Multimedia Projector MODEL PLV-HD2000N/E ✽ Projection lens is optional.
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This projector should be operated only from the type of power source indicated on the marking label.
COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
TABLE OF CONTENTS FEATURES AND DESIGN 6 DISPLAY ADJUST DISPLAY ADJUSTMENTS PREPARATION NAME OF EACH PART OF PROJECTOR SETTING-UP PROJECTOR CONNECTING AC POWER CORD LENS INSTALLATION POSITIONING PROJECTOR LENS SHIFT ADJUSTMENT PICTURE LEVEL AND TILT ADJUSTMENT INSTALLING PROJECTOR IN PROPER POSITION MOVING PROJECTOR 7 7 8 8 9 9 9 10 10 11 CONNECTING PROJECTOR 12 TERMINALS OF PROJECTOR CONNECTING TO COMPUTER CONNECTING TO VIDEO EQUIPMENT 12 15 16 BEFORE OPERATION SIDE CONTROLS AND INDICATORS OPERATIO
FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 68.72 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and computer input signals including; ● Computers IBM-compatible computer up to 1600 x 1200 resolution.
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET INFRARED REMOTE RECEIVER POWER CORD CONNECTOR PROJECTION LENS MAIN ON / OFF SWITCH LENS CAP CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard. CARRYING HANDLE LEVEL AND TILT ADJUST HANDLE BACK OF CABINET EXHAUST VENT INFRARED REMOTE RECEIVER HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot.
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with singlephase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use.
PREPARATION LENS INSTALLATION Before setting up a projector, install Projection Lens on a Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector. 2. For installation, refer to installation manual supplied to a Projector. When moving or setting up a projector, be sure to replace a Lens Cap to protect a surface.
PREPARATION PICTURE LEVEL AND TILT ADJUSTMENT Picture tilt and projection angle can be adjusted with handles on both sides of a projector. Projection angle can be adjusted to 5.7 degrees upper way. 1 Press knob on handle. Handle pop out. 2 Turn handles (right and left) until picture is projected on proper position. Adjust height of rear adjustable feet by rotating them until projector properly stabled on table. 3 Press knob and retract handle. REAR ADJUSTABLE FEET. (Refer to P7).
PREPARATION MOVING PROJECTOR For safety, be sure to hold Carrying Handles on both sides by 2 or more people when moving a projector. Moving it unproperly may result in damage of cabinet or person's injury. Replace lens cap and retract feet to prevent damage to lens and cabinet. 1 Pull up lock buttons on each side of carrying handles and release locks. 2 Pull carrying handles out fully until it's locked (with a click). Move a projector by holding two handles by 2 or more people.
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, contact sales dealer where you purchased a projector.
CONNECTING PROJECTOR INPUT/OUTPUT TERMINALS AND JACKS INPUT 1 INPUT 2, 3 INPUT 1 DUAL LINK SDI INPUT JACKS DUAL LINK SDI OUTPUT JACKS AUDIO INPUT JACKS Connect Dual link SDI output from video equipment to these jacks. (Refer to P16.) Connect Dual link SDI input from video equipment to this jack. (Refer to P16.) Connect audio output from computer or video equipment to these jacks. (Refer to P15, 16.
CONNECTING PROJECTOR USB PORT (Series B) SERIAL PORT IN TERMINAL SERIAL PORT IN IN LINK A OUT G/Y B/Pb IN LINK B OUT SERIAL PORT OUT TERMINAL SERIAL PORT OUT R/Pr H/HV V AUDIO R CONTROL PORT INPUT 2 This terminal outputs signal from SERIAL PORT IN. More than two projectors can be controlled with one computer by connecting SERIAL PORT IN. of another projector to this terminal.
CONNECTING PROJECTOR CONNECTING TO COMPUTER Cables used for connection (✽ = Cables are not supplied with this projector.) • DVI Cable ✽ • DVI-VGA Cable (HDB 15 pin) ✽ • BNC Cable (BNC x 5) ✽ • Audio Cables (RCA x 2) ✽ NOTE : When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. Turn a projector and peripheral equipment on before computer is switched on.
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection NOTE : When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. Turn a projector and peripheral equipment on before computer is switched on. • Video Cable (BNC)✽ • Audio Cable (RCA x 2) ✽ • Scart Cable ✽ • DVI-VGA Adapter ✽ (✽ = Cables are not supplied with this projector.) Video Source (example) (such as DVD player or high-definition TV source.
BEFORE OPERATION SIDE CONTROLS AND INDICATORS REAR INDICATORS SIDE CONTROLS FRONT INDICATORS SIDE CONTROLS ZOOM buttons Adjust zoom. (P24) POWER ON–OFF button FOCUS buttons Adjust focus. (P24) ZOOM Turns the projector on or off. (P23) FOCUS ON-OFF MENU button LENS SHIFT button Open or close the On-Screen Menu operation. (P21, 22) SELECT button Executes the item selected. (P21) Select LENS SHIFT function.
BEFORE OPERATION INDICATORS FRONT INDICATORS LAMP READY LAMP REPLACE WARNING TEMP. LAMP REPLACE indicator WARNING TEMP. indicator This LAMP REPLACE indicator lights yellow when any of Projection Lamps is nearing its end, and flashes when any of them becomes out. Check which lamp needs to be replaced on Lamp Status Display. (P43-44, 48) This indicator flashes red when internal projector temperature is too high.
BEFORE OPERATION OPERATION OF REMOTE CONTROL q SELECT button Executes the item selected. (P21) w SIGNAL EMISSION indicator This indicator lights red while a signal is being sent from the remote control to the projector. e SCREEN button Selects image screen. (P29) r ZOOM button q Adjusts zoom. (P24) t FREEZE button Freezes the projected picture. (P24) y FOCUS button Adjusts focus. (P24) u POINT (UP/DOWN/LEFT/RIGHT) button Selects an item or adjusts value in the On-Screen Menu.
BEFORE OPERATION REMOTE CONTROL CODE CHANGE AND OPERATING RANGE Code Change This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. (Change the remote control code for the projector first before changing that for the remote control. See “Remote control” on page 40.
BEFORE OPERATION OPERATING ON-SCREEN MENU ON-OFF HOW TO OPERATE ON-SCREEN MENU ZOOM REMOTE CONTROL FOCUS ▲ You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. MENU BUTTON 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. POINT BUTTON Used to move Pointer UP/ DOWN/ RIGHT/ LEFT.
BEFORE OPERATION MENU BAR GUIDE WINDOW Shows selected item of ONSCREEN MENU. SYSTEM BOX Used to select computer system or video system. Shows selected system on this box. (Refer to P27-28) INPUT MENU Used to select input source (Input 1, Input 2, Input 3 or Input 4). Refer to P25. 22 DISPLAY ADJUST MENU SETTING MENU Used to adjust size of image. {Full/Normal/Anamorphic} (Refer to P29) Used to adjust parameters to match with input signal format.
BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON PROJECTOR 1 Complete peripheral connections (with Computer, VCR, etc.) before turning on projector. (Refer to "CONNECTING TO PROJECTOR" on Pages 13~16 for connecting that equipment.) 2 Connect a projector's AC Power Cord into a wall outlet and turn MAIN ON/OFF SWITCH to ON. LAMP indicator lights RED, and READY indicator lights GREEN. 3 Press POWER ON-OFF button on Side Control or on Remote Control Unit to ON.
BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press ZOOM ▲/▼ button on Side Control or on Remote Control Unit. Message “Zoom” is displayed. 2 Press ZOOM ▲ button to make image larger, and press ZOOM ▼ button to make image smaller. Message disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press FOCUS ▲/▼ button on Side Control or on Remote Control Unit. Message “Focus” is displayed. 2 Adjust focus of image by pressing FOCUS ▲/▼ button(s) . Message disappears after 4 seconds.
BASIC OPERATION SELECTING INPUT SOURCE DIRECT OPERATION Select INPUT source by pressing INPUT 1/2 and INPUT 3/4 buttons on Side Control or INPUT 1, INPUT 2, INPUT 3 and INPUT 4 on Remote Control Unit. INPUT 1/2 button INPUT 1-4 buttons INPUT 1 INPUT 1 INPUT 2 INPUT 2 INPUT 3/4 button MENU OPERATION 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select Input and press SELECT button. Another dialog box INPUT SELECT Menu will appear.
BASIC OPERATION WHEN SELECT INPUT 2 (5 BNC TERMINAL) INPUT MENU Move a pointer to source that you want to select and press SELECT button. INPUT Menu icon RGB Move arrow to INPUT source that you want to select, and then press SELECT button. When connect a computer output [5 BNC Type (Red, Green, Blue, Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HV and V jacks. YCbCr When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks.
BASIC OPERATION SYSTEM SELECT AUTOMATIC MULTI-SCAN SYSTEM This projector automatically tunes to most different types of computers based on XGA, SXGA, SXGA+, WXGA or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 53). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set manually.
BASIC OPERATION SELECT VIDEO SYSTEM 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SYSTEM SELECT Menu icon. 2 Press POINT DOWN button to move a red arrow pointer to system that you want to select and then press SELECT button.
DISPLAY ADJUST DISPLAY ADJUSTMENTS SCREEN ADJUSTMENTS This projector has a picture screen resize function, which enables you to display desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to DISPLAY ADJUST Menu icon. 2 Press POINT UP/DOWN button and move a red frame pointer to Screen and then press SELECT button twice.
DISPLAY ADJUST AUTO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Auto PC Adj. DISPLAY ADJUST MENU 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to DISPLAY ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to AUTO PC Adj. icon and then press SELECT button twice.
DISPLAY ADJUST MANUAL DISPLAY ADJUSTMENTS This projector can automatically tune to display signals from most computers and video equipments currently distributed. However, some computers and video equipments employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector.
DISPLAY ADJUST Current mode Press SELECT button at this icon to display previous items. Press SELECT button to show information of computer selected. Clamp Current mode Adjusts clamp position. When image has a dark bar(s), try this adjustment. Press SELECT button at Current mode icon to show information of computer connected. 3 Store To store adjustment parameters, move a red frame pointer to Store icon and then press SELECT button.
DISPLAY ADJUST IMAGE ADJUSTMENTS IMAGE LEVEL SELECT (DIRECT) Select image level among Standard (AV), Cinema, Standard (PC), Real and Image 1 ~ Image 10 by pressing IMAGE button on Side Control or on Remote Control Unit. Select image level Image 1 ~ Image 10 by pressing IMAGE 1 ~ IMAGE 10 buttons on Remote Control Unit. Standard (AV) Normal picture level preset on this projector for AV mode.
DISPLAY ADJUST IMAGE LEVEL ADJUSTMENTS 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT UP/DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).
DISPLAY ADJUST Noise reduction Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to “Off”, “L1”, “L2” or “L3” to reduce noise (rough parts) of image. Off ······· Noise reduction OFF position. L1 ········ Noise reduction LEVEL 1 position. L2 ········ Noise reduction LEVEL 2 position. L3 ········ Noise reduction LEVEL 3 position. Press SELECT button at this icon to display previous items. Press POINT LEFT/RIGHT buttons to change position.
DISPLAY ADJUST 4 To move the red frame pointer to "MENU", and then press the SELECT button. The message "OK"? is displayed. Move the pointer to [Yes] and then press SELECT button. The COLOR MANAGEMENT menu will be exited and the display will return to the IMAGE ADJUST menu. (At this time, the image will stop being paused and normal projection will resume.) After changing the COLOR MANAGEMENT settings, use the IMAGE ADJUST menu to store the changed settings.
DISPLAY ADJUST Gamma balance The Gamma balance function can be used to adjust the R, G, B Gamma balance of the screen. 1 Press the POINT UP/DOWN button to move the red frame pointer to "Gamma balance", and then press the SELECT button. The Gamma balance adjust menu will appear. 2 Use the POINT LEFT/RIGHT buttons to move the adjust point (R P1, R P2, R P3, G P1, G P2, G P3, B P1, B P2, B P3) and press the POINT UP/DOWN button to adjust value.
SETTING SETTING MENU 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red-frame pointer to SETTING icon. 2 Press POINT DOWN button to move a red-frame pointer to item that you want to set and then press SELECT button. Setting dialog box appears. Language SETTING MENU SETTING Menu icon Set a red frame pointer to item and press SELECT button.
SETTING Menu position This function is used to adjust the on-screen menu display position. When a SELECT button is pressed, the adjustment screen is displayed (arrows appear). Use the POINT UP/DOWN/LEFT/RIGHT button(s) to adjust the position. After making the adjustment, press a SELECT button to return to the Menu screen. Logo When this function is “On,” projector displays logo when starting up. Ceiling When this function is “On,” picture is top/bottom and left/right reversed.
SETTING Power management This projector is equipped with a power management function. When the input signal is interrupted and any button is not pressed for 30 seconds or more, the power management function operates in order to reduce power consumption and conserve lamp operating time. The factory default settings for power management are "Ready" and "5 Min".
SETTING Key lock This function locks the operation of the projector's control panel and the remote control. This locks operation of the projector's control panel. This locks operation of the remote control. This cancels the Key lock function. If the projector's control panel accidentally becomes locked and you do not have the remote control nearby, turn the MAIN ON/OFF switch to OFF. And then while pressing a SELECT button, return the MAIN ON/OFF switch to ON again.
APPENDIX MAINTENANCE WARNING TEMP. INDICATOR The Warning Temp. Indicator flashes red to let you know the internal temperature of the projector exceeds the normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator will go out. (The Warning Temp. Indicator continues flashing.
APPENDIX LAMP MANAGEMENT This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management Function. Lamp Management Function detects status of all lamps and shows status on screen or on LAMP REPLACE indicator. This function also automatically controls Lamp Mode when any of lamps is out for end of life or malfunctions.
APPENDIX LAMP REPLACEMENT When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. FRONT INDICATORS REAR INDICATORS LAMP READY WARNING: TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER. LAMP REPLACE LAMP READY WARNI TEMP.NG LA P REPLM ACE WARNING TEMP.
APPENDIX ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : : PLV-HD2000N/E POA-LMP100 (Service Parts No. 610 327 4928) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 13 ~ 16. 2. Check cable connection. Verify that all computer, video and power cord are properly connected. 3. Verify that all power is switched on. 4. If a projector still does not produce an image, re-start your computer. 5.
APPENDIX SERVICE WARNING: High voltages are used to operate this projector. Do not attempt to open cabinet. You can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section on page 46. To correct failure, try "Solutions". If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station or store where you purchased unit. Give model number and explain difficulty. We will advise you how to obtain service.
APPENDIX INDICATORS AND PROJECTOR CONDITION Check the Indicators for projector condition. Indicators LAMP REPLACE yellow WARNING TEMP. red READY LAMP green red Projector Condition The projector is OFF. (The MAIN switch OFF position or the AC Power Cord is unplugged.) ※ The projector is READY to be turned on with the POWER ONOFF button. ※ The projector is operating normally. ※ The temperature inside the projector is abnormally high. The projector cannot be turned on.
APPENDIX MENU TREE Input Input 1 LINK-A (YCbCr) Go to System (3) LINK-B (YCbCr) Go to System (3) Dual (YCbCr1) Input 2 Input 3 Dual (YCbCr2) Go to System (3) Dual (YCbCr3) Go to System (3) Dual (YCbCr4) Go to System (3) Dual (RGB1) Go to System (3) Dual (RGB2) Go to System (3) RGB Go to System (1) YCbCr Go to System (2) RGB (Analog) Go to System (1) RGB (Scart) RGB (PC digital) RGB (AV HDCP) Display adjust XGA 1 Screen Full Normal System XGA 1 1) XGA 2 Anamorphic Aspect H
APPENDIX Image adjust Image Standard (AV) Language English German Standard (PC) French Real Italian Image 1 ~ Image 10 Spanish Quit Portuguese Contrast 0 - 63 Brightness 0 - 63 Color 0 - 63 Tint 0 - 63 Color temp.
APPENDIX TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System Component Signal Motorized Lens Shift Scanning Frequency Projection Lamp Input 1 Jacks Input 2 Jacks Multi-media Projector 22.9" x 10" x 30.9" (581 mm x 252 mm x 783 mm) 82.0 lbs (37.2 kg) 1.64" TFT Active Matrix type, 3 panels 2048 x 1080 dots 6,635,520 (2048 x 1080 x 3 panels) PAL, SECAM, NTSC, NTSC4.
APPENDIX CONFIGURATIONS OF TERMINALS DVI-I TERMINAL (DIGITAL/ANALOG) This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this terminal with DVI cable (supplied). Pin Configuration C1 C2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 C1 C2 C3 C4 C5 Analog Red Input Analog Green Input Analog Blue Input Analog Horiz. sync Analog Ground (R/G/B) 1 2 3 4 5 6 7 8 T.M.D.S. Data2– T.M.D.S. Data2+ T.M.D.S.
APPENDIX COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 230 MHz of Dot Clock.
APPENDIX When a input signal is digital from DVI terminal, refer to chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA1 D-WXGA2 D-WXGA3 D-WXGA4 D-WXGA5 RESOLUTION 640 x 480 720 x 480 (Progressive) 768 x 575 (Progressive) 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1360 x 768 1368 x 768 H-Freq. (kHz) V-Freq. (Hz) ON-SCREEN DISPLAY 31.47 31.47 31.25 37.879 43.363 48.36 47.70 48.36 56.16 46.50 59.94 59.88 50.00 60.32 60.00 60.00 60.00 60.00 60.00 50.
APPENDIX DIMENSIONS Unit : inch (mm) 22.87 (581.0) 10.15 (258.0) 9.90 (251.5) 5.18 (131.5) 17.56 (446.0) 17.56 (446.0) 7.01 (178.0) 7.01 (178.0) 9.90 (251.5) 22.87 (581.0) 5.7° 2.36 (60.0) 4.23 (107.5) 14.74 (374.5) 9.72 (247.0) 22.93 (582.5) 30.83 (783.0) 10.61 (269.5) 3.26 (82.8) 6.81 (173.0) 1.38 (35.0) 1.57 (40.0) 8.27 (210.0) 8.27 (210.0) Screw Holes for Ceiling Mount Screws: 9-M8 Depth: 0.315 (8.0) 8.62 (219.0) 9.25 (235.
LCD PROJECTOR LENS REPLACEMENT AND INSTALLATION PROCEDURES CAUTION When installing or replacing the Projection Lens, refer to this manual. For installation of the lens, use the parts designated in the manual. Do not use the installation manual and Light-Block Sheets in the lens package. Check the following parts supplied to this projector. ● LIGHT-BLOCK SHEETS 6 pcs. LENS ATTACHMENT (01) 1 pce. ● LENS ATTACHMENT (02) 1 pce. ● AVAILABLE LENS This projector applies the Projection Lenses listed below.
LENS REPLACEMENT AND INSTALLATION PROCEDURE NOTE : The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following procedure below. 1 A Remove Lens Cover. Remove 2 Screws A. Push part B and pull Upper Lens Cover up. (See Fig. 1.) UPPER LENS COVER B Fig-1 C 2 Remove 4 Screws C. Pull Lower Lens Cover toward front and remove. (See Fig. 2.
4 Remove Lens Cap on the rear (mounting side) of Projection Lens and mount Lens on the lens Attachment with 4 Screws. (Use screws attached on lens.) Connect the Lens Motor Lead connector to the socket on the right-top of the lens attachment. (Motor Driven Lens only.) See Fig. 5. LENS ATTACHMENT LENS LOCK SCREW LENS LOCK LEVER Fig-4 Lens attachments For each lens. DRIVER IN THE LENS Part No. (610 275 6029) Lens Model No. LENS ATTACHMENT TYPE No. (PART No.
6 This projector has 6 Light-Block Sheets. Use 2 Light-Block Sheets corresponding with lens. (Refer to the list below.) Use 1 Light-block Sheet for MODEL LNS-W03 Set 2 Light-Block Sheets through the lens. Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8. NOTE: ● Be sure to set each Light-Block Sheet as shown in Fig-8. ● Make sure the mark (TOP and BACK) on Light-Block Sheets are correct and set them properly. Light-Block Sheets For each lens.
7 Adjust focus of the Projection Lens. (LNS-W01, LNS-W01Z, LNS-T01, LNS-T01Z and LNS-W03 only.) Set up the projector and project image on the screen. Loosen Focus Lens Lock Screw and rotate Projection Lens to obtain proper focus. After adjusting focus, be sure to lock Projection Lens with Focus Lens Lock Screw securely. (See Fig. 4.) Adjust focus of Projection Lens MODEL LNSW03, following Focus Adjustment on page 6. 8 9 10 Replace Lower Lens Cover.
FOCUS ADJUSTMENT (For Model LNS-W03) Set up the projector and project image on the screen. 1. Loosen the Focus Lock Screw on the projection lens. 2. Rotate the projection lens to obtain proper focus on center area of the screen. ● mark (yellow) When the distance of the screen and lens is 1 meter, set ● mark (yellow) of the lens on Focus Lock Screw position. 3. Lock the Focus Lock Screw securely. When proper focus is not observed at outer area of the screen, proceed following adjustments. 4.
Correcting the focus When the lens is attached to the projector and images are being projected onto the screen, the peripheral focus may be out of focus in some localized areas. If this happens, insert the accessory in between the lens attachment and the lens to correct the focus. Inserting the spacers corrects the distance for best diagonal focus at the screen. The corrected distance is determined by the thickness of the spacers that are used.
-8- 3.4 2.6 2.4 1.9 2.2 1.7 1.5 1.2 5.6 MIN MAX MIN MAX MIN 2.7 2.1 2.0 1.6 ---------------- MAX MIN MAX LNS-W06 2.7 2.7 3.4 3.4 4.5 1.8 15.4 2.7 Upper max H1 H2 3.2 4.0 4.1 5.4 2.1 18.5 3.2 16.6 24.2 7.0 9.4 9.3 11.9 11.9 Down max LENS SHIFT (UP/DOWN) 2.0 3.5 ------ MIN 2.6 1.4 1.0 0.7 NONE LNS-W03 LNS-W04 12.3 9.2 6.1 NONE 2.1 LNS-T01 LNS-T01Z 1.6 13.9 20.2 16.2 11.2 5.8 7.8 7.8 9.9 9.9 16.4 3.8 13.7 4.9 4.0 5.4 7.0 120 3.1 4.5 5.
Printed in Japan Part No. 610 327 3082 (1AA6P1P5055-- MA4A) SANYO Electric Co.
