User Manual

–20–
3-12-4.T SOFT BRAKE ASSEMBLY, TAKE UP REEL
ASSEMBLY, T REEL GEAR (See Fig.3-12-4)
1) Remove the T soft spring .
2) Remove the clamp
, then remove the T soft brake
assembly
.
3) Refer to section 3-12-2 and remove the clutch mount-
ing assembly.
4) Pressing the T brake assembly
in the direction of
the arrow, remove the take up reel assembly
,
washer
and the T reel gear .
ASSEMBLY NOTE:
1. After cleaning the shafts and , apply a drop of oil
(VHJ-0099) to each.
Fig.3-12-4
3-13. BRAKES
3-13-1.S BRAKE ASSEMBLY, T BRAKE
ASSEMBLY, T BRAKE ACT SLIDE
(See Fig.3-13-1)
1) Refer to section 3-3-1 and remove the cassette mecha-
nism assembly.
2) Remove the two clamps
, then remove the T
brake act slide
. (Note: You can remove the S brake
assembly
and the T brake assembly without re-
moving the T brake act slide
.)
3) Remove the brake spring
.
4) Remove the two clamps
simultaneously, then
remove the T brake assembly .
5) Remove the clamp
, then remove the S brake
assembly
.
ASSEMBLY NOTES:
1. Apply grease (VHJ-0100) to the shafts and .
2. When fitting the T brake act slide , align the mark
with the shaft .
Fig.3-13-1
Brake spring
T brake act slide
Mark
Clamp
S brake
assembly
Clamp
T brake
assembly
Clamp
Shaft
Shaft
Shaft
Clamps
T soft spring
T reel gear
Washer
T brake
assembly
Take up reel
assembly
Shaft
Clamp
T soft brake
assembly
Shaft