Projector User Manual

What is PIN code?

PIN (Personal Identification Number) code is a security

code that allows the person who knows it to operate the

projector. Setting a PIN code prevents unauthorized use of

the projector.

A PIN code consists of a four-digit number. Refer to the PIN

code lock function in the Setting Menu on pages 57-58 for

locking operation of the projector with your PIN code.

Enter a PIN code

Use the Point ▲▼ buttons to enter a number. Press the Point

► button to fix the number and move the red frame pointer

to the next box. The number changes to ⁄.If you fixed an

incorrect number, use the Point ◄ button to move the pointer

to the number you want to correct, and then enter the

correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to Set.

Press the SELECT button so that you can start to operate

the projector.

If you entered an incorrect PIN code, PIN code and the

number (⁄⁄⁄⁄) will turn red for a moment. Enter the

correct PIN code all over again.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no

longer be started. Take a special care in setting

a new PIN code; write down the number in a

column on page 81 of this manual and keep it

on hand. Should the PIN code be missing or

forgotten, consult your dealer or service center.

After the OK icon disappears, you can operate

the projector.

PIN Code Input Dialog Box

Note:

• If the PIN code number is not entered within

three minutes after the PIN code dialog box

appeared, the projector will be turned off

automatically.

• The "1234" is set as the initial PIN code at

the factory.

Basic Operation