User Manual

4.
Manual Tuning - Press and hold the SKIP
forward/backward buttons until the display
approaches your desired station. Then tap the
buttons repeatedly until the display shows the
exact frequency.
Auto tuning - Press the TUNING forward or
backward buttons momentarily and release.
The tuner will move up or down to the next
available station.
Press the POWER button to turn the system
'ON'.
1.
2.
Press the TUNER/BAND button to select the
radio function.
3.
Press the TUNER/BAND button repeatedly to
select AM or FM band.
1.
STORING PRESET STATIONS
The unit enables you to randomly preset 16 stations
for FM and 16 stations for AM band.
STEREO / MONO Function
Repeatedly pressing the button “ST / MO” switches between stereo and mono reception. The stereo
reception of a station in the FM band is indicated on the display.
In the case of stereo stations with a bad reception (noise infested reception) we recommend switching the
tuner to mono reception. Press the “ST / MO” button. In the display, the STEREO indicator disappears in
mono mode.
LISTENING TO THE RADIO
Example : FM mode
5.
When finished listening, press the POWER/
STANDBY button to shut the system OFF.
Press the SKIP forward or backward buttons to
tune to the desired station.
2.
Press the MEMORY button once.
4.
Press the MEMORY button again. The station
is stored in channel 2.
Tune to the station you wish to store.
3.
Press the PRESET/REPEAT button repeatedly
to set the desired preset station number.
5.
To store other stations, repeat above steps.
RECALLING PRESET STATION
Press the PRESET/REPEAT button repeatedly
to select the desired station.
21
FM
BAND
PRESET/
REPEAT
Switch on the power and press the PLAY/
PAUSE button to select the CD mode.
IN PLAY MODE
PRESS ONCE
PRESS TWICE
IN STOP MODE
PRESS ONCE
BACK TO THE
BEGINNING OF
THE CURRENT
TRACK
PREVIOUS
TRACK
PREVIOUS
TRACK
NEXT TRACK NEXT TRACK
Press and hold the SKIP button during playback.
:
: FAST BACKWARD : FAST FORWARD
NOTE : During the search mode low level audio will be heard to assist in locating the
correct point in the track.
PLAYING COMPACT DISCS
If there is no CD inside, a "NO DISC" display
will appear.
When there is no disc
1.
2.
Loading a disc
Press the CD DOOR OPEN/CLOSE button to
open the CD door.
To load a disc to 3 CD changer, simply put the
disc onto the center spindle of the player and
then press CD DOOR OPEN/CLOSE button
again to close the CD door. After that, reading
TOC will start.
After reading TOC (1st Disc)
To play the disc
Press PLAY/PAUSE button to play the CD.
Playing disc 1 track 1
To pause the playing
Press PLAY/PAUSE button while the disc is
playing, the playing time will flash.
While paused
To stop the disc playing
Press STOP button.
Stop condition (TOC display)
Skip and Search Function
Press the SKIP forward or backward buttons momentarily.
Ensure that the disc is correctly mounted on the
spindle and locked in place.
22
1.
2.