms that are valid for its operation at present. Thus the effective guidelines on the electromagnetic compatibility 89/336/EWG and safety regulations according to low voltage guideline 73/23/EWG and 93/68/EWG are guaranteed. Mutual disturbances with other electronic appliances are normally excluded, if those also are in accordance with valid norms.
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER MODE 28 SELECTING INPUT SOURCE 28 SELECTING COMPUTER SYSTEM 28 PREPARATION 7 PC ADJUSTMENT 29 NAME OF EACH PART OF PLASMA MONITOR 7 SETTING-UP PLASMA MONITOR 9 VIDEO MODE 32 SELECTING INPUT SOURCE 32 SELECTING VIDEO SYSTEM 33 CONNECTING PLASMA MONITOR 11 TERMINALS OF PLASMA MONITOR 1 CONNECTING TO VIDEO EQUIPMENT 13 SETTING 34 CONNECTING TO COMPONENT VIDEO EQUIPMENT 14 CONNECTING TO COMPUTER 15 SCREEN SAVER FUNCTION 34 SETTING MENU 35 CLEANING THE PLASMA MONI
FEATURES AND DESIGN This Plasma Monitor is designed with the most advanced technology. The Plasma Monitor utilizes built-in multimedia features, a palette of 16.77 million colors, and Plasma Display Panel technology, + High Definition Plasma Panel # [nut Terminals This Plasma Monitor has 852 x 1.024 dots High Definition Plasma Display Panel.
PREPARATION NAME OF EACH PART OF PLASMA MONITOR FRONT PLASMA DISPLAY FRONT CONTROLS AND INDICATORS MENU BUTTON CURSOR 4> BUTTON FRONT CONTROLS Used to select MENU Used to set and adjust the operation, (P18} menu data on On-Screen Menu. (P18} Ll gt Used to execute the selected menu on On Screen Menu. (P18) CURSOR YA BUTTON Used to select the menu on On-Serene Menu. {P18) MENU INPUT = VOLUME Used to adjust volume. (P27) Used to turn Plasma Monitor on or off.
PREPARATION AME OF EACH PART OF PLASMA MONITOR BACK [koala R [ ¥ 71N This Plasma Monitor detects internal temperature and automatically controls operating power of Cooling Fans. LA AND CONNECTORS (SIDE) (Refer to page 11) SPEAKER OUTPUT TERMINALS (LEFT) TERMINALS AND CONNECTORS {(BACK) SPEAKER OUTPUT FiE: TR (RIGHT) {Refer to page 12) POWER CORD CONNECTOR NOTES ON USING PLASMA MONITOR For using this Plasma Monitor, Optional Stand or Mounting Bracket is needed.
PREPARATION SETTING-UP PLASMA MONITOR CONNECTING AC POWER CORD This Plasma Monitor uses nominal input voltages of 100120V or 200-240 V AC. The Plasma Monitor automatically selects the correct input voltage. 1t is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock. do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use.
PREPARATION INSTALLATION OF OPTIONAL SPEAKERS AND STAND Please read the each option’s instruction manual (or installation manual) for the installation, | /N caution IN INSTALLATION | | ®Through installation work, handling with more than two people is recommended. ® When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not handle it by holding the attached accessory parts (the Speakers), otherwise damage could be result. ® Provide space that enough forger than the screen size.
CONNECTING PLASMA MONITOR TERMINALS OF PLASMA MONITOR This Plasma Monitor has INPUT TERMINALS and OUTPUT TERMINALS on its side and back, for connecting computers and video equipment. Refer to the figure on pages 13 1o 15 and connect properly. SIDE L When controlling this Plasma Monitor by computer, connect your computer to this terminal. WIRED RIC WIRED R/C JACK When using Remote Control Unit as @ Wired Remote Control, Connect Re mate Control Unit to this jack with Remote Control Cable (supplied).
CONNECTING PLASMA MONITOR BACK fmj Connect video and audio outputs from LR eVl idea equipment. (Refer 10 P13 Connect computer outputs to this terminals.
CONNECTING PLASMA MONITOR CONNECTING TO VIDEO EQUIPMENT NOTE : Models PD P-32H1ENV and PD P-32H1AN only. Cables used for connection ( «21-PIN Video Cable (RCA x 8) * Video Cable (RCA x 1) = Video Cable {RCA x 3} + S-VIDEO Cable * Audio Cable (ROA x 2) Cables are not supplied with this Plasma Monitor.) NOTE When connecting Plasma Monitor, AC Power | Cords vf both Plasma Monitor and external | equipment should be disconnected from AC outlet.
