Projector User Manual

52
Setting
Set the red frame pointer
to the item and press the
SELECT button.
Use the Point
ed buttons
to set the Lamp mode.
Select from (Lamp1, Lamp2
or Lamp 1/2).
Select [Yes] to
activate it.
This Projector is equipped with 2 Projection Lamps. This
function allows you to choose how to use the lamp as follows.
Lamp1............ Always use Lamp 1.
Lamp2 ........... Always use Lamp 2.
Lamp1/2......... Automatically switch the active lamp from one
lamp to the other .
✔Note:
 •WhenLamp1orLamp2modeisswitchedtoLamp
1/2mode,theactivelampchangesafterthetotal
lightingtimeofacurrentlyusedlampexceeds10
hours.
 •Whenthetotallightingtimeofonelampexceeds
therecommendedtotalhoursofuseintheLamp1/2
mode,theLampmodewillbeswitchedtoLamp1or
Lamp2modeautomatically.Switchingoperationis
donewhenthelampischanged.
 •Lampmodecannotbechangedforawhileafter
turningontheprojector.Lampneedssometimeto
stabilizeafterthepoweristurnedon.Storedlamp
modewillbeactiveafterthelampisstabilized.
•Whenthedifferentlightingtimeofthelampslight
alternately,youmayrecognizedifferentbrightness
andwhitebalanceoneachdifferentlightingtimeof
lamps.
  Whenyouchangetheotherlamp,werecommend
youalwaysusetheotherlampwhichisnotchanged.
 •WhentheTimerissetto“Off”andthetotallighting
timeofonelampexceeds10hoursofuseinthe
Lamp1/2mode,onelampwillbeswitchedtothe
otherlampautomatically.Switchingoperationis
donewhentheprojectoristurnedOffandOn.
 •WhentheprojectorisswitchedtoOff/On(including
Standby),Timersettingisresettooff.
 •WhentheTimerissetto“On”intheLamp1/2mode,
  theLamptimercounterisdisplayedontherightside
oftheLampmodeintheInformationmenu.(p.30)
Lamp mode
The following items can be selected.
Timer setting :
............Switch the timer to On/Off.
Start .........Time to start timer.
(0-24 hours)
Lamp interval . .Time to lamp change.
(1-24 hours)
When selecting Lamp1/2 mode
Use the Point 7 8 buttons to
select items and press the
SELECT buttons.
Select [Yes] to
activate it.
✔Note:
  •The Lamp timer counter appears with
the Lamp status before 10 seconds
when the Lamp will be switched.
Timer setting