User Manual

- 68 -
Optical adjustments
2
Picture Image and focus adjustment (Projection lens adjustment)
Screw-A
Focus ring-E
Adjustment Cam-B
Adjustment Cam-C
Screw-D
Screw-A
Projection lens
Front panel
Optical cover
Front cover
F
F
F
Remove the Front cover unit, remove the Front
panel unit and remove the Optical cover.
Adjustment area
Install all parts on a back side.
Before adjustment
1. Turn the LCD projection TV on and display grid
pattern or circular pattern on the screen.
2. Be sure to fixed the Optical / Chassis unit with 3
screws to the cabinet.
Install all parts on a back side, otherwise it may
cause lose of performance of Optical
Adjustment.
(Refer to mechanical disassemblies.)
3. Remove the Front Cover unit from the cabinet
bottom.
4. Remove the 3 screws F and remove the Front
panel unit.
5. Remove the Optical Cover.
(Refer to mechanical disassemblies.)
6. When adjust the picture image (horizontal center-
ing and vertical centering) , loosen the 4 screws
A of the lens shift unit.
7. When adjust the picture focus, loosen the focus
fixed screw D of the projection lens.