Projector User Manual

57
Antitheft Alarm Function
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO.MEMO
ON PAGE 75, AND KEEP IT SECURELY. IF YOU FORGET YOUR
PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM
FUNCTION CAN NO LONGER BE CHANGED.
Change the PIN code
Press the F button and enter the four-digit PIN code
number within about 10 seconds. The ALARM indicator
blinks red for a few seconds and a high-pitched
confirmation sound is produced.
Other settings
Reset the settings
Select “Factory default” in the Setting menu to reset the
settings for the Antitheft alarm function.
1
2
While the indicator is blinking, enter a new PIN code,
then you will hear a high-pitched confirmation sound
and the ALARM indicator is turned off.
When you enter an incorrect PIN code, you will hear
a low-pitched sound. If you enter incorrect PIN code
three times in a row, the alarm will start ringing.
The PIN code for the Antitheft alarm function is a
combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to
enter the PIN code. The default PIN code is “1111.”
✔Note:
• This is effective only when the Antitheft alarm setting is
released.
The Alarm operating configuration can be changed when
the Antitheft alarm function is set to “Off.” See page 56 for
setting or releasing this function.
Press the SELECT button at Alarm icon in the Setting Menu
to display the Alarm setting dialog box. Use the Point ed
buttons to select the desired option; use the Point 7 8
buttons to set the selected option.
Battery charge
See the next page for details.
Alarm volume
Small, Medium, Large (default)
Sensitivity
Low ..................... Less sensitive
Medium ............. Normal sensitivity
High ................... Highly sensitive (default)
Ringing time
10 seconds ........ Rings about 10 seconds (default).
60 seconds ........ Rings about 60 seconds.
Long time ........... Rings until the end of the battery life.
Alarm
Press the SELECT button at
the Alarm icon to display the
Alarm setting dialog box.
✔Note:
• The Alarm icon appears dimmed and can
be unavailable when the Antitheft alarm
function is set to “On” or if the battery is not
installed, discharged, or coming to the end
of its life.
• While the Alarm icon is selected, the
Antitheft alarm setting buttons can be
unavailable.
• When selecting “Long time” option in the
Ringing time, the duration of alarm sounding
differs depending on the battery life.
Use the Point 7 8
buttons to set the
selected option.
Alarm operating configuration
Indicator
ALARM indicator
Terminal
F button
Button 1, 2, 3