Owner's Manual LCD Front Projector PLV-55WHD1, PLV-65WHD1

22
Use this feature to switch between analog off-air
channels and analog cable channels.
1
Press the TUNER key to select analog channels.
2
Press the MENU key to display the Main menu.
3
Use the CURSOR ed keys to highlight (green)
Analog Antenna Signal. Press ENTER.
4
Use the CURSOR ed keys to choose Cable or
VHF/ UHF. Press ENTER.
5
Press the EXIT key to return to normal TV viewing.
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH e
(up) CH d (down) keys. This list can be customized by
deleting and/or adding channels.
1
Press the MENU key to display the Main menu.
2
Use the CURSOR ed keys to highlight (green)
Channel Scan Memory. Press ENTER.
CHANNEL SCAN MEMORY
To Delete channels from the Channel Scan Memory
3
Use the CHANNEL (CH ed) keys or numerical
keys to select desired channel. HINT: Press the
TUNER key to switch between Digital and Analog
Channel Scan memories.
4
Press the ENTER key to delete the channel. The
display will change to “Deleted.”
Notes:
“Delete?” will
appear below the
channel number if
the selected
channel is already
in the Channel Scan
Memory.
Use the Number
keys to tune to
active channels not
in the Channel Scan
Memory list.
To Add a channel to the Channel Scan Memory
3
Use the numerical keys 0–9 to select desired
channel number. “Add?” will appear below the
channel number. HINT: Press the TUNER key to
switch between Digital and Analog Channel Scan
memories.
4
Press the ENTER key to add the channel. The
display will change to “Added.”
When you have
finished adding
and/or deleting
channels, press
the EXIT key to
return to normal
TV viewing.
■ When a digital channel is deleted, all of that channel’s sub-
channels are deleted as well.
■ Only previously deleted digital channels can be added back
to the Channel Scan Memory.
■ If one digital sub-channel is added back to the Channel
Scan Memory all of that channel’s sub-channels will be
added back.
■ If the last remaining digital channel is deleted, the entire
previous Channel Scan Memory list will be restored
automatically.
■ If the last remaining analog channel is deleted (cable or off-
air channel), ALL analog channels (cable or off-air) will be
restored automatically, regardless of the previous Analog
Channel Scan Memory list.
■ When an external input is selected (VIDEO1, VIDEO2,
VIDEO3, or HDMI), press INPUT key to switch between
Digital and Analog channels.
ANALOG ANTENNA SIGNAL