Projector User Manual

Part Names and Functions
Remote Control
!6
@2
!2
i
!7
u
o
q ON/STAND-BY button
Turn the projector on or off (pp.20, 21).
!9 VIDEO button
Select VIDEO input source (pp.26, 37).
@1 COMPUTER 1 button
Select Computer 1 input source (pp.26, 27, 38).
!7 MENU button
Open or close the On-Screen Menu (p.22).
!1
!4 D.ZOOM ed buttons
Zoom in and out the images (pp.26, 36).
e AUTO PC button
Automatically adjust the computer image to its optimum setting
(pp.26, 29).
u IMAGE button
Select the image level (pp.26, 32, 40).
!2 FREEZE button
Freeze the picture (p.25).
o MUTE button
Mute the sound (p.25).
i P-TIMER button
Operate the P-timer function (p.26).
!1 NO SHOW button
Temporarily turn off the image on the screen (p.26).
r KEYSTONE button
Correct the keystone distortion (pp.24, 45).
!6 Point ed 7 8 buttons
– Select an item or adjust the value in the On-Screen Menu (p.22).
– Pan the image in Digital zoom + mode (p.36).
!5 SELECT button
– Execute the selected item (p.22).
– Expand or compress the image in Digital zoom mode. (p.36).
q@3
!5
!8
r
!0
!0 LAMP CONTROL button
Select the lamp mode (pp.26, 51).
✔Note:
To ensure safe operation, observe the
following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, spray, or any
other chemicals.
12
t
y CEILING button
Reverse the top/bottom and left/right of image (p.49).
!8 AUTO SET button
Execute the setting of Auto setup (includes Input search function,
and Auto PC adj. function). (pp.25, 49).
@3 NETWORK button
Select the Network input. See the owner's manual of “Network
Set-up and Operation”.
@2 COMPUTER 2 button
Select Computer 2 input source (p.26, 27).
@0 S-VIDEO button
Select S-VIDEO input source (pp.26, 37).
w COMPONENT button
Select COMPONENT input source.
@1
@0
!9
!3
!4
y
w
e
t CANCEL button
Return to the menu bar in Memory Viewer menu. See the
owner's manual of “Memory Viewer function”.
!3 VOLUME +/- buttons
Adjust the volume level (p.25).