User Guide

2 1A. Setting Up Service
⽧ Setting Up Your Phone (page 2)
⽧ Activating Your Phone (page 3)
⽧ Setting Up Your Voicemail (page 3)
⽧ Getting Help (page 4)
Setting Up Your Phone
1. Install the battery.
䡲
Insert the battery into the opening on the back of the
phone, making sure the connectors align ( ), and
gently press it down ( ).
䡲
Replace the battery cover and press it down until the
latch snaps into place ( and ).
2. Press and hold to turn the phone on.
䡲
If your phone is activated, it will turn on, search for
service, and enter standby mode.
䡲
If your phone is not yet activated, see “Activating Your
Phone” on page
3 for more information.
3. Make your first call.
䡲
Use your keyboard to enter a phone number.
䡲
Press .
1A. Setting Up Service
Note
Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge your
battery as soon as possible. See “Charging the Battery”
on page 13 for details.
PLS_Sanyo 2700_UG (080509)_PLS_UG 2009/08/05 19:37 ページ 2