CONNECTING PLASMA MONITOR CONNECTING TO COMPONENT NOTE : Models PD P-32H1ENV and PD P-32H1AN only. Cables used for connection (Cables are not supplied with this Plasma Mirror) « Video Gable (RCA x 3} or (BNC x 3} NOTE * Audio Cable (RCA 2} A When connecting Plasma Monitor. AC Power Lords of both Plasma Mo niter and external impermanent Journo d be disconnected from AC outlet. | VIDEO EQUIPMENT Component video output equipment. {such as DVD payer or DV player high-definition TV source.
BEFORE OPERATION OPERATION OF REMOTE CONTROL Remote Control Unit can be used as either Wired or Wireless. WIRED REMOTE JACK When using as Wired Remote Control, connect Remote Central Cable 1o this jack, (P17} VIDEO BUTTON Used to select video inputs "AV 17 and "AV 27, (P22) R e e Used 1o select COMPONENT h VIDEO input. (P22} POWER ON-OFF BUTTON Used to turn Plasma Monitor on or off. (P20) VIDEO COUNTERSUNK ON-OFT Used to adjust volume.
BEFORE OPERATION WIRED REMOTE CONTROL OPERATION When using this Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to R/C JACK with Remote Control Cable (supplied). Batteries installation is required when using as Wired Remote Control Unit. Remote Control Cable (supplied) REMOTE CONTROL BATTERIES INSTALLATION 1 Remove the battery 2 Slide 2 batteries into 3 Replace the compartment the compartment. lid. compartment fid.
BEFORE OPERATION OPERATING ON-SCREEN MEN You can control and adjust this Plasma Monitor through ON-SCREEN MENU. Refer to the fallowing pages 1o operate each adjustment on ON-SCREEN MENU. BUTTONS OF ON-SCREEN MENU OPERATION REMOTE CONTROL UNIT WIDE cFFTMSR | &5 5 Used to select DIURETIC MOVE UP ROUTE 5D & the item to adjust MENU | Used to sel or ; Used to execute the selected I menu. adjust the menu ey il data. Dower Used to display ON-SCREEN MENU, Used to close ON-SCREEN MENU.
BEFORE OPERATION MENU LIST AY MENU * Select oK : Return STATUS T 0K o Exit j MENU Returnables : Exit [T AY: Select <« P Adjust MENU _:Return STATUS :Exit Color AY: Select MENU Return STATUS Ext MENU {Return STATUS: Exi! MENU + Return* STATUS Ext AY. Adjust MENU " .Return "STATUS 7 Bt I Horizontal 0_» AY . Select 4P August MENU.
BASIC OPERATION TURNING ON / OFF PLASMA MONITOR I Complete the peripheral connections (with Computer, VCR. etc) before turning on Plasma Monitor. (Refer to "CONNECTING PLASMA MONITOR' on Pages 13~15 for connecting that equipment } 2 Connect the Plasma Monitor's AC Power Cord into an AC outset . |3 Crass MAIN ON/OFF switch on Front Control of Plasma Monitor to turn ON. POWER indicator will light up{green) when Plasma Monitor is ON. Press MAIN ON/QFF switch again to turn OFF.
BASIC OPERATION WHEN USE MULTIPLE MONITORS When you use multiple Plasma Monitors, you can use POWER ON button and POWER OFF bunion cn Remote Control Unit instead of the POWER ON-OFF button. Press POWER ON button 1o turn Plasma Monitor ON so as not to affect another Plasma Monitor which may be already turned ON. Press POWER OFF button to turn Plasma Monitor OFF {standby mode} so as not to affect another Plasma Monitor which may be already turned OFF {standby mode) .
BASIC OPERATION mommy (e NV steel] (e VIDEO INPUT Elect either "AV1 (VIDEO" or "AVZ (VIDEO" by pressing VIDEO bunion on Remote Control Unit. {Refer to "CONNECTING TO VIDEO EQUIPMENT" on Page 13} COMPONENT INPUT Select “Component” by pressing COMPONENT button on Remote Control Unit (Refer to "CONNECTING TO COMPONENT VICED EQUIPMENT" on Page 14.) PC/RGB INPUT Select "PC", "BERG" or "BERG" by pressing PURGER button on Remote Control Unit. (Refer o "CONNECTING TO COMPUTER" on Page 15.
BASIC OPERATION PICTURE IMAGE LEVEL SELECT IN VIDEO/COMPONENT MODE Select image level among Dynamic, Natural, Cinema and Memory by pressing PICTURE button on the Remote Control Unit. Dynamic High contrast picture level preset on this Plasma Monitor Natural t Norma! picture level preset on this Plasma Monitor. Cinema ¥ Picture level adjusted for the picture with fine tone.
