User Manual

19
BEFORE OPERATION
Indicators and Remote Receiver
LAMPREADYWARNING
TEMP.
LAMP
REPLACE
LAMP INDICATOR
Light is dim when the projector is
on. And light is brightened
when the projector is in stand-by
mode.
LAMP REPLACEMENT INDICATOR
Light turns to yellow when the life of a
projection lamp draws to an end.
(Refer to Page 42.)
REMOTE RECEIVER
READY INDICATOR
Light is green when the projector
is ready to be turned on.
TEMPERATURE WARNING INDICATOR
Flashes red when internal projector
temperature is too high.
Point the Remote Control Units toward
this Receiver when pressing the buttons.
Maximum operating range for the Remote Control
is about 16.4' (5m) and 60° front of the projector.
30˚
30˚
5m
(16.4')
5m
(16.4')
The Operating Range of the Remote Control