Projector User Manual

Setting

Enter a Logo PIN code

Use the Point ▲▼ buttons to enter a number. Press the

Point ► button to fix the number and move the red frame

pointer to the next box. The number changes to ⁄. If

you fixed an incorrect number, use the Point ◄ button to

move the pointer to the number you want to correct, and

then enter the correct number.

Repeat this step to complete entering a four-digit

number.

After entering the four-digit number, move the pointer to

Set. Press the SELECT button so that you can start to

operate the projector.

If you entered an incorrect Logo PIN code, Logo PIN

code and the number (⁄ ⁄ ⁄ ⁄ ) will turn red for a

moment. Enter the correct Logo PIN code all over again.

Logo PIN code can be changed to your desired four-

digit number. Press the Point ▼ button to select Logo

PIN code change and then press the SELECT button.

Logo PIN code dialog box appears, use the point ▲▼

buttons to enter the current code. The New Logo PIN code

input dialog box appears. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it

on hand. If you lost the number, you could no longer

change the Logo PIN code setting. For details on

PIN code setting, refer to "PIN code lock" on pages 57-

58.

Use the Point ▲▼ buttons to switch On or Off, and then

press the SELECT button to close the dialog box.

Change the Logo PIN code lock setting

Enter a Logo PIN code

After a correct Logo PIN code

is entered, the following dialog

box appears.

CAUTION:

WHEN YOU HAVE CHANGED THE LOGO PIN

CODE, WRITE DOWN THE NEW PIN CODE

IN COLUMN OF THE LOGO PIN CODE NO.

MEMO ON PAGE 81, AND KEEP IT SECURELY.

SHOULD THE LOGO PIN CODE BE LOST OR

FORGOTTEN, THE LOGO PIN CODE SETTING

CAN NO LONGER BE CHANGED.

Change the Logo PIN code lock setting

Logo PIN code change

Change the Logo PIN code