BASIC OPERATION IMAGE LEVEL ADJUST ME ] Press MENU button and ON-SCREEN MENU will appear, Crass YA buttons to select the item that you want fo adjust and then press OK button. The level of selected item is displayed. 3 Adjust each love by pressing 4% buttons. NOTE : @Sharpness cannot be adjusted when the input mode is "PC" or "BERG" except 4801, 575! and 1080i. ®The adjusted Video and Compiler matters are memorized individually. Press 4 button to decrease contrast, and ™ button to increase contrast.
BASIC OPERATION DE SCREEN OPERATIONS With this function, you can select screen size. SELECTING WIDE MODE Select screen size among "Natural wide'. "Zoom", "Captiousness, "Full” and "Normal" by pressing WIDE button on the Remote Control Unit. wi mutton VIDEO COMPONENT ON-OFF % mode cannot be selected at "PC° or "BERG" input mode. VOLUME PURGE VOLUME WIDE e ”ore ENE button PICTURE MOVE MUTE Ces O Natural wide Provides image to fit width of screen by expanding both sides of image.
BASIC OPERATION UP/DOWN PICTURE To move up/down the image vertically, press the MOVE UP / MOVE DOWN buttes. NOTE © Downpour picture function can work only when the input signal mode is "AV1 (VIDEOTEX, "Ave (VIDEO" and "Component”. ®Up/down picture function can work only when the image mods is “Natural wide”. "Zoom® and ADJUSTING WIDE IMAGE I Crass MENU butter and ON-SCREEN MENU will appear. 2 Press YA buttons to select “Serene adjust” menu and then press OK button. "Screen Stadium” menu will appear.
BASIC OPERATION SOUND ADJUSTMENT VOLUME Press VOLUME buttons} on Emote Control Unit or Front Control o adjust velum. Volume dialog box appears on the screen for & few seconds. button fo increase volume, and button decreasing MUTE Press MUTE glutton on Remote Control Unit to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume button(s). SOUND ADJUSTMENT Press MENU bunion and ON-SCREEN MENU will appear.
COMPUTER MODE SELECTING INPUT SOURCE REMOTE CONTROL OPERATION PC Select "PC" or "BERG" by pressing PC/RGB button on Remote Control * Unit. ROBT ¥ FRONT CONTROL OPERATION BERG Select “PC" or "GEORGE" by pressing INPUT button on Front Control. NOTE : "BERG" is used for RGB Video signals from 21-PIN connector.
COMPUTER MODE [ DIV PC MODE ADJUSTMENT “PC mode adjustment” menu is provided to adjust "Auto setup”. "Clock", "Phase”, "Position”. "Power save” and "Information” to conform to your computer. These function can be operated as follows. ] Press MENU button and ON-SCREEN MENU will appear. “BC mode adjustment” MENU 2 Press YA buttons to select "PC mode adjustment” menu and then press OK bunion. "PC mode adjustment” menu will appear.
COMPUTER MODE LORN Enable or disable Power save function. Enable Prows save by choosing "Yes” with <» buttons. NOTE ®The Power save function automatically reduces the Plasma Monitor's power consumption if the computer is not operated for a certain period of time. This function can be used when using the Plasma Monitor with a computer conforming to the VASE DIMS standard, ®To activate power save, computer setup is also needed. (Refer to Computer Operation manual.
COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS Basically this Plasma Monitor can accept the signal farm ail computers with the V. H-Frequency mentioned below and less than 100 MHz of Dot Clack 570 | meson VGA 640x480 3147 | 50.88 T VGA 640 x 400 3147 | 7009 VGA 640 x 480 37.86 | 7438 “VGA 640 x 480 3786 | 7281 CLIMACTIC 640 x 480 3497 | 66.60 640 x 480 3500 | 6667 15.625 15.734 800600 3516 800x 600 3788 800X 600 . 46.88 800 x 600 5367 800X 600 | 48.08 800X 600 87.90 800 x 600 34.
VIDEO MODE ELECTING IN VIDEO INPUT Select either "AV1 (VIDEO" or "AV2 (VIDEO" by pressing DIVED butter: on Remote Control Unit. (LR=1elY i]e When the connection of 21-PIN video signals is on, "BERG" should be selected by pressing PC/RGB button on Remote Control Unit, COMPONENT INPUT Select "Component” by pressing COMPONENT button on Remote Control Unit FRONT CONTROL. OPERATION Select "AVT (VIDEOTEX, "AV2 (VIDEOTEX, "BERG" or "Component” by pressing INPUT button on Front Controls.
