User Manual

-72-
● Service Adjustment Menu Operation
CHANNEL
VOLUME
INPUT
Remote Control
Side Control
◆ To enter service mode
To enter service mode, press and hold the "INFO" button on the remote con-
trol, then press the "VOL(–)" button on the side control. As shown in a figure,
the service mode display appears on the screen.
◆ To adjust service data
Adjust service data using the following control buttons on the LCD projection
TV or the remote control.
– "CHANNEL UP" ..........................................An item number increases.
– "CHANNEL DOWN" ..................................An item number decreases.
– "POINT RIGHT" or "VOLUME (+)" ............An adjustment value increases.
– "POINT LEFT" or "VOLUME (–)" ..............An adjustment value decreases.
◆ To exit service mode
To quit the service mode, press the "POWER ON/OFF" button only once on
the LCD projection TV or the remote control.
Normal Mode
VOL(-)
VOL(-)
+
Service Mode
Service Mode
Service Mode Display
INFO
INFO
w
q
e
POWER
NO 0 Data 105
TA TB TC
2662 3237 3050
F1 F2 F3 F4
80 100 100 100
Data value
Item No.
Temperature
Fan rotation speed
Note :
This part of display is available at the service mode No.600s.
■ Electrical Adjustments
w
q
e