VCR Codes Chart
1. Find your equipment’s brand
codes in the charts on pages 5
and 6. After programming is
confirmed, enter codes in
spaces provided on back of
remote and below.
2. Press and hold the VCR, TV
or CABLE key while entering
the two-digit code number.
The mode key will flash 5
t i m e s .
3. Repeat Step 2 for each
piece of equipment you
have (VC R , TV, a n d / o r
Cable Converter Box).
If you enter an incorrect code
number, repeat Step 2.
After entering a code number
check the Power and Channel
operation. If these functions
operate pro p e r l y, pro g r a m -
ming is complete. If not,
reprogram using another code
if available.
PROGRAMMING THE REMOTE
TO THE OWNER
Welcome to the World of Sanyo
Thank you for purchasing the Sanyo “Moonlight” Universal
Remote Control. You made an excellent choice for Performance,
Reliability, Value, and Styling.
The RMT-U100 replaces three separate remote controls. This
simplifies the operation of your home entertainment system.
This remote will operate your Video Cassette Record e r,
Te l e v i s i o n , and Cable Conve rter Box. Simply program it
according to the directions in this owner’s manual. Then press
the proper function key (VCR, TV, or CABLE ) to operate each
product.
The Sanyo Universal Remote Control features large glow-in-
the-dark basic operating keys. It also has function keys that
light when a key is pressed. This indicates the active mode. You
never need to wonder which component the remote is
controlling. Just observe which mode key lights. That’s the
answer.
The RMT-U100 universal remote control comes with keys that
are preset to operate your Video Cassette Recorder, regardless of
the mode you have selected.
B
EFORE
Y
OU
B
EGIN
Installing The Batteries
Step 1. Remove the battery cover by
pressing the tab and tilting
the cover upward.
Step 2. Install two AA batteries as
shown. Be sure to match the
/ signs on the batteries
with the / marks inside the case.
Note: Do Not mix new and used batteries or mix different types
of batteries together.
OPERATING KEYS LOCATIONS
Keys on this remote control operate functions similar to those on
your original remote controls. For specific key operation, such as
Recall or Display, refer to the original owner’s manuals for your
equipment.
2 3 5
OPERATING KEYS DESCRIPTIONS
1
Mode Keys—Use these keys to program the remote and to
select the operating mode (VCR, TV , or CABLE).
2
Video Mode KeyIn the TV mode, this key selects the
program source: TV or A/V jacks. In VCR mode, this key
functions as the TV/VCR key. This key has no function in
Cable mode.
3
Number KeysUse these keys to directly select channels
on your VCR, TV, or Cable Converter Box.
4
Recall Key—Press to switch between two channels.
5
Menu Key—Use this key with the / and /
keys to adjust the features of a Sanyo TV o n - s c r een menu
s y s t e m .
6
Mute Key—Press once to turn off the volume. Press again
to restore the volume.
7
V C R K e y s — These keys control Fast Forward (FF),
Rewind (REW), Play, Record, Stop, and Pause functions
of your VCR. They operate in all three modes.
8
Reset Key—Press this key twice to restore factory settings
on a Sanyo TV.
9
Sleep Key—Use this key to set the Sleep Timer on your TV.
10
Caption KeyP ress to select the caption mode: OFF,
C1, C2, T1, T2 or QUIKCAP on a Sanyo TV.
11
Channel ( / ) and Volume ( / ) Keys—Press to
scan through the channels and to adjust the volume.
12
Display Key—Press to display the Channel Number on the
Screen.
4
IMPORTANT NOTE: S P E N T OR DISCHARGED BATTERIES MUST BE RECYCLED OR
DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS. FOR DETA I L E D
I N F O R M ATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AU T H O R I T Y.
TV CODE
VCR CODE
CABLE BOX CODE
VCR BRAND NAME ....CODE NO.
ADMIRAL ..................20,21,27,29,38
AIWA ........................22
BROKSONIC ..............20,21
CRAIG........................02,05,07,31
CURTIS MATHES ......19,22,27
DAEWOO ..................04,37
EMERSON ................06,08,13,14,
..................................20,21,22
FISHER ......................00,01,02,09,10
FUNAI ........................22
GE..............................19,27,33,39,40
GOLDSTAR................08
HITACHI ....................03,22,33,39
J.C.PENNY ................03,05,07,19,31
JVC............................11,12,28,33
KENWOOD ................00,28,33
MAGNAVOX ..............18,19,26
MARTA ......................08
MEMOREX ................00,02,05,07,
..................................08,19,22,29,31
MITSUBISHI ..............32,34,35,36,
..................................41,42
M.WARD....................02,03,19,22,29
MTC ..........................05,07,22,31
NEC ..........................11,12,28,33
VCR BRAND NAME ....CODE NO.
ORION ......................13,15
PANASONIC ..............16,17,19
PHILCO......................18,19,26
PHILIPS ....................18,19,26
PIONEER ..................26,28
PROSCAN..................03,19,27,33,
..................................39,40
QUASAR ....................16,17,19
RCA ..........................03,19,27,33,
..................................39,40
REALISTIC ................00,05,07,08,
..................................19,22,29,31
SAMSUNG ................04,05,07,31
SANSUI ....................28,33
SANYO ......................00,01,02,09,10
SCOTT ......................04,20,21
SEARS ......................00,02,03,08,19
SHARP ......................29,30
SONY ........................19,23,24,25
SYLVANIA..................19,32
SYMPHONIC..............22
TEAC..........................22,23
TOSHIBA ..................04,32,40
ZENITH ......................23,24,38
1
2
3
4
7
8
9
10
11
12
6
5

Summary of content (2 pages)