VIDEO MODE SELECTING VIDEO SYSTEM VIDEO JACK OR S-VIDEO JACK Crass MENU button and ON-SCREEN MENU will appear. N F Press YA buttons io select "Setup menu” and then press OK button. "Setup menu® will appear. w Press YA buttons to select "Carol system™ 4 Press 4P buttons and select Color system. Plasma Monitor automatically detects incoming Color system, and adjusts itself to optimize its performance. Plasma Monitor cannot reproduce proper video image.
SETTING SCREEN SAVER FUNCTION Displaying a stifle picture {non-movement} on the screen for a long time cause a booming image on the screen. To neutralize the remaining image, Screen Saver function {3 mods) is provided in the Monitor. Use the function conveniently. W W N SELECTING SCREEN SAVER Press MENU bunion and ON-SCREEN MENU will appear Press YA buttons o select "Setup menu® and then press OK button. "Setup menu” will appear Press VA buttons to select "Screen saver” and then press > buttons.
SETTING SETTING MENU Press MENU button and ON-SCREEN MENU will appear. b M Press Y4 bunions to select “Setup menu” and then press OK bunion. "Setup menu® will appear. w Press YA buttons to select the item that you want to setup. and setup the selected item by pressing 4» buttons. Select language by pressing 4® buttons among English, French, German. Dalian, Spanish, Chinese and Japanese. Color system Refer to "SELECTING VIDEO SYSTEM". {P33) e Refer to "SCREEN SAVER FUNCTION".
SETTING Color temperature This function is used for selecting color temperature. Select "Normal®, ‘Cool® or ‘Warm® with 4™ bunions which you wish to select. No operation shut off timer This function turns off Plasma Monitor's power automatically. when thees is no operation of Remote Control or Front Control far 3 hours. When "On® mode selected.
APPENDIX pile VI ust e leg ] Be fare calling your dealer or service center for assistance. check the matters below once again 1. Make sure you have connected Plasma Monitor to your equipment as described in the section ‘CONNECTING PLASMA MONITOR" on pages Check cable connection. Verify that all computer, video and power cords are properly connected. 3. Verify that all power is switched on. 4. 1 Plasma Monitor still does not produce an image, re-start the computer. 5.
APPENDIX Problem: Try these Solution . There are tiny black # There may be some tiny black points and/or bright points on PDP (Plasma Display points and/or bright Panel). These points are normal points on the PDP. The POWER @ The Plasma Monitor has bauble, and Sell Diagnose function activates. | indicator is flashing. (Regor to P39) {No power) WARNING : High voltages are used to operate this Plasma Monitor. Do not attempt to open the cabinet.
APPENDIX INTERNAL TEMPERATURE MONITOR This function activates due to the temperature inside Plasma Monitor. When the temperature inside Plasma Mentor exceeds the normal, after displaying a message, Plasma Monitor will be turned off automatically. When the message “Warning! Internal temperature is too high." is displayed. When this message Is displayed, the internal temperature of Plasma monitor exceeds normal. After displaying this message for 10 seconds. Plasma Monitor will be muted off automatically.
APPENDIX TECHNICAL SPECIFIC Screen Diagonal Product name Panel type Display area Resolution / Color Viewing Angle Color System PC Interface Capability Plug & Play Power Management Audio Amp Terminals ACING VIDEO IN# VIDEO IN* COMPONENT IN % PIN RS2326 IN WIRED RC IN MONITOR OUT * HEADPHONE QUT EXT.
APPENDIX MEASUREMENT (32.8) 829 ] TER The products listed below are optionally supplied. When ordering these products, give name and Type No. to sales dealer. Speaker unit KA-8X-32H (R and L) Table top stand KA-TD-H108 Floor stand KA-TD-H10W Side rack KA-TD-R100 Tilt mount unit KA-TI-H10 Wall mount unit KA-WA-H10WV Ceiling mount unit KA-CH-H10 OPTIONS 517 (20.4) Size in mm (inky This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc.
APPENDIX RS232C TERMINAL Terminal : HUBBY-PIN Connect the serial port of computer to this terminal with Serial Cross Cable {not supposed. Pin Configuration INTERFACE COMMAND EXAMPLE : POWER ON {C00) 1 | no Connect 8 DSR 2 RxD 7 | No Connect T3 TxD 8 | No Connect 4 DTR{5YV) 9 No Connect 5 | Ground I Protocol Boater 9600 bps.
APPENDIX CONFIGURATIONS OF PC TERMINALS PIN (D-SUB) TERMINAL Terminal : HDB15-PIN Connect the display output terminal of computer to this terminal with VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required Pin Configuration 1 | Red input 9 | Ne Connect 2 | Green Input 10 Ground covertness) 3| Blue input 11 Sense 0 4 Sense 2 12 Sensed _5 Ground [Horizon) | 13] Horizon, sync 6 | Ground (Fled) 14, Vert.