User Manual

–4–
Tape path surface Video head
Cylinder (Drum)
Fig. 2-1-1
Pinion gear
Lid opener spring
Release lever
Drive gear
Lock gear
Gear holder
Under frame
Door opener
lever
Special washer
Tray lock
spring
Washer
Stand L
Fig.1-2-2
1-2-2. CLEANING
1. Cylinder (Drum) (See Fig.1-2-2)
Moisten a chamois with methyl alcohol and clean the
video head and the tape path surface of the cylinder. Be
sure to wipe horizontally in relation to the video head. If
you wipe vertically, or use excessive force, you can
damage the video head.
2. Tape Path System / Reel Drive System
Clean the pinch roller, the capstan shaft, the tape guides,
the FE head, the ACE head, the reel table, the pulley and
the reel belt with a soft cloth, or chamois, moistened with
methyl alcohol.
NOTE: If the dirt on the tape guide cannot be cleaned off,
replace the tape guide.
2. AN OVERVIEW OF THE MECHANISM
2-1. NAMES OF THE MAIN PARTS
2-1-1. CASSETTE MECHANISM ASSEMBLY