User Manual
–18–
3-10. L GUIDE ACT LEVER ASSEMBLY,
LOAD LEVER ASSEMBLY AND
STOPPER LEVER ASSEMBLY
(See Fig.3-10-1)
1) Refer to section 3-3 and remove the cassette mecha-
nism assembly.
2) Refer to sections 3-9-1 and 3-9-2 ,then remove the
pinch roller lever assembly and the opener mount-
ing.
3) Remove the stopper spring
.
4) After removing the washer
, remove the L guide act
spring
and the L guide act lever assembly .
5) Remove the special nut
, then remove the load lever
assembly
and the L guide lever spring .
6) Remove the stopper lever assembly
.
ASSEMBLY NOTES:
1) Apply grease (VHJ-0100) to the toothed area of the
L guide act lever assembly
and around the shafts
and .
2) Refer to section 4-3 and adjust the height of the load
lever assembly.
3) Hook the L guide lever spring
into the stopper
and the load lever assembly shown in Fig. A.
4) Put the pin
of the L guide act lever assembly into
the cam groove
of the crescent slide.
Fig.3-10-1
3-11. BT LEVER ASSEMBLY
(See Fig.3-11-1)
1) Refer to section 3-2 and remove the mechanism unit.
2) Refer to section 3-3-1 and remove the cassette mecha-
nism assembly.
3) Remove the BT spring
, and remove the sub BT
spring
on the underside of mechanism chassis.
4) Remove the clamp
on the underside of the mecha-
nism chassis, then remove the BT lever assembly
.
5) Remove the clamp
on the band brake assembly .
Then, as shown in Fig. A, align the other end of the
band brake assembly with the protruding parts of the
BT lever assembly
before removing it.
ASSEMBLY NOTES:
1. When fitting the BT lever assembly , be careful not
to bend the stopper
or the S incline mounting
assembly
out of shape by knocking it against them.
2. Hook the long hook of the BT spring
into the BT
lever assembly
, as shown in Fig. B.
4. After assembly, make sure that the mountings on
both ends of the band brake assembly
are
positioned as shown in Fig. C.
5. After assembly, refer to section 4-2-1, and make the
appropriate adjustment.
Fig.3-11-1
Special nut
L guide lever spring
Load lever
assembly
L guide
act lever
assembly
Stopper
lever assembly
Pin
Shaft
Stopper
Shaft
Cam
groove
Stopper spring
Washer
L guide
act spring
L guide
lever spring
Fig. A
Band brake
assembly
Clamp
Fig. A
Protruding
parts
Fig. B
BT
spring
Stopper
S incline
mounting
assembly
Fig. C
BT lever
assembly
Clamp
Fig. D
BT spring
lever
assembly
Sub BT
spring