INFORMATION TO THE USER NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
C All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use, Unplug this projector from AGC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table.
( TABLE OF CONTENTS ) PAGE [T EcT OSLO O OPPRESSOR 5 CONNECTING THE PROJECTOR «shirrs sett mitt ee sett seaweed e 67 SETTING-UP THE PROJECTOR OPERATION OF CONTROLS REMOTE CONTROL UNIT OPERATION USING THE PROJECTOR -+ e 13-14 PICTURE ADJUST TERN sett sett et cease naan ins 15 AIR FILTER CARE AND CLEANING 16 LAMP REPLACEMENT/TEMPERATURE INDICATORS <+ evtreterterteermomteresiraens s oiriosairanenns 16 HELPFUL HINTS-Problems and Solutions: TECHNICAL SPECIFICATIONS C POWER REQUIREMENTS ) Your projector uses nomi
DESCRIPTION SPEAKER AR INTAKE VENT TOP CONTROLS CARRY HANDLE PROJECTION LENS LEVELING/ELEVATING FEET J REMOVABLE LENS COVER MAINS ON/OFF SWITCH EXHAUST VENT Connect the AC power supply cord (supplied) to the projector. GUARD RELEASE LEVER AG cord may not be connected by the Guard. Use the carry handier when moving projector. NOTE: Replace the lens cover when moving the projector Do not hold the projector by the filter cover when moving. prevent damage fo the lens.
C CONNECTING THE PROJECTOR ) Your projector is equipped with various audiovisual Inputs and outputs including S-VHS video, CONNECTING TO THE AV INPUT JACKS Connect to the video and audio outputs of a VCR, video disc player, video camera, satellite TV tuner or other AV equipment. # Connect video/audio outputs from external sources 1o these input jacks, ® [f the audio signal from the AV equipment is stereo, be sure to connect the right and left channels to the respective right and left audio input jacks.
Projector e é Satellite TV Tuner — ——J Video Cassette Recorder R g Video Disc Player Speaker gt Speaker Audio P ¢ VIDEO EQUIPMENT Video Cassette Recorder Video Disc Player Sat elite VIDEO AUDIO out Put OUTPUT 0 ) e oox S-VIDEO = INPUT VICED INPUT | I aim v SEES Ll T T AUDIO INPUT AUDIO et T 55 vice INPUT AUDIO MONITOR MORTON A e—— OUTPUT OUTPUT R L Speaker (L} A AUDIO SPEAKER biped INPUT ~ OUT AUDIT DIVIDE _@ L " OUTPUT OUTPUT junlelelo] STEREO AMP.
SETTING-UP THE PROJECTOR * This projector js basically designed to project on a flat projection surface. * This projector can be focused from 4.9' (1.5m) ~ 1.7 * Use the illustration below as an example when positioning the projector to the screen. SIDE VIEW The projector should ideally be placed in a room with very limited light. Picture quality will be directly affected by lighting conditions, 90° 4.9 (1.5m) 18.7° {6.
OPERATION OF CONTROLS POWER (LAMP) ON/OFF BUTTON Used to tum projection lamp on or off. POWER INDICATORS Lights dim when the projector is on. Lights bright when the projector s stand-by position. \ READY INDICATORS Lights green when projector lamp is ready to be turned on. TEMPERATURE WARNING INDICATOR Flashes red when internal projector temperature is too high, [~ e | TOP CONTROLS TOP CONTROLS LAMP REPLACEMENT INDICATOR Lights orange when projection lamp is nearing end of service life.
AUDIO INPUT JACKS Used to connect an audio input to the projector. VIDEO INPUT JACK Used to connect a video source to the projector. WIRED REMOTE JACK When using the wired remote control, connect the remote cable 1o this jack. MAINS ON/OFF SWITCH Used to tum the projector on. | N\ S-VIDEO INPUT JACK the projector. Used to connect a 8-VHS video source to STEREO AUDIO OUTPUT JACK Used o connect a external stereo amp. and speakers system. VIDEO MONITOR OUTPUT JACK Permits video connection to a monitor.
