Owner's Manual Multimedia Projector PLC-EF30N

PREPARATION

POSITIONING PROJECTOR

This projector is equipped with Model LNS-S02 lens. If you use other type of lens, refer to Lens Replacement

and Installation Manual in this projector and install the lens properly.

NOTE: Before replacing lens, check where a projector is used and prepare suitable lens. For specifications of a

Projector Lens, refer to Lens Replacement and Installation Manual in this projector

LENS INSTALLATION

When moving or setting up a projector, be sure to replace Lens Cover to protect surface. And be

careful not to hold or subject lens to strong forces. It may damage lens, cabinet, or mechanical parts.

Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to

provide projected image where you want.

LENS SHIFT ADJUSTMENT

MOVED UP OR DOWN

Use LENS SHIFT button and

POINT UP/DOWN button to

move image up or down.

(Refer to page 22.)

This projector is designed to project on a flat projection

surface.

ROOM LIGHT

Brightness in a room has a great influence on picture

quality. It is recommended to limit ambient lighting in

order to provide best image.