Projector User Manual

11
Part Names and Functions
Top Control
⑩ LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.65, 73).
⑥ WARNING indicator
– Lights red when the projector detects an abnormal
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.62, 73).
⑨ ON/STAND–BY button
Turn the projector on or off (pp.19-21).
⑤ POWER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.53).
⑧ INPUT button
Select an input source (pp.28-29, 38-39).
③ MENU button
Open or close the On-Screen Menu (p.22).
② POINT ▲▼◄► (VOLUME +/–) buttons
– Select an item or adjust the value in the On-Screen
Menu (p.22).
– Pan the image in the Digital zoom + mode (p.37).
– Adjust the volume level (Point ◄► buttons) (p.25).
④ AUTO SETUP button
–Execute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions)
in the setting menu (pp.24, 46).
① SELECT button
– Execute the selected item (p.22).
– Expand or compress the image in the Digital zoom
mode (p.37).
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑦ KEYSTONE button
Correct keystone distortion (pp.24, 47).