INSTRUCTION MANUAL SC-150 SC-180 VACUUM CLEANER Contents IMPORTANT SAFETY INSTRUCTIONS 1,2 FEATURES 3 NAMES OF PARTS 4 ASSEMBLING THE VACUUM CLEANER USING THE VACUUM CLEANER 5 6,7 REPLACING THE PAPER BAG 8 PRODUCT MAINTENANCE 9 TROUBLESHOOTING 10 REPLACEMENT PARTS 10
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING - To reduce the risk of fire, electric shock or injury: Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. Do not use outdoors or on wet surfaces. Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not touch the agitator while it is spinning. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug dose not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. SAVE THESE INSTRUCTIONS This vacuum cleaner is intended for household use only.
FEATURES CLEANS CARPETS AND OTHER FLOORING Upholstery tool & Dusting brush Crevice tool CLEANING IN NARROW SPACES AND HARD-TO-REACH PLACES, SUCH AS UNDER BEDS, ETC. TABLETOP CLEANING AND CLEANING OF SLIDING WINDOW OR DOOR GROOVES, ETC.
NAMES OF PARTS FRONT SC-150 SC-180 Hole for wall-mountable storage Hole for wall-mountable storage Grip Grip Hose holder Hose holder Hose Hose Button Button Holding latch Holding latch ON/OFF switch ON/OFF switch Lever Floor nozzle Turbine brush Clip Crevice tool Cord storage hook Extension pipe Power cord Upholstery tool & Dusting brush REAR WARNING: Operate vacuum cleaner only at the voltage specified on nameplate.
ASSEMBLING THE VACUUM CLEANER Caution: Do not connect the power plug to the wall socket until assembly is completed. 1 Insert the hose into the main unit. 2 Attach the extension pipes and the floor nozzle as shown. Match the imprinted numbers as shown. 3 2 Click into place 1 REMOVAL REMOVAL Pull while pressing button. Rotate the rings in the direction shown by the arrows and pull pipes apart. Button 2 1 1 2 3 Fit the floor nozzle slot onto the floor nozzle mount.
USING THE VACUUM CLEANER ON/OFF SWITCH the ON/OFF switch to " "to 1 Set operate the vacuum cleaner. Set the ON/OFF switch to " 2 to stop the vacuum cleaner. " POWER CORD WINDING THE POWER CORD Hook the power cord over the clip which is located on the upper cord storage hook as shown. 1 2 Wind the power cord around the cord storage hooks. Clip Plug side Secure the power cord plug on the power cord. UNWINDING THE POWER CORD 1 Rotate the upper cord storage hook downward.
USING THE VACUUM CLENER UPHOLSTERY TOOL & DUSTING BRUSH(SC-180 only) Press the tabs downward to remove the dusting brush from the upholstery tool. Insert the front portion of the dusting brush into the groove located inside the front of the upholstery tool. Tabs Pull up on the tabs to reattach the dusting brush to the upholstery tool. After use, fix to the extension pipe for storage as shown in the illustration. TURBINE BRUSH (SC-180 only) The turbine brush has a lever with two positions.
REPLACING THE PAPER BAG Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect the power cord from the wall outlet when replacing the paper bag. Always make sure the paper bag is installed properly before using. 1 Pull the dust cover to remove it. 2 Remove the paper bag. Dust cover 3 Throw away the used paper bag. 4 Fold down both sides of the new bag. 5 Slide the bag collar of the new bag into track completely. 6 Return the dust cover to its original position.
PRODUCT MAINTENANCE Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect the power cord from the wall outlet before cleaning. MAIN UNIT a soft cloth with neutral Wipe the external surfaces 3 Wipe with a dry cloth. 1 Wet detergent solution and wring 2 of the unit. out excess liquid. NEUTRAL DETERGENT Caution: Do not use organic solvents, including thinner, or other strong cleaning liquids such as alkaline detergents.
TROUBLESHOOTING If there is a problem with the vacuum cleaner, carry out the following checks to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF switch to the " " position, disconnect the power cord from the wall outlet, and contact the place of purchase or your nearest Sanyo self-servicing dealer, or call(toll-free) 1-800-421-5013 (USA Only).
SANYO UPRIGHT VACUUM CLEANER LIMITED WARRANTY OBLIGATIONS (USA ONLY) In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