REMOTE CONTROL OPERATION INFRARED/WIRED REMOTE CONTROL SOUND MUTE BUTTON Used to mute sound. POWER (LAMP) ON/OFF BUTTON Used to turn projection lamp on or off. NORMAL BUTTON Used to reset to normal picture adjustment preset by factory. T LIGHT UP BUTTON Press to light the back light for function buttons on the remote control unit for 5 seconds. Press any other function button during the lighting to light for another § seconds. VOLUME BUTTONS Used to adjust volume.
Nate: For correct polarity (+ and terminate, be sure the patter terminals are in contact with the pins in the compartment, The remote control unit can be used as wireless or wired remote control. Point the remote control toward the back of the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4' (Sm} and 60 ° projector.
( USING THE PROJECTOR ) Connect the projector to a video source (VCR, Video Camera, Video Disc Player, etc.) using the appropriate terminals on the rear of the projector (See page 6-7). Connect the projector's AC power cord into a wall outlet and turn the MAINS ON/OFF switch (located on the back of the projector) to ON position. The POWER indicator will light RED and the READY indicator will light GREEN. Press the POWER (LAMP) ON/OFF button on the projector or on the remote control unit | 10 ON.
VOLUME ADJUSTMENT Press VOLUME bunions (located on projector or remote control uni) to adjust the volume. The screen display will appear. Pressing will increase volume and the green indicator will increase to the right on the screen. Pressing () will decrease volume and the green indicator will decrease to the left on the screen. SOUND MUTE ADJUSTMENT Pressing SOUND MUTE button on the remote control unit will mute audio.
C TOP CONTROLS PICTURE ADJUSTMENTS ) REMOTE CONTROL UNIT OF THE PROJECTOR . © LEVEL CONTROL MENU BUTTONS BUTTON MENU LEVEL CONTROL BUTTON BUTTONS NORMAL BUTTON NORMAL BUTTON Picture adjustments have been preset at the factory to our quality standards. The picture adjustments can be made by the MENU and LEVEL buttons on the projector or on the remote control unit. 1. Press the MENU button to select the picture adjustments function.
( AIR FILTER CARE AND CLEANING ) The removable air filter prevents dust from accumulating on the surface of the rejection lens and projection mirror, Should the air filter become clogged with dust particles, it will reduce the cooling fan's effectiveness and may result in internal heat built up and reduce the life of the projection lamp. The air filter should be cleaned about every 100 hours. Clean the air filter more often when the projector is used in & particularly dusty or smoky place.
( HELPFUL HINTS-Problems and Solutions Check the following chart before requesting service. No power * Plug the projector into an AC outlet. *Turk the MAINS ON/OFF switch to ON. # Press the POWER (LAMP} ON/OFF button to ON. ® Check the READY INDICATOR light ON. * One minute has not passed after the projector turned OFF. NOTE: After pressing the POWER {LAMP} ON/OFF button to OFF , the projector functions as follows. 1. The READY indicator will turn off, 2.
TECHNICAL SPECIFICATIONS ) Portable LCD Color Video Projector 6.2" (1588 mm ) » 16.9” (430 mm) X 15.2" (385 mm} 19.6 Ibs (8.9 kg) 1.3" TFT Active Matrix type { Thin Film Transistor) » 3 544,410 (181,470 > 3) Adjustable from 30" to 150" 100 :1 580 TV lines 2.8 ~ 3.2 lens with Manual zoom and focus 2.04” (51.8 mm) 4.9 (1.5m) ~ 18.7' (6.
SONYA INDUSTRIAL VIDEO LCD PROJECTOR LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered 1o and picked up from an Authorized Sonya Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sonya Service Centers may be obtained by writing to SFS Corporation, SC's warranty administrator, at any of the addresses listed below, or by calling {toil-free} 1-800-421-5013.