Projector User Manual

Setting

Factory default

This function returns all setting values except for the user

logo, PIN code lock, Logo PIN code lock, the lamp counter,

and the filter counter to the factory default settings.

Select Factory default and this box

appears. Select “Yes,” and the next

box appears.

Factory default

Select “Yes” to

activate it.

Exit the Setting Menu.

Quit

Filter counter

Use the Point 7 8 buttons

to set the timer. Select

from (Off/100H/ 200H/

300H) depending on the

use environment.

This function is used to set a frequency for the filter

cleaning.

When the projector reached a specified time between

cleanings, a Filter warning icon appears on the screen,

notifying the cleaning is necessary. After cleaning the

filter, be sure to select RESET and set the timer. The Filter

warning icon will not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the

Filter Counter” on page 61.

Filter counter

Filter warning icon (Fig.3) appears on the screen

at a set time.

✔Note:

• At selecting input source, the icon (Fig.4) will appear.

• The Filter warning icon (Fig.3 and Fig.4) will not appear when

the Display function is set to “Off” (p.46), during “Freeze”

(p.25), or “No show” (p.26).

✔Note:

• The icon (Fig.3) appears at turning on.

Fig.4 Filter warning icon

Fig.3 Filter warning icon

Test pattern

Various test patterns are available for use when setting up

the projector.