User Manual

- 60 -
Optical adjustments
Note:
If the picture is left / right reversed on a screen, you can
select front or rear projection for your convenience.
Rear function
1. Enter the service mode.
2. Select item no. "400" and change data value to select
a direction of projection.
Item no. Adjustment value Function
400 0 Front projection
1 Rear projection
3. Exit the service mode.
---
4. After servicing, this item should be set to default
value = 1.
Note: Service mode is refer to "Service Adjustment
Menu Operation".
Front function
Overview for Servicing (an example)
● Rear - Front Project SW
Warning!
Do not use Optical/chassis unit with inclining.
It may result in malfunction of the LCD Projection TV
Mirror
